[<prev] [next>] [day] [month] [year] [list]
Message-ID: <56798A85.30706@kernel.org>
Date: Tue, 22 Dec 2015 17:38:13 +0000
From: Jonathan Cameron <jic23@...nel.org>
To: "Andrew F. Davis" <afd@...com>, Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Hartmut Knaack <knaack.h@....de>,
Lars-Peter Clausen <lars@...afoo.de>,
Peter Meerwald <pmeerw@...erw.net>
Cc: devicetree@...r.kernel.org, linux-iio@...r.kernel.org,
linux-api@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3 4/5] Documentation: afe4403: Add DT bindings for the
AFE4403 heart monitor
On 14/12/15 22:36, Andrew F. Davis wrote:
> Add the TI AFE4403 heart monitor DT bindings documentation.
>
> Signed-off-by: Andrew F. Davis <afd@...com>
Nothing terribly controversial in here that I can spot
so looks good to me.
Jonathan
> ---
> .../devicetree/bindings/iio/health/afe4403.txt | 34 ++++++++++++++++++++++
> 1 file changed, 34 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/health/afe4403.txt
>
> diff --git a/Documentation/devicetree/bindings/iio/health/afe4403.txt b/Documentation/devicetree/bindings/iio/health/afe4403.txt
> new file mode 100644
> index 0000000..2fffd70
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/health/afe4403.txt
> @@ -0,0 +1,34 @@
> +Texas Instruments AFE4403 Heart rate and Pulse Oximeter
> +
> +Required properties:
> + - compatible : Should be "ti,afe4403".
> + - reg : SPI chip select address of device.
> + - tx-supply : Regulator supply to transmitting LEDs.
> + - interrupt-parent : Phandle to he parent interrupt controller.
> + - interrupts : The interrupt line the device ADC_RDY pin is
> + connected to. For details refer to,
> + ../../interrupt-controller/interrupts.txt.
> +
> +Optional properties:
> + - reset-gpios : GPIO used to reset the device.
> + For details refer to, ../../gpio/gpio.txt.
> +
> +For other required and optional properties of SPI slave nodes
> +please refer to ../../spi/spi-bus.txt.
> +
> +Example:
> +
> +&spi0 {
> + heart_mon@0 {
> + compatible = "ti,afe4403";
> + reg = <0>;
> + spi-max-frequency = <10000000>;
> +
> + tx-supply = <&vbat>;
> +
> + interrupt-parent = <&gpio1>;
> + interrupts = <28 IRQ_TYPE_EDGE_RISING>;
> +
> + reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
> + };
> +};
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists