linux-kernel - Re: [PATCH 1/7] printk: Hand over printing to console if printing too long

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20151222134730.GD7266@quack.suse.cz>
Date:	Tue, 22 Dec 2015 14:47:30 +0100
From:	Jan Kara <jack@...e.cz>
To:	Sergey Senozhatsky <sergey.senozhatsky@...il.com>
Cc:	Andrew Morton <akpm@...ux-foundation.org>,
	Petr Mladek <pmladek@...e.cz>,
	KY Sri nivasan <kys@...rosoft.com>,
	Steven Rostedt <rostedt@...dmis.org>,
	linux-kernel@...r.kernel.org,
	Sergey Senozhatsky <sergey.senozhatsky.work@...il.com>
Subject: Re: [PATCH 1/7] printk: Hand over printing to console if printing
 too long

On Thu 10-12-15 23:52:51, Sergey Senozhatsky wrote:
> Hello,
> 
> *** in this email and in every later emails ***
>     Sorry, if I messed up with Cc list or message-ids. It's suprisingly
> hard to jump in into a loop that has never been in your inbox. It took
> some `googling' effort.
> 
> I haven't tested the patch set yet, I just 'ported' it to linux-next.
> I reverted 073696a8bc7779b ("printk: do cond_resched() between lines while
> outputting to consoles") as a first step, but it comes in later again. I can
> send out the updated series (off list is OK).
> 
> > Currently, console_unlock() prints messages from kernel printk buffer to
> > console while the buffer is non-empty. When serial console is attached,
> > printing is slow and thus other CPUs in the system have plenty of time
> > to append new messages to the buffer while one CPU is printing. Thus the
> > CPU can spend unbounded amount of time doing printing in console_unlock().
> > This is especially serious problem if the printk() calling
> > console_unlock() was called with interrupts disabled.
> >
> > In practice users have observed a CPU can spend tens of seconds printing
> > in console_unlock() (usually during boot when hundreds of SCSI devices
> > are discovered) resulting in RCU stalls (CPU doing printing doesn't
> > reach quiescent state for a long time), softlockup reports (IPIs for the
> > printing CPU don't get served and thus other CPUs are spinning waiting
> > for the printing CPU to process IPIs), and eventually a machine death
> > (as messages from stalls and lockups append to printk buffer faster than
> > we are able to print). So these machines are unable to boot with serial
> > console attached. Also during artificial stress testing SATA disk
> > disappears from the system because its interrupts aren't served for too
> > long.
> >
> > This patch implements a mechanism where after printing specified number
> > of characters (tunable as a kernel parameter printk.offload_chars), CPU
> > doing printing asks for help by waking up one of dedicated kthreads.  As
> > soon as the printing CPU notices kthread got scheduled and is spinning
> > on print_lock dedicated for that purpose, it drops console_sem,
> > print_lock, and exits console_unlock(). Kthread then takes over printing
> > instead. This way no CPU should spend printing too long even if there
> > is heavy printk traffic.
> >
> > Signed-off-by: Jan Kara <jack@...e.cz>
> 
> I think we better use raw_spin_lock as a print_lock; and, apart from that,
> seems that we don't re-init in zap_lock(). So I ended up with the following
> patch on top of yours (to be folded):
> 
> - use raw_spin_lock
> - do not forget to re-init `print_lock' in zap_locks()

Thanks for looking into my patches and sorry for replying with a delay. As
I wrote in my previous email [1] even the referenced patches are not quite
enough. Over last few days I have worked on redoing the stuff as we
discussed with Linus and Andrew at Kernel Summit and I have new patches
which are working fine for me. I still want to test them on some machines
having real issues with udev during boot but so far stress-testing with
serial console slowed down to ~1000 chars/sec on other machines and VMs
looks promising.

I'm attaching them in case you want to have a look. They are on top of
Tejun's patch adding cond_resched() (which is essential). I'll officially
submit the patches once the testing is finished (but I'm not sure when I
get to the problematic HW...).

								Honza

[1] http://www.spinics.net/lists/stable/msg111535.html
-- 
Jan Kara <jack@...e.com>
SUSE Labs, CR

View attachment "0001-printk-Make-printk-completely-async.patch" of type "text/x-patch" (8977 bytes)

View attachment "0002-printk-Skip-messages-on-oops.patch" of type "text/x-patch" (2754 bytes)