[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <CAOJe8K3GWxAY1b+4oDeL6VwbEBXdFV6ZewnARPGuqGKekBQkJA@mail.gmail.com>
Date: Thu, 24 Dec 2015 00:55:39 +0300
From: Denis Kirjanov <kda@...ux-powerpc.org>
To: Zhang Zhuoyu <zhangzhuoyu@...s.chinamobile.com>
Cc: Michael Ellerman <mpe@...erman.id.au>,
linux-kernel@...r.kernel.org, paulus@...ba.org, tglx@...utronix.de,
linuxppc-dev@...ts.ozlabs.org, jiang.liu@...ux.intel.com,
Daniel Axtens <dja@...ens.net>
Subject: Re: [PATCH 1/1] powerpc/irq: tidy up inconsistent context in migrate_irqs()
On 12/23/15, Zhang Zhuoyu <zhangzhuoyu@...s.chinamobile.com> wrote:
> Hi, Denis
>
> Any test result on pmac machine for this patch?
Hi,
So I ran the tests by writing to cpuN/online.
with your change I'm observing lines like the following:
[ 713.436922] NOHZ: local_softirq_pending 08
Thanks!
>
> Zhuoyu
>
>> -----Original Message-----
>> From: Zhang Zhuoyu [mailto:zhangzhuoyu@...s.chinamobile.com]
>> Sent: Wednesday, December 16, 2015 10:46 PM
>> To: 'Denis Kirjanov'; 'Michael Ellerman'
>> Cc: 'Daniel Axtens'; 'Zhang Zhuoyu'; 'benh@...nel.crashing.org';
>> 'paulus@...ba.org'; 'tglx@...utronix.de'; 'jiang.liu@...ux.intel.com';
>> 'linuxppc-dev@...ts.ozlabs.org'; 'linux-kernel@...r.kernel.org'
>> Subject: RE: [PATCH 1/1] powerpc/irq: tidy up inconsistent context in
>> migrate_irqs()
>>
>>
>> > -----Original Message-----
>> > From: Denis Kirjanov [mailto:kda@...ux-powerpc.org]
>> > Sent: Wednesday, December 16, 2015 7:55 PM
>> > To: Michael Ellerman
>> > Cc: Daniel Axtens; Zhang Zhuoyu; benh@...nel.crashing.org;
>> > paulus@...ba.org; tglx@...utronix.de; jiang.liu@...ux.intel.com;
>> > zhangzhuoyu@...s.chinamobile.com; linuxppc-dev@...ts.ozlabs.org;
>> > linux- kernel@...r.kernel.org
>> > Subject: Re: [PATCH 1/1] powerpc/irq: tidy up inconsistent context in
>> > migrate_irqs()
>> >
>> > On 12/16/15, Michael Ellerman <mpe@...erman.id.au> wrote:
>> > > On Wed, 2015-12-16 at 17:08 +1100, Daniel Axtens wrote:
>> > >> Hi,
>> > >>
>> > >> A couple of things.
>> > >>
>> > >> Firstly, your two email addresses don't match:
>> > >>
>> > >> Zhang Zhuoyu <hellozzy1988@....com> writes:
>> > >
>> > >> > From: Zhang Zhuoyu <zhangzhuoyu@...s.chinamobile.com>
>> > >>
>>
>> Mmm, My mistake, I will correct it next time.
>>
>> > >> These lines do seem odd! Are they causing a problem?
>> > >>
>> > >> I'd be more comfortable removing them if I understood why they were
>> > >> added. But they've been around since the beginning of git history
>> > >> so that could be a bit difficult.
>> > >
>> > > It's in the fullhist tree, but that doesn't tell us much (below,
>> > > named fixup_irqs()).
>> > >
>> > > But I suspect those lines are actually there very deliberately.
>> > >
>> > > The function is migrating interrupts off the recently offlined cpu,
>> > > because we don't want to take interrupts on an offline cpu.
>> > >
>> > > After it's finished doing the migration, it wants to make sure there
>> > > are no interrupts that have already been latched by the offline cpu.
>> > > So it briefly enables interrupts, waits a bit for the interrupts to
>> > > fire, and the disables them again.
>> > >
>> > > Whether that actually works I couldn't say, it is very old code, and
>> > > it's used on platforms where I don't ever test cpu hotplug (85xx &
>> > > powermac).
>> >
>> > Yeah, it would be nice to test this change. I'll try it on my
>> > quad-core pmac machine
>> >
>>
>> Thanks Michael for help explaining the code logic, it also resolved my
>> doubts.
>> These snippets are suspected when I did PM benchmark on FSL MPC85xx
>> series(T1040, T4240), For T4240, which has 24 CPUs, it waits 1ms in
>> migrate_irqs()each time a CPU is plugged offline, it seems a waste of
>> time. I
>> also did a test on T1040, after plugging offline/online CPU hundreds of
>> times,
>> system works well. If you have any other suggestion on how to test, I'd
>> like
>> to do more benchmark.
>> (1)for((i=0; i<1000; i++)); do echo 0 >
>> /sys/devices/system/cpu/cpu1/online;
>> sleep 1; echo 1 > /sys/devices/system/cpu/cpu1/online; done
>> (2)root@...40rdb:~# cat /proc/interrupts
>> CPU0 CPU1 CPU2 CPU3
>> 36: 393 1 223 1 OpenPIC 36 Level
>> serial
>> LOC: 1946 1486 1555 1361 Local timer interrupts
>> DBL: 7371 9707 9390 7568 Doorbell interrupts
>> (3)root@...40rdb:~# ps
>> PID TTY TIME CMD
>> 2751 ttyS0 00:00:00 sh
>> 2757 ttyS0 00:00:00 ps
>> root@...40rdb:~# taskset -pc 1 2751
>> pid 2751's current affinity list: 0-3
>> pid 2751's new affinity list: 1
>> root@...40rdb:~#
>> root@...40rdb:~#
>> root@...40rdb:~#
>> root@...40rdb:~# echo "hello"
>> hello
>> root@...40rdb:~#
>>
>> > >
>> > > cheers
>> > >
>> > >
>> > > commit d58830b9a740ad1c3b089196d4afdaea251dc701
>> > > Author: Zwane Mwaikambo <zwane@....linux.org.uk>
>> > > Date: Fri Mar 4 17:34:00 2005 -0800
>> > >
>> > > [PATCH] ppc64: generic hotplug cpu support
>> > >
>> > > Patch provides a generic hotplug cpu implementation, with the
>> > > only current
>> > > user being pmac. This doesn't replace real hotplug code as is
>> > > currently
>> > > used by LPAR systems. Ben i can add the additional pmac
>> > > specific code to
>> > > put the processor into a sleeping state seperately. Thanks to
>> > > Nathan for
>> > > testing.
>> > >
>> > > Signed-off-by: Zwane Mwaikambo <zwane@....linux.org.uk>
>> > > Signed-off-by: Andrew Morton <akpm@...l.org>
>> > > Signed-off-by: Linus Torvalds <torvalds@...l.org>
>> > >
>> > > diff --git a/arch/ppc64/Kconfig b/arch/ppc64/Kconfig index
>> > > a7933ab62e98..861f4460ad02 100644
>> > > --- a/arch/ppc64/Kconfig
>> > > +++ b/arch/ppc64/Kconfig
>> > > @@ -313,7 +313,7 @@ source "drivers/pci/Kconfig"
>> > >
>> > > config HOTPLUG_CPU
>> > > bool "Support for hot-pluggable CPUs"
>> > > - depends on SMP && EXPERIMENTAL && PPC_PSERIES
>> > > + depends on SMP && EXPERIMENTAL && (PPC_PSERIES ||
>> > PPC_PMAC)
>> > > select HOTPLUG
>> > > ---help---
>> > > Say Y here to be able to turn CPUs off and on.
