| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <56736196.8050007@rock-chips.com>
Date: Fri, 18 Dec 2015 09:29:58 +0800
From: Caesar Wang <wxt@...k-chips.com>
To: Heiko Stübner <heiko@...ech.de>
Cc: Caesar Wang <wxt@...k-chips.com>, devicetree@...r.kernel.org,
Xing Zheng <zhengxing@...k-chips.com>,
linux-kernel@...r.kernel.org, linux-rockchip@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org, keescook@...gle.com,
leozwang@...gle.com
Subject: Re: [PATCH v1 1/6] ARM: dts: fix the correct pinctrl control for
rk3036
Heiko,
在 2015年12月18日 07:28, Heiko Stübner 写道:
> Am Donnerstag, 17. Dezember 2015, 22:21:47 schrieb Caesar Wang:
>> The pinctrl gpio pull up/down is incorrect since the rk3036 SoCs
>> can't set the status in the internal.
>>
>> We should keep the default status for enable the gpio status,
>> In fact, the pull_none is the disable the gpio pull up/down.
>>
>> Signed-off-by: Xing Zheng <zhengxing@...k-chips.com>
>> Signed-off-by: Caesar Wang <wxt@...k-chips.com>
> From the signed-off-by's I guess this change was created by Xing (author),
> right?
The original patch:
- pcfg_pull_up: pcfg-pull-up {
- bias-pull-up;
- };
-
- pcfg_pull_down: pcfg-pull-down {
- bias-pull-down;
+ pcfg_pull_default: pcfg_pull_default {
+ bias-pull-pin-default;
I'm re-writing the patch to fit the others.
Yep, the seem should change commit author as the
Signed-off-by: Xing Zheng <zhengxing@...k-chips.com>
>
> Heiko
>
>> ---
>>
>> arch/arm/boot/dts/rk3036.dtsi | 34 +++++++++++++++-------------------
>> 1 file changed, 15 insertions(+), 19 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
>> index f8758bf..620e6e0 100644
>> --- a/arch/arm/boot/dts/rk3036.dtsi
>> +++ b/arch/arm/boot/dts/rk3036.dtsi
>> @@ -427,12 +427,8 @@
>> #interrupt-cells = <2>;
>> };
>>
>> - pcfg_pull_up: pcfg-pull-up {
>> - bias-pull-up;
>> - };
>> -
>> - pcfg_pull_down: pcfg-pull-down {
>> - bias-pull-down;
>> + pcfg_pull_default: pcfg_pull_default {
>> + bias-pull-pin-default;
>> };
>>
>> pcfg_pull_none: pcfg-pull-none {
>> @@ -473,18 +469,18 @@
>> };
>>
>> emmc_cmd: emmc-cmd {
>> - rockchip,pins = <2 1 RK_FUNC_2 &pcfg_pull_none>;
>> + rockchip,pins = <2 1 RK_FUNC_2 &pcfg_pull_default>;
>> };
>>
>> emmc_bus8: emmc-bus8 {
>> - rockchip,pins = <1 24 RK_FUNC_2 &pcfg_pull_none>,
>> - <1 25 RK_FUNC_2 &pcfg_pull_none>,
>> - <1 26 RK_FUNC_2 &pcfg_pull_none>,
>> - <1 27 RK_FUNC_2 &pcfg_pull_none>,
>> - <1 28 RK_FUNC_2 &pcfg_pull_none>,
>> - <1 29 RK_FUNC_2 &pcfg_pull_none>,
>> - <1 30 RK_FUNC_2 &pcfg_pull_none>,
>> - <1 31 RK_FUNC_2 &pcfg_pull_none>;
>> + rockchip,pins = <1 24 RK_FUNC_2 &pcfg_pull_default>,
>> + <1 25 RK_FUNC_2 &pcfg_pull_default>,
>> + <1 26 RK_FUNC_2 &pcfg_pull_default>,
>> + <1 27 RK_FUNC_2 &pcfg_pull_default>,
>> + <1 28 RK_FUNC_2 &pcfg_pull_default>,
>> + <1 29 RK_FUNC_2 &pcfg_pull_default>,
>> + <1 30 RK_FUNC_2 &pcfg_pull_default>,
>> + <1 31 RK_FUNC_2 &pcfg_pull_default>;
>> };
>> };
>>
>> @@ -522,12 +518,12 @@
>>
>> uart0 {
>> uart0_xfer: uart0-xfer {
>> - rockchip,pins = <0 16 RK_FUNC_1 &pcfg_pull_up>,
>> + rockchip,pins = <0 16 RK_FUNC_1 &pcfg_pull_default>,
>> <0 17 RK_FUNC_1 &pcfg_pull_none>;
>> };
>>
>> uart0_cts: uart0-cts {
>> - rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_up>;
>> + rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_default>;
>> };
>>
>> uart0_rts: uart0-rts {
>> @@ -537,7 +533,7 @@
>>
>> uart1 {
>> uart1_xfer: uart1-xfer {
>> - rockchip,pins = <2 22 RK_FUNC_1 &pcfg_pull_none>,
>> + rockchip,pins = <2 22 RK_FUNC_1 &pcfg_pull_default>,
>> <2 23 RK_FUNC_1 &pcfg_pull_none>;
>> };
>> /* no rts / cts for uart1 */
>> @@ -545,7 +541,7 @@
>>
>> uart2 {
>> uart2_xfer: uart2-xfer {
>> - rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_none>,
>> + rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_default>,
>> <1 19 RK_FUNC_2 &pcfg_pull_none>;
>> };
>> /* no rts / cts for uart2 */
>
> _______________________________________________
> Linux-rockchip mailing list
> Linux-rockchip@...ts.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-rockchip
--
caesar wang | software engineer | wxt@...k-chip.com
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists