linux-kernel - [PATCH v3 0/3] Add basic support for Allwinner A83T SOC

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1450445451-311-1-git-send-email-vishnupatekar0510@gmail.com>
Date:	Fri, 18 Dec 2015 21:30:48 +0800
From:	Vishnu Patekar <vishnupatekar0510@...il.com>
To:	robh+dt@...nel.org, corbet@....net, pawel.moll@....com,
	mark.rutland@....com, ijc+devicetree@...lion.org.uk,
	galak@...eaurora.org, maxime.ripard@...e-electrons.com,
	linux@....linux.org.uk, emilio@...pez.com.ar,
	linus.walleij@...aro.org
Cc:	jenskuske@...il.com, hdegoede@...hat.com, wens@...e.org,
	devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
	linux-kernel@...r.kernel.org, linux-sunxi@...glegroups.com,
	linux-gpio@...r.kernel.org,
	Vishnu Patekar <vishnupatekar0510@...il.com>
Subject: [PATCH v3 0/3] Add basic support for Allwinner A83T SOC

This patch series adds very basic support for Allwinner A83T SOC.
Clock, peripherals, smp support will be added later.

Allwinner A83T is octa-core cortex-a7 based SoC.
It's clock control unit and prcm, pinmux are different from previous sun8i
series.
Its processor cores are arragned in two clusters 4 cores each,
similar to A80.

Note: A83T pincontroller patch is already applied by Linus, so not added in this
patch.

changes from v2->v3
1. removed "Not Supported" for A83T in sunxi/README
2. removed un-unsed nodes from dtsi.
3. corrected GIC_SPI number for PH_EINT in dtsi.
4. removed address at soc node which was un-necessary.
5. corrected reg<> addresses for cpu nodes.
6. changed cpu mask to 8 in gic and archtimer node.

changes from v1->v2:
1. used UART0 header with PB9, PB10 pins.
2. removed unnecessary includes and comments from dtsi.
3. arranged nodes in alphabatical order.
4. arrnaged compatible in alphabatical order.
5. changed cpu nodes to use cpu@100 -cpu@...3.
6. changed dts filename.

Vishnu Patekar (3):
  ARM: sunxi: Introduce Allwinner for A83T support
  ARM: dts: sun8i: Add Allwinner A83T dtsi
  ARM: dts: sun8i: Add A83T HomletV2 Board by Allwinner

 Documentation/arm/sunxi/README                     |   1 -
 Documentation/devicetree/bindings/arm/sunxi.txt    |   1 +
 arch/arm/boot/dts/Makefile                         |   1 +
 .../boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts  |  64 +++++++
 arch/arm/boot/dts/sun8i-a83t.dtsi                  | 206 +++++++++++++++++++++
 arch/arm/mach-sunxi/sunxi.c                        |   1 +
 drivers/clk/sunxi/clk-sunxi.c                      |   6 +
 7 files changed, 279 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts
 create mode 100644 arch/arm/boot/dts/sun8i-a83t.dtsi

-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/