>> > > diff --git a/arch/ppc64/kernel/idle.c b/arch/ppc64/kernel/idle.c
>> > > index 398b4682127b..51eb6af14a8f 100644
>> > > --- a/arch/ppc64/kernel/idle.c
>> > > +++ b/arch/ppc64/kernel/idle.c
>> > > @@ -293,6 +293,10 @@ static int native_idle(void)
>> > > power4_idle();
>> > > if (need_resched())
>> > > schedule();
>> > > +
>> > > + if (cpu_is_offline(smp_processor_id()) &&
>> > > + system_state == SYSTEM_RUNNING)
>> > > + cpu_die();
>> > > }
>> > > return 0;
>> > > }
>> > > diff --git a/arch/ppc64/kernel/irq.c b/arch/ppc64/kernel/irq.c index
>> > > 0ea8016146a2..4fd7f203c1e3 100644
>> > > --- a/arch/ppc64/kernel/irq.c
>> > > +++ b/arch/ppc64/kernel/irq.c
>> > > @@ -116,6 +116,35 @@ skip:
>> > > return 0;
>> > > }
>> > >
>> > > +#ifdef CONFIG_HOTPLUG_CPU
>> > > +void fixup_irqs(cpumask_t map)
>> > > +{
>> > > + unsigned int irq;
>> > > + static int warned;
>> > > +
>> > > + for_each_irq(irq) {
>> > > + cpumask_t mask;
>> > > +
>> > > + if (irq_desc[irq].status & IRQ_PER_CPU)
>> > > + continue;
>> > > +
>> > > + cpus_and(mask, irq_affinity[irq], map);
>> > > + if (any_online_cpu(mask) == NR_CPUS) {
>> > > + printk("Breaking affinity for irq %i\n", irq);
>> > > + mask = map;
>> > > + }
>> > > + if (irq_desc[irq].handler->set_affinity)
>> > > + irq_desc[irq].handler->set_affinity(irq, mask);
>> > > + else if (irq_desc[irq].action && !(warned++))
>> > > + printk("Cannot set affinity for irq %i\n", irq);
>> > > + }
>> > > +
>> > > + local_irq_enable();
>> > > + mdelay(1);
>> > > + local_irq_disable();
>> > > +}
>> > > +#endif
>> > > +
>> > > extern int noirqdebug;
>> > >
>> > > /*
>> > > diff --git a/arch/ppc64/kernel/pSeries_setup.c
>> > > b/arch/ppc64/kernel/pSeries_setup.c
>> > > index f603397b7b04..0426892749c6 100644
>> > > --- a/arch/ppc64/kernel/pSeries_setup.c
>> > > +++ b/arch/ppc64/kernel/pSeries_setup.c
>> > > @@ -320,8 +320,9 @@ static void __init pSeries_discover_pic(void)
>> > > }
>> > > }
>> > >
>> > > -static void pSeries_cpu_die(void)
>> > > +static void pSeries_mach_cpu_die(void)
>> > > {
>> > > + idle_task_exit();
>> > > local_irq_disable();
>> > > /* Some hardware requires clearing the CPPR, while other hardware
>> > does not
>> > > * it is safe either way
>> > > @@ -599,7 +600,7 @@ struct machdep_calls __initdata pSeries_md = {
>> > > .power_off = rtas_power_off,
>> > > .halt = rtas_halt,
>> > > .panic = rtas_os_term,
>> > > - .cpu_die = pSeries_cpu_die,
>> > > + .cpu_die = pSeries_mach_cpu_die,
>> > > .get_boot_time = pSeries_get_boot_time,
>> > > .get_rtc_time = pSeries_get_rtc_time,
>> > > .set_rtc_time = pSeries_set_rtc_time,
>> > > diff --git a/arch/ppc64/kernel/pmac_setup.c
>> > > b/arch/ppc64/kernel/pmac_setup.c index 41fa6e95a06f..5c56fc956245
>> > > 100644
>> > > --- a/arch/ppc64/kernel/pmac_setup.c
>> > > +++ b/arch/ppc64/kernel/pmac_setup.c
>> > > @@ -439,6 +439,9 @@ static int __init pmac_probe(int platform) }
>> > >
>> > > struct machdep_calls __initdata pmac_md = {
>> > > +#ifdef CONFIG_HOTPLUG_CPU
>> > > + .cpu_die = generic_mach_cpu_die,
>> > > +#endif
>> > > .probe = pmac_probe,
>> > > .setup_arch = pmac_setup_arch,
>> > > .init_early = pmac_init_early,
>> > > diff --git a/arch/ppc64/kernel/pmac_smp.c
