| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <5679B1B1.5050206@interlog.com>
Date: Tue, 22 Dec 2015 15:25:21 -0500
From: Douglas Gilbert <dgilbert@...erlog.com>
To: Rasmus Villemoes <linux@...musvillemoes.dk>,
Christoph Hellwig <hch@...radead.org>,
Hannes Reinecke <hare@...e.de>,
Bart Van Assche <bart.vanassche@...disk.com>,
"James E.J. Bottomley" <JBottomley@...n.com>,
Julian Calaby <julian.calaby@...il.com>
Cc: linux-scsi@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 1/3] scsi: make some Additional Sense strings more
grep'able
On 15-11-24 04:42 AM, Rasmus Villemoes wrote:
> There's little point in breaking these strings over multiple lines.
>
> Signed-off-by: Rasmus Villemoes <linux@...musvillemoes.dk>
Tested-by: Douglas Gilbert <dgilbert@...erlog.com>
> ---
> drivers/scsi/constants.c | 27 +++++++++------------------
> 1 file changed, 9 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/scsi/constants.c b/drivers/scsi/constants.c
> index fa09d4be2b53..58d94e3c3713 100644
> --- a/drivers/scsi/constants.c
> +++ b/drivers/scsi/constants.c
> @@ -346,11 +346,9 @@ static const struct error_info additional[] =
> {0x0407, "Logical unit not ready, operation in progress"},
> {0x0408, "Logical unit not ready, long write in progress"},
> {0x0409, "Logical unit not ready, self-test in progress"},
> - {0x040A, "Logical unit not accessible, asymmetric access state "
> - "transition"},
> + {0x040A, "Logical unit not accessible, asymmetric access state transition"},
> {0x040B, "Logical unit not accessible, target port in standby state"},
> - {0x040C, "Logical unit not accessible, target port in unavailable "
> - "state"},
> + {0x040C, "Logical unit not accessible, target port in unavailable state"},
> {0x040D, "Logical unit not ready, structure check required"},
> {0x040E, "Logical unit not ready, security session in progress"},
> {0x0410, "Logical unit not ready, auxiliary memory not accessible"},
> @@ -363,11 +361,9 @@ static const struct error_info additional[] =
> {0x0417, "Logical unit not ready, calibration required"},
> {0x0418, "Logical unit not ready, a door is open"},
> {0x0419, "Logical unit not ready, operating in sequential mode"},
> - {0x041A, "Logical unit not ready, start stop unit command in "
> - "progress"},
> + {0x041A, "Logical unit not ready, start stop unit command in progress"},
> {0x041B, "Logical unit not ready, sanitize in progress"},
> - {0x041C, "Logical unit not ready, additional power use not yet "
> - "granted"},
> + {0x041C, "Logical unit not ready, additional power use not yet granted"},
> {0x041D, "Logical unit not ready, configuration in progress"},
> {0x041E, "Logical unit not ready, microcode activation required"},
> {0x041F, "Logical unit not ready, microcode download required"},
> @@ -559,8 +555,7 @@ static const struct error_info additional[] =
> {0x2300, "Invalid token operation, cause not reportable"},
> {0x2301, "Invalid token operation, unsupported token type"},
> {0x2302, "Invalid token operation, remote token usage not supported"},
> - {0x2303, "Invalid token operation, remote rod token creation not "
> - "supported"},
> + {0x2303, "Invalid token operation, remote rod token creation not supported"},
> {0x2304, "Invalid token operation, token unknown"},
> {0x2305, "Invalid token operation, token corrupt"},
> {0x2306, "Invalid token operation, token revoked"},
> @@ -641,8 +636,7 @@ static const struct error_info additional[] =
> {0x2A0D, "Data encryption capabilities changed"},
> {0x2A10, "Timestamp changed"},
> {0x2A11, "Data encryption parameters changed by another i_t nexus"},
> - {0x2A12, "Data encryption parameters changed by vendor specific "
> - "event"},
> + {0x2A12, "Data encryption parameters changed by vendor specific event"},
> {0x2A13, "Data encryption key instance counter has changed"},
> {0x2A14, "SA creation capabilities data has changed"},
> {0x2A15, "Medium removal prevention preempted"},
> @@ -759,8 +753,7 @@ static const struct error_info additional[] =
> {0x3B19, "Element enabled"},
> {0x3B1A, "Data transfer device removed"},
> {0x3B1B, "Data transfer device inserted"},
> - {0x3B1C, "Too many logical objects on partition to support "
> - "operation"},
> + {0x3B1C, "Too many logical objects on partition to support operation"},
>
> {0x3D00, "Invalid bits in identify message"},
>
> @@ -957,8 +950,7 @@ static const struct error_info additional[] =
> {0x5D39, "Data channel impending failure throughput performance"},
> {0x5D3A, "Data channel impending failure seek time performance"},
> {0x5D3B, "Data channel impending failure spin-up retry count"},
> - {0x5D3C, "Data channel impending failure drive calibration retry "
> - "count"},
> + {0x5D3C, "Data channel impending failure drive calibration retry count"},
> {0x5D40, "Servo impending failure general hard drive failure"},
> {0x5D41, "Servo impending failure drive error rate too high"},
> {0x5D42, "Servo impending failure data error rate too high"},
> @@ -1070,8 +1062,7 @@ static const struct error_info additional[] =
>
> {0x6E00, "Command to logical unit failed"},
>
> - {0x6F00, "Copy protection key exchange failure - authentication "
> - "failure"},
> + {0x6F00, "Copy protection key exchange failure - authentication failure"},
> {0x6F01, "Copy protection key exchange failure - key not present"},
> {0x6F02, "Copy protection key exchange failure - key not established"},
> {0x6F03, "Read of scrambled sector without authentication"},
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists