linux-kernel - [PATCH 2/3] USB: mxu11x0: clean device control commands

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1451831161-26792-3-git-send-email-m.othacehe@gmail.com>
Date:	Sun,  3 Jan 2016 15:26:00 +0100
From:	Mathieu OTHACEHE <m.othacehe@...il.com>
To:	johan@...nel.org, gregkh@...uxfoundation.org
Cc:	linux-kernel@...r.kernel.org, linux-usb@...r.kernel.org,
	Mathieu OTHACEHE <m.othacehe@...il.com>
Subject: [PATCH 2/3] USB: mxu11x0: clean device control commands

Sending OPEN and START commands twice is not necessary for this driver.
Also send STOP command at close.

Signed-off-by: Mathieu OTHACEHE <m.othacehe@...il.com>
---
 drivers/usb/serial/mxu11x0.c | 31 +++++++------------------------
 1 file changed, 7 insertions(+), 24 deletions(-)

diff --git a/drivers/usb/serial/mxu11x0.c b/drivers/usb/serial/mxu11x0.c
index 0fe7eab..354fcb5 100644
--- a/drivers/usb/serial/mxu11x0.c
+++ b/drivers/usb/serial/mxu11x0.c
@@ -823,30 +823,6 @@ static int mxu1_open(struct tty_struct *tty, struct usb_serial_port *port)
 		goto unlink_int_urb;
 	}
 
-	/*
-	 * reset the data toggle on the bulk endpoints to work around bug in
-	 * host controllers where things get out of sync some times
-	 */
-	usb_clear_halt(serial->dev, port->write_urb->pipe);
-	usb_clear_halt(serial->dev, port->read_urb->pipe);
-
-	if (tty)
-		mxu1_set_termios(tty, port, NULL);
-
-	status = mxu1_send_ctrl_urb(serial, MXU1_OPEN_PORT,
-				    open_settings, MXU1_UART1_PORT);
-	if (status) {
-		dev_err(&port->dev, "cannot send open command: %d\n", status);
-		goto unlink_int_urb;
-	}
-
-	status = mxu1_send_ctrl_urb(serial, MXU1_START_PORT,
-				    0, MXU1_UART1_PORT);
-	if (status) {
-		dev_err(&port->dev, "cannot send start command: %d\n", status);
-		goto unlink_int_urb;
-	}
-
 	status = usb_serial_generic_open(tty, port);
 	if (status)
 		goto unlink_int_urb;
@@ -866,6 +842,13 @@ static void mxu1_close(struct usb_serial_port *port)
 	usb_serial_generic_close(port);
 	usb_kill_urb(port->interrupt_in_urb);
 
+	status = mxu1_send_ctrl_urb(port->serial, MXU1_STOP_PORT,
+				    0, MXU1_UART1_PORT);
+	if (status) {
+		dev_err(&port->dev, "failed to send stop port command: %d\n",
+			status);
+	}
+
 	status = mxu1_send_ctrl_urb(port->serial, MXU1_CLOSE_PORT,
 				    0, MXU1_UART1_PORT);
 	if (status) {
-- 
2.6.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/