>> > > b/arch/ppc64/kernel/pmac_smp.c index e0b37079943c..c27588ede2fe
>> > 100644
>> > > --- a/arch/ppc64/kernel/pmac_smp.c
>> > > +++ b/arch/ppc64/kernel/pmac_smp.c
>> > > @@ -308,4 +308,9 @@ struct smp_ops_t core99_smp_ops __pmacdata =
>> {
>> > > void __init pmac_setup_smp(void) {
>> > > smp_ops = &core99_smp_ops;
>> > > +#ifdef CONFIG_HOTPLUG_CPU
>> > > + smp_ops->cpu_enable = generic_cpu_enable;
>> > > + smp_ops->cpu_disable = generic_cpu_disable;
>> > > + smp_ops->cpu_die = generic_cpu_die; #endif
>> > > }
>> > > diff --git a/arch/ppc64/kernel/setup.c b/arch/ppc64/kernel/setup.c
>> > > index d98c320828e5..078c3551ce8a 100644
>> > > --- a/arch/ppc64/kernel/setup.c
>> > > +++ b/arch/ppc64/kernel/setup.c
>> > > @@ -1377,9 +1377,6 @@ early_param("xmon", early_xmon);
>> > >
>> > > void cpu_die(void)
>> > > {
>> > > - idle_task_exit();
>> > > if (ppc_md.cpu_die)
>> > > ppc_md.cpu_die();
>> > > - local_irq_disable();
>> > > - for (;;);
>> > > }
>> > > diff --git a/arch/ppc64/kernel/smp.c b/arch/ppc64/kernel/smp.c index
>> > > a9e43792f8fe..cde1947432a1 100644
>> > > --- a/arch/ppc64/kernel/smp.c
>> > > +++ b/arch/ppc64/kernel/smp.c
>> > > @@ -30,6 +30,7 @@
>> > > #include <linux/err.h>
>> > > #include <linux/sysdev.h>
>> > > #include <linux/cpu.h>
>> > > +#include <linux/notifier.h>
>> > >
>> > > #include <asm/ptrace.h>
>> > > #include <asm/atomic.h>
>> > > @@ -406,10 +407,89 @@ void __devinit smp_prepare_boot_cpu(void)
>> > > current_set[boot_cpuid] = current->thread_info; }
>> > >
>> > > +#ifdef CONFIG_HOTPLUG_CPU
>> > > +/* State of each CPU during hotplug phases */ DEFINE_PER_CPU(int,
>> > > +cpu_state) = { 0 };
>> > > +
>> > > +int generic_cpu_disable(void)
>> > > +{
>> > > + unsigned int cpu = smp_processor_id();
>> > > +
>> > > + if (cpu == boot_cpuid)
>> > > + return -EBUSY;
>> > > +
>> > > + systemcfg->processorCount--;
>> > > + cpu_clear(cpu, cpu_online_map);
>> > > + fixup_irqs(cpu_online_map);
>> > > + return 0;
>> > > +}
>> > > +
>> > > +int generic_cpu_enable(unsigned int cpu) {
>> > > + /* Do the normal bootup if we haven't
>> > > + * already bootstrapped. */
>> > > + if (system_state != SYSTEM_RUNNING)
>> > > + return -ENOSYS;
>> > > +
>> > > + /* get the target out of it's holding state */
>> > > + per_cpu(cpu_state, cpu) = CPU_UP_PREPARE;
>> > > + wmb();
>> > > +
>> > > + while (!cpu_online(cpu))
>> > > + cpu_relax();
>> > > +
>> > > + fixup_irqs(cpu_online_map);
>> > > + /* counter the irq disable in fixup_irqs */
>> > > + local_irq_enable();
>> > > + return 0;
>> > > +}
>> > > +
>> > > +void generic_cpu_die(unsigned int cpu) {
>> > > + int i;
>> > > +
>> > > + for (i = 0; i < 100; i++) {
>> > > + rmb();
>> > > + if (per_cpu(cpu_state, cpu) == CPU_DEAD)
>> > > + return;
>> > > + msleep(100);
>> > > + }
>> > > + printk(KERN_ERR "CPU%d didn't die...\n", cpu); }
>> > > +
>> > > +void generic_mach_cpu_die(void)
>> > > +{
>> > > + unsigned int cpu;
>> > > +
>> > > + local_irq_disable();
>> > > + cpu = smp_processor_id();
>> > > + printk(KERN_DEBUG "CPU%d offline\n", cpu);
>> > > + __get_cpu_var(cpu_state) = CPU_DEAD;
>> > > + wmb();
>> > > + while (__get_cpu_var(cpu_state) != CPU_UP_PREPARE)
>> > > + cpu_relax();
>> > > +
>> > > + flush_tlb_pending();
