lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-id: <1450699494-4598-1-git-send-email-vikas.bansal@samsung.com>
Date:	Mon, 21 Dec 2015 17:34:54 +0530
From:	Vikas Bansal <vikas.bansal@...sung.com>
To:	oneukum@...e.de, netdev@...r.kernel.org, linux-usb@...r.kernel.org,
	linux-kernel@...r.kernel.org
Cc:	sumit.batra@...sung.com, Vikas Bansal <vikas.bansal@...sung.com>
Subject: [PATCH] BugFix in XHCI controller driver for scatter gather DMA

Pre-Condition
At the time of reset resume of a USB device, both self and bus powered devices might go to a low power state or power off state depending on the acceptable suspend time power of the system.    
In case the device experiences a power glitch or completely powers off during suspend-resume, the device will lose its internal state and hence it'll again need a set interface from class driver on reset resume operation.

Issue 
So far our experiments were based on a USB gadget working on cdc_eem protocol. 
We have seen that device is unable to continue the packet transfer on bulk endpoints after the reset resume operation.

Solution
We have added a .reset_resume function for cdc_eem protocol which sends a set interface command on the Control endpoint. And calls the existing usbnet_resume thereafter


Signed-off-by: Vikas Bansal <vikas.bansal@...sung.com>
Signed-off-by: Sumit Batra <sumit.batra@...sung.com>
diff --git a/drivers/net/usb/cdc_eem.c b/drivers/net/usb/cdc_eem.c
index f7180f8..1f6f7ea 100644
--- a/drivers/net/usb/cdc_eem.c
+++ b/drivers/net/usb/cdc_eem.c
@@ -342,6 +342,19 @@ next:
 	return 1;
 }
 
+static int cdc_eem_resume(struct usb_interface *intf)
+{
+	int ret = 0;
+	struct usbnet *dev = usb_get_intfdata(intf);
+
+	ret = usbnet_get_endpoints(dev, intf);
+	if(ret < 0)
+		goto err;
+	ret = usbnet_resume(intf);
+err:
+	return ret;
+}
+
 static const struct driver_info eem_info = {
 	.description =	"CDC EEM Device",
 	.flags =	FLAG_ETHER | FLAG_POINTTOPOINT,
@@ -371,6 +384,7 @@ static struct usb_driver eem_driver = {
 	.disconnect =	usbnet_disconnect,
 	.suspend =	usbnet_suspend,
 	.resume =	usbnet_resume,
+	.reset_resume =	cdc_eem_resume,
 	.disable_hub_initiated_lpm = 1,
 };
 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