lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <1451439832-13927-1-git-send-email-xuejiancheng@huawei.com>
Date:	Wed, 30 Dec 2015 09:43:46 +0800
From:	Jiancheng Xue <xuejiancheng@...wei.com>
To:	<mturquette@...libre.com>, <sboyd@...eaurora.org>,
	<robh+dt@...nel.org>, <pawel.moll@....com>, <mark.rutland@....com>,
	<ijc+devicetree@...lion.org.uk>, <galak@...eaurora.org>,
	<linux@....linux.org.uk>, <khilman@...aro.org>, <arnd@...db.de>,
	<olof@...om.net>, <xuwei5@...ilicon.com>,
	<haojian.zhuang@...aro.org>, <zhangfei.gao@...aro.org>,
	<bintian.wang@...wei.com>
CC:	<linux-kernel@...r.kernel.org>, <linux-clk@...r.kernel.org>,
	<devicetree@...r.kernel.org>,
	<linux-arm-kernel@...ts.infradead.org>, <yanhaifeng@...ilicon.com>,
	<yanghongwei@...ilicon.com>, <suwenping@...ilicon.com>,
	<ml.yang@...ilicon.com>, <gaofei@...ilicon.com>,
	<zhangzhenxing@...ilicon.com>,
	Jiancheng Xue <xuejiancheng@...wei.com>
Subject: [PATCH v4 0/6] ARM: hisi: Add initial support including clock driver for Hi3519 soc.

Hello,

Hi3519 soc is mainly used for ip camera and sport DV solutions. This patchset adds initial support
for Hi3519 soc. It includes clock driver, arch configuration, debug uart configuration and device tree.
It has been tested on hi3519 reference board.

Spi-nor flash driver and other peripheral drivers will be submitted later.

Any comments will be appreciated!

Thanks!

Change Log
----------
v4:
-Rebase to v4.4-rc7
-Divide patches according to Rob's comments
-Add spi nodes in hi3519-demb.dts

v3:
-Rebase to v4.4-rc4
-Adjust according to Arnd's comments
-Remove ARCH_HI3519, using ARCH_HISI directly

v2:
-Rebase to v4.4-rc3
-Put dt-binding doc and header file in a separate patch.
-Delete unused clocks definitions.
-Adjust the ARCH_xxx order in Kconfig file
-Rename ARCH_HI3xxx to ARCH_36xx

Jiancheng Xue (6):
  clk: hisilicon: add CRG driver for hi3519 soc
  ARM: hisi: add compatible string for Hi3519 soc
  ARM: config: hisi: enable CONFIG_RESET_CONTROLLER
  ARM: debug: add hi3519 debug uart
  mfd: dt-bindings: add device tree bindings for Hi3519 sysctrl
  ARM: dts: add dts files for Hi3519

 .../devicetree/bindings/clock/hi3519-crg.txt       |  46 ++++++
 Documentation/devicetree/bindings/mfd/hi3519.txt   |  14 ++
 arch/arm/Kconfig.debug                             |  10 ++
 arch/arm/boot/dts/Makefile                         |   2 +
 arch/arm/boot/dts/hi3519-demb.dts                  |  42 +++++
 arch/arm/boot/dts/hi3519.dtsi                      | 175 +++++++++++++++++++++
 arch/arm/configs/hisi_defconfig                    |   1 +
 arch/arm/mach-hisi/hisilicon.c                     |  23 +--
 drivers/clk/hisilicon/Kconfig                      |   7 +
 drivers/clk/hisilicon/Makefile                     |   2 +
 drivers/clk/hisilicon/clk-hi3519.c                 | 103 ++++++++++++
 drivers/clk/hisilicon/reset.c                      | 149 ++++++++++++++++++
 drivers/clk/hisilicon/reset.h                      |  32 ++++
 include/dt-bindings/clock/hi3519-clock.h           |  43 +++++
 14 files changed, 630 insertions(+), 19 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/hi3519-crg.txt
 create mode 100644 Documentation/devicetree/bindings/mfd/hi3519.txt
 create mode 100644 arch/arm/boot/dts/hi3519-demb.dts
 create mode 100644 arch/arm/boot/dts/hi3519.dtsi
 create mode 100644 drivers/clk/hisilicon/clk-hi3519.c
 create mode 100644 drivers/clk/hisilicon/reset.c
 create mode 100644 drivers/clk/hisilicon/reset.h
 create mode 100644 include/dt-bindings/clock/hi3519-clock.h

-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