>> > > + cpu_set(cpu, cpu_online_map);
>> > > + local_irq_enable();
>> > > +}
>> > > +#endif
>> > > +
>> > > +static int __devinit cpu_enable(unsigned int cpu) {
>> > > + if (smp_ops->cpu_enable)
>> > > + return smp_ops->cpu_enable(cpu);
>> > > +
>> > > + return -ENOSYS;
>> > > +}
>> > > +
>> > > int __devinit __cpu_up(unsigned int cpu) {
>> > > int c;
>> > >
>> > > + if (!cpu_enable(cpu))
>> > > + return 0;
>> > > +
>> > > /* At boot, don't bother with non-present cpus -JSCHOPP */
>> > > if (system_state < SYSTEM_RUNNING && !cpu_present(cpu))
>> > > return -ENOENT;
>> > > diff --git a/arch/ppc64/kernel/sysfs.c b/arch/ppc64/kernel/sysfs.c
>> > > index bbc9dcda17f7..0925694c3ce5 100644
>> > > --- a/arch/ppc64/kernel/sysfs.c
>> > > +++ b/arch/ppc64/kernel/sysfs.c
>> > > @@ -18,7 +18,7 @@
>> > > #include <asm/systemcfg.h>
>> > > #include <asm/paca.h>
>> > > #include <asm/lppaca.h>
>> > > -
>> > > +#include <asm/machdep.h>
>> > >
>> > > static DEFINE_PER_CPU(struct cpu, cpu_devices);
>> > >
>> > > @@ -413,9 +413,7 @@ static int __init topology_init(void)
>> > > * CPU. For instance, the boot cpu might never be valid
>> > > * for hotplugging.
>> > > */
>> > > -#ifdef CONFIG_HOTPLUG_CPU
>> > > - if (systemcfg->platform != PLATFORM_PSERIES_LPAR)
>> > > -#endif
>> > > + if (!ppc_md.cpu_die)
>> > > c->no_control = 1;
>> > >
>> > > if (cpu_online(cpu) || (c->no_control == 0)) { diff --git
>> > > a/include/asm-ppc64/machdep.h b/include/asm-ppc64/machdep.h
>> index
>> > > 476d2185ffd1..03fe499c7604 100644
>> > > --- a/include/asm-ppc64/machdep.h
>> > > +++ b/include/asm-ppc64/machdep.h
>> > > @@ -30,6 +30,7 @@ struct smp_ops_t {
>> > > void (*setup_cpu)(int nr);
>> > > void (*take_timebase)(void);
>> > > void (*give_timebase)(void);
>> > > + int (*cpu_enable)(unsigned int nr);
>> > > int (*cpu_disable)(void);
>> > > void (*cpu_die)(unsigned int nr); }; diff --git
>> > > a/include/asm-ppc64/smp.h b/include/asm-ppc64/smp.h index
>> > > 965980bbbb57..c8646fa999c2 100644
>> > > --- a/include/asm-ppc64/smp.h
>> > > +++ b/include/asm-ppc64/smp.h
>> > > @@ -29,7 +29,7 @@
>> > > extern int boot_cpuid;
>> > > extern int boot_cpuid_phys;
>> > >
>> > > -extern void cpu_die(void) __attribute__((noreturn));
>> > > +extern void cpu_die(void);
>> > >
>> > > #ifdef CONFIG_SMP
>> > >
>> > > @@ -37,6 +37,13 @@ extern void smp_send_debugger_break(int cpu);
>> > > struct pt_regs; extern void smp_message_recv(int, struct pt_regs
>> > > *);
>> > >
>> > > +#ifdef CONFIG_HOTPLUG_CPU
>> > > +extern void fixup_irqs(cpumask_t map); int
>> > > +generic_cpu_disable(void); int generic_cpu_enable(unsigned int
>> > > +cpu); void generic_cpu_die(unsigned int cpu); void
>> > > +generic_mach_cpu_die(void); #endif
>> > >
>> > > #define __smp_processor_id() (get_paca()->paca_index) #define
>> > > hard_smp_processor_id() (get_paca()->hw_cpu_id)
>> > >
>> > > _______________________________________________
>> > > Linuxppc-dev mailing list
>> > > Linuxppc-dev@...ts.ozlabs.org
>> > > https://lists.ozlabs.org/listinfo/linuxppc-dev
>
>
>
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@...ts.ozlabs.org
> https://lists.ozlabs.org/listinfo/linuxppc-dev
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists