According to the SCSI-2 draft revision 10L, atari_NCR5380.c is correct when it says that the phase lines are valid up until ACK is negated following the transmission of the last byte in MESSAGE IN phase. This is true for all information transfer phases, from target to initiator. Sample the phase bits in STATUS_REG so that NCR5380_transfer_pio() can return the correct result. The return value is presently unused (perhaps because of bugs like this) but this change at least fixes the caller's phase variable, which is passed by reference. Signed-off-by: Finn Thain Reviewed-by: Hannes Reinecke Tested-by: Ondrej Zary Tested-by: Michael Schmitz --- drivers/scsi/NCR5380.c | 12 +++++++++--- drivers/scsi/atari_NCR5380.c | 11 ++++++----- 2 files changed, 15 insertions(+), 8 deletions(-) Index: linux/drivers/scsi/NCR5380.c =================================================================== --- linux.orig/drivers/scsi/NCR5380.c 2016-01-03 16:03:33.000000000 +1100 +++ linux/drivers/scsi/NCR5380.c 2016-01-03 16:03:35.000000000 +1100 @@ -1393,8 +1393,10 @@ static int NCR5380_transfer_pio(struct S NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ACK); } - /* FIXME - if this fails bus reset ?? */ - NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, 0, 5*HZ); + if (NCR5380_poll_politely(instance, + STATUS_REG, SR_REQ, 0, 5 * HZ) < 0) + break; + dprintk(NDEBUG_HANDSHAKE, "scsi%d : req false, handshake complete\n", instance->host_no); /* @@ -1421,7 +1423,11 @@ static int NCR5380_transfer_pio(struct S *count = c; *data = d; tmp = NCR5380_read(STATUS_REG); - if (tmp & SR_REQ) + /* The phase read from the bus is valid if either REQ is (already) + * asserted or if ACK hasn't been released yet. The latter applies if + * we're in MSG IN, DATA IN or STATUS and all bytes have been received. + */ + if ((tmp & SR_REQ) || ((tmp & SR_IO) && c == 0)) *phase = tmp & PHASE_MASK; else *phase = PHASE_UNKNOWN; Index: linux/drivers/scsi/atari_NCR5380.c =================================================================== --- linux.orig/drivers/scsi/atari_NCR5380.c 2016-01-03 16:03:33.000000000 +1100 +++ linux/drivers/scsi/atari_NCR5380.c 2016-01-03 16:03:35.000000000 +1100 @@ -1776,8 +1776,9 @@ static int NCR5380_transfer_pio(struct S NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ACK); } - while (NCR5380_read(STATUS_REG) & SR_REQ) - ; + if (NCR5380_poll_politely(instance, + STATUS_REG, SR_REQ, 0, 5 * HZ) < 0) + break; dprintk(NDEBUG_HANDSHAKE, "scsi%d: req false, handshake complete\n", HOSTNO); @@ -1806,10 +1807,10 @@ static int NCR5380_transfer_pio(struct S *data = d; tmp = NCR5380_read(STATUS_REG); /* The phase read from the bus is valid if either REQ is (already) - * asserted or if ACK hasn't been released yet. The latter is the case if - * we're in MSGIN and all wanted bytes have been received. + * asserted or if ACK hasn't been released yet. The latter applies if + * we're in MSG IN, DATA IN or STATUS and all bytes have been received. */ - if ((tmp & SR_REQ) || (p == PHASE_MSGIN && c == 0)) + if ((tmp & SR_REQ) || ((tmp & SR_IO) && c == 0)) *phase = tmp & PHASE_MASK; else *phase = PHASE_UNKNOWN; -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/