[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAL_JsqLiuNR_MQ+eX_TQVMDtn85hUTweNRL2Q+7Z8Tq-HJhx2g@mail.gmail.com>
Date: Tue, 29 Dec 2015 15:55:45 -0600
From: Rob Herring <robh@...nel.org>
To: Paul Kocialkowski <contact@...lk.fr>
Cc: "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Mark Rutland <mark.rutland@....com>,
Milo Kim <milo.kim@...com>,
Russell King <linux@....linux.org.uk>,
Pawel Moll <pawel.moll@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Tony Lindgren <tony@...mide.com>,
Mark Brown <broonie@...nel.org>,
Liam Girdwood <lgirdwood@...il.com>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
Benoît Cousson <bcousson@...libre.com>,
Kumar Gala <galak@...eaurora.org>,
linux-omap <linux-omap@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH 4/6] regulator: lp872x: Add enable GPIO pin support
On Tue, Dec 29, 2015 at 3:26 PM, Paul Kocialkowski <contact@...lk.fr> wrote:
> Le mardi 29 décembre 2015 à 14:02 -0600, Rob Herring a écrit :
>> On Wed, Dec 23, 2015 at 11:58:37AM +0100, Paul Kocialkowski wrote:
>> > LP872x regulators are made active via the EN pin, which might be hooked to a
>> > GPIO. This adds support for driving the GPIO high when the driver is in use.
>> >
>> > Signed-off-by: Paul Kocialkowski <contact@...lk.fr>
>> > ---
>> > .../devicetree/bindings/regulator/lp872x.txt | 1 +
>> > drivers/regulator/lp872x.c | 33 ++++++++++++++++++++--
>> > include/linux/regulator/lp872x.h | 2 ++
>> > 3 files changed, 33 insertions(+), 3 deletions(-)
>> >
>> > diff --git a/Documentation/devicetree/bindings/regulator/lp872x.txt b/Documentation/devicetree/bindings/regulator/lp872x.txt
>> > index 7818318..0559c25 100644
>> > --- a/Documentation/devicetree/bindings/regulator/lp872x.txt
>> > +++ b/Documentation/devicetree/bindings/regulator/lp872x.txt
>> > @@ -28,6 +28,7 @@ Optional properties:
>> > - ti,dvs-gpio: GPIO specifier for external DVS pin control of LP872x devices.
>> > - ti,dvs-vsel: DVS selector. 0 = SEL_V1, 1 = SEL_V2.
>> > - ti,dvs-state: initial DVS pin state. 0 = DVS_LOW, 1 = DVS_HIGH.
>> > + - ti,enable-gpio: GPIO specifier for EN pin control of LP872x devices.
>>
>> Should be "-gpios" instead of "-gpio".
>
> Care to comment why? There is only one GPIO that can be used here, since
> there is only one single EN pin. I thought this matched what is done
> already with "ti,dvs-gpio".
To be consistent. We use "clocks" and "interrupts" always whether one
or more for example.
-gpio is documented as deprecated now.
Rob
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists