linux-kernel - Re: [PATCH v3] serial: 8250: add gpio support to exar

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20151220171104.GA8471@sudip-laptop>
Date:	Sun, 20 Dec 2015 22:41:04 +0530
From:	Sudip Mukherjee <sudipm.mukherjee@...il.com>
To:	One Thousand Gnomes <gnomes@...rguk.ukuu.org.uk>
Cc:	Andy Shevchenko <andy.shevchenko@...il.com>,
	Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
	Jiri Slaby <jslaby@...e.com>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
	"linux-serial@...r.kernel.org" <linux-serial@...r.kernel.org>
Subject: Re: [PATCH v3] serial: 8250: add gpio support to exar

On Sun, Dec 20, 2015 at 04:41:31PM +0000, One Thousand Gnomes wrote:
> On Sun, 20 Dec 2015 20:17:22 +0530
> Sudip Mukherjee <sudipm.mukherjee@...il.com> wrote:
> 
> > On Sun, Dec 20, 2015 at 04:18:17PM +0200, Andy Shevchenko wrote:
> > > On Sun, Dec 20, 2015 at 3:24 PM, Sudip Mukherjee
> > > <sudipm.mukherjee@...il.com> wrote:
> > > > Exar XR17V352/354/358 chips have 16 multi-purpose inputs/outputs which
> > > > can be controlled using gpio interface.
> > > > Add support to use these pins and select GPIO_SYSFS also so that these
> > > > pins can be used from the userspace through sysfs.
> > > >
> > > > Tested-by: Rob Groner <rgroner@....com>
> > > > Signed-off-by: Sudip Mukherjee <sudip@...torindia.org>
> > > 
> > Hi Andy,
> > Thanks for the review. Just a few doubts below.
> > 
> > > > @@ -0,0 +1,261 @@
> > > > +/*
> > > > + * GPIO driver for Exar XR17V35X chip
> > > > + *
> > > > + * Copyright (C) 2015 Sudip Mukherjee <sudipm.mukherjee@...il.com>
> > > > + *
> > > > + * This program is free software; you can redistribute it and/or modify
> > > > + * it under the terms of the GNU General Public License version 2 as
> > > > + * published by the Free Software Foundation.
> > > > + */
> > <snip>
> > > > +
> > > > +err_destroy:
> > > > +       mutex_unlock(&exar_mtx);
> > > > +       mutex_destroy(&exar_gpio->lock);
> > > > +err_unmap:
> > > > +       iounmap(p);
> > > 
> > > pci_iounmap?
> > 
> > I thought about pci_iounmap but I saw that most of the code in
> > 8250_pci.c is using iounmap, so i went in favor of the majority.
> > Will change it.
> > 
> > > 
> > > > +       return ret;
> > > > +}
> > > > +EXPORT_SYMBOL(xr17v35x_gpio_init);
> > > > +
> > > 
> > > > +static void __exit exar_gpio_exit(void)
> > > > +{
> > > > +}
> > > > +
> > > > +module_exit(exar_gpio_exit);
> > > > +
> > > > +static int __init exar_gpio_init(void)
> > > > +{
> > > > +       return 0;
> > > > +}
> > > > +
> > > > +module_init(exar_gpio_init);
> > > > +
> > > 
> > > Useless for now. You are using it as a library.
> > 
> > Main doubt here. If I do not give the module_init() and module_exit()
> > then what entry do i keep in the Kconfig? In this v3, it is kept as
> > tristate. Should that be bool then? 
> 
> If you are linking it into the driver you don't need the module_init/exit
> gpio_init/exit methods. Your Kconfig becomes a bool and you combine the
> file into the driver based upon that bool.

But isn't it better to have the gpio code separete from the 8250 code?
But how do i combine a file? is it like:

#ifdef SERIAL_8250_EXAR_GPIO
#include "8250_gpio.c"
#endif

or should it be:

#ifdef SERIAL_8250_EXAR_GPIO

all c code

#endif

regards
sudip


> 
> Alan
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/