| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1450636567-2040-11-git-send-email-plaes@plaes.org>
Date: Sun, 20 Dec 2015 20:36:04 +0200
From: Priit Laes <plaes@...es.org>
To: Thomas Petazzoni <thomas.petazzoni@...e-electrons.com>,
Noralf Trønnes <noralf@...nnes.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc: devel@...verdev.osuosl.org, linux-kernel@...r.kernel.org,
Priit Laes <plaes@...es.org>
Subject: [PATCH 10/13] staging: fbtft: Use standard MIPI DCS command defines for st7735r
This patch makes use of the standard MIPI Display Command Set to remove
some of the magic constants found in source code.
Signed-off-by: Priit Laes <plaes@...es.org>
---
drivers/staging/fbtft/fb_st7735r.c | 42 ++++++++++++++++++--------------------
1 file changed, 20 insertions(+), 22 deletions(-)
diff --git a/drivers/staging/fbtft/fb_st7735r.c b/drivers/staging/fbtft/fb_st7735r.c
index a92b0d0..c5e51fe 100644
--- a/drivers/staging/fbtft/fb_st7735r.c
+++ b/drivers/staging/fbtft/fb_st7735r.c
@@ -17,6 +17,7 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
+#include <video/mipi_display.h>
#include "fbtft.h"
@@ -25,12 +26,10 @@
"0F 1B 0F 17 33 2C 29 2E 30 30 39 3F 00 07 03 10"
static int default_init_sequence[] = {
- /* SWRESET - Software reset */
- -1, 0x01,
+ -1, MIPI_DCS_SOFT_RESET,
-2, 150, /* delay */
- /* SLPOUT - Sleep out & booster on */
- -1, 0x11,
+ -1, MIPI_DCS_EXIT_SLEEP_MODE,
-2, 500, /* delay */
/* FRMCTR1 - frame rate control: normal mode
@@ -71,18 +70,14 @@ static int default_init_sequence[] = {
/* VMCTR1 - Power Control */
-1, 0xC5, 0x0E,
- /* INVOFF - Display inversion off */
- -1, 0x20,
+ -1, MIPI_DCS_EXIT_INVERT_MODE,
- /* COLMOD - Interface pixel format */
- -1, 0x3A, 0x05,
+ -1, MIPI_DCS_SET_PIXEL_FORMAT, MIPI_DCS_PIXEL_FMT_16BIT,
- /* DISPON - Display On */
- -1, 0x29,
+ -1, MIPI_DCS_SET_DISPLAY_ON,
-2, 100, /* delay */
- /* NORON - Partial off (Normal) */
- -1, 0x13,
+ -1, MIPI_DCS_ENTER_NORMAL_MODE,
-2, 10, /* delay */
/* end marker */
@@ -91,14 +86,13 @@ static int default_init_sequence[] = {
static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye)
{
- /* Column address */
- write_reg(par, 0x2A, xs >> 8, xs & 0xFF, xe >> 8, xe & 0xFF);
+ write_reg(par, MIPI_DCS_SET_COLUMN_ADDRESS,
+ xs >> 8, xs & 0xFF, xe >> 8, xe & 0xFF);
- /* Row address */
- write_reg(par, 0x2B, ys >> 8, ys & 0xFF, ye >> 8, ye & 0xFF);
+ write_reg(par, MIPI_DCS_SET_PAGE_ADDRESS,
+ ys >> 8, ys & 0xFF, ye >> 8, ye & 0xFF);
- /* Memory write */
- write_reg(par, 0x2C);
+ write_reg(par, MIPI_DCS_WRITE_MEMORY_START);
}
#define MY BIT(7)
@@ -114,16 +108,20 @@ static int set_var(struct fbtft_par *par)
RGB-BGR ORDER color filter panel: 0=RGB, 1=BGR */
switch (par->info->var.rotate) {
case 0:
- write_reg(par, 0x36, MX | MY | (par->bgr << 3));
+ write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
+ MX | MY | (par->bgr << 3));
break;
case 270:
- write_reg(par, 0x36, MY | MV | (par->bgr << 3));
+ write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
+ MY | MV | (par->bgr << 3));
break;
case 180:
- write_reg(par, 0x36, par->bgr << 3);
+ write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
+ par->bgr << 3);
break;
case 90:
- write_reg(par, 0x36, MX | MV | (par->bgr << 3));
+ write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
+ MX | MV | (par->bgr << 3));
break;
}
--
2.6.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists