From: Ondrej Zary Convert compile-time C400_ register mapping to runtime mapping. This removes the weird negative register offsets and allows adding additional mappings. While at it, convert read/write loops into insb/outsb. Signed-off-by: Ondrej Zary Signed-off-by: Finn Thain Reviewed-by: Hannes Reinecke --- drivers/scsi/NCR5380.h | 13 ------ drivers/scsi/g_NCR5380.c | 88 +++++++++++++++++++++-------------------------- drivers/scsi/g_NCR5380.h | 12 ++++-- 3 files changed, 49 insertions(+), 64 deletions(-) Index: linux/drivers/scsi/NCR5380.h =================================================================== --- linux.orig/drivers/scsi/NCR5380.h 2016-01-03 16:04:30.000000000 +1100 +++ linux/drivers/scsi/NCR5380.h 2016-01-03 16:04:51.000000000 +1100 @@ -163,8 +163,7 @@ /* Write any value to this register to start an ini mode DMA receive */ #define START_DMA_INITIATOR_RECEIVE_REG 7 /* wo */ -#define C400_CONTROL_STATUS_REG NCR53C400_register_offset-8 /* rw */ - +/* NCR 53C400(A) Control Status Register bits: */ #define CSR_RESET 0x80 /* wo Resets 53c400 */ #define CSR_53C80_REG 0x80 /* ro 5380 registers busy */ #define CSR_TRANS_DIR 0x40 /* rw Data transfer direction */ @@ -181,16 +180,6 @@ #define CSR_BASE CSR_53C80_INTR #endif -/* Number of 128-byte blocks to be transferred */ -#define C400_BLOCK_COUNTER_REG NCR53C400_register_offset-7 /* rw */ - -/* Resume transfer after disconnect */ -#define C400_RESUME_TRANSFER_REG NCR53C400_register_offset-6 /* wo */ - -/* Access to host buffer stack */ -#define C400_HOST_BUFFER NCR53C400_register_offset-4 /* rw */ - - /* Note : PHASE_* macros are based on the values of the STATUS register */ #define PHASE_MASK (SR_MSG | SR_CD | SR_IO) Index: linux/drivers/scsi/g_NCR5380.c =================================================================== --- linux.orig/drivers/scsi/g_NCR5380.c 2016-01-03 16:04:50.000000000 +1100 +++ linux/drivers/scsi/g_NCR5380.c 2016-01-03 16:04:51.000000000 +1100 @@ -253,6 +253,7 @@ static int __init generic_NCR5380_detect }; int flags; struct Scsi_Host *instance; + struct NCR5380_hostdata *hostdata; #ifdef SCSI_G_NCR5380_MEM unsigned long base; void __iomem *iomem; @@ -394,6 +395,7 @@ static int __init generic_NCR5380_detect instance = scsi_register(tpnt, sizeof(struct NCR5380_hostdata)); if (instance == NULL) goto out_release; + hostdata = shost_priv(instance); #ifndef SCSI_G_NCR5380_MEM instance->io_port = overrides[current_override].NCR5380_map_name; @@ -403,18 +405,27 @@ static int __init generic_NCR5380_detect * On NCR53C400 boards, NCR5380 registers are mapped 8 past * the base address. */ - if (overrides[current_override].board == BOARD_NCR53C400) + if (overrides[current_override].board == BOARD_NCR53C400) { instance->io_port += 8; + hostdata->c400_ctl_status = 0; + hostdata->c400_blk_cnt = 1; + hostdata->c400_host_buf = 4; + } #else instance->base = overrides[current_override].NCR5380_map_name; - ((struct NCR5380_hostdata *)instance->hostdata)->iomem = iomem; + hostdata->iomem = iomem; + if (overrides[current_override].board == BOARD_NCR53C400) { + hostdata->c400_ctl_status = 0x100; + hostdata->c400_blk_cnt = 0x101; + hostdata->c400_host_buf = 0x104; + } #endif if (NCR5380_init(instance, flags)) goto out_unregister; if (overrides[current_override].board == BOARD_NCR53C400) - NCR5380_write(C400_CONTROL_STATUS_REG, CSR_BASE); + NCR5380_write(hostdata->c400_ctl_status, CSR_BASE); NCR5380_maybe_reset_bus(instance); @@ -522,31 +533,25 @@ generic_NCR5380_biosparam(struct scsi_de static inline int NCR5380_pread(struct Scsi_Host *instance, unsigned char *dst, int len) { -#ifdef SCSI_G_NCR5380_MEM struct NCR5380_hostdata *hostdata = shost_priv(instance); -#endif int blocks = len / 128; int start = 0; - int bl; - NCR5380_write(C400_CONTROL_STATUS_REG, CSR_BASE | CSR_TRANS_DIR); - NCR5380_write(C400_BLOCK_COUNTER_REG, blocks); + NCR5380_write(hostdata->c400_ctl_status, CSR_BASE | CSR_TRANS_DIR); + NCR5380_write(hostdata->c400_blk_cnt, blocks); while (1) { - if ((bl = NCR5380_read(C400_BLOCK_COUNTER_REG)) == 0) { + if (NCR5380_read(hostdata->c400_blk_cnt) == 0) break; - } - if (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_GATED_53C80_IRQ) { + if (NCR5380_read(hostdata->c400_ctl_status) & CSR_GATED_53C80_IRQ) { printk(KERN_ERR "53C400r: Got 53C80_IRQ start=%d, blocks=%d\n", start, blocks); return -1; } - while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_HOST_BUF_NOT_RDY); + while (NCR5380_read(hostdata->c400_ctl_status) & CSR_HOST_BUF_NOT_RDY) + ; /* FIXME - no timeout */ #ifndef SCSI_G_NCR5380_MEM - { - int i; - for (i = 0; i < 128; i++) - dst[start + i] = NCR5380_read(C400_HOST_BUFFER); - } + insb(instance->io_port + hostdata->c400_host_buf, + dst + start, 128); #else /* implies SCSI_G_NCR5380_MEM */ memcpy_fromio(dst + start, @@ -557,17 +562,12 @@ static inline int NCR5380_pread(struct S } if (blocks) { - while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_HOST_BUF_NOT_RDY) - { - // FIXME - no timeout - } + while (NCR5380_read(hostdata->c400_ctl_status) & CSR_HOST_BUF_NOT_RDY) + ; /* FIXME - no timeout */ #ifndef SCSI_G_NCR5380_MEM - { - int i; - for (i = 0; i < 128; i++) - dst[start + i] = NCR5380_read(C400_HOST_BUFFER); - } + insb(instance->io_port + hostdata->c400_host_buf, + dst + start, 128); #else /* implies SCSI_G_NCR5380_MEM */ memcpy_fromio(dst + start, @@ -577,7 +577,7 @@ static inline int NCR5380_pread(struct S blocks--; } - if (!(NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_GATED_53C80_IRQ)) + if (!(NCR5380_read(hostdata->c400_ctl_status) & CSR_GATED_53C80_IRQ)) printk("53C400r: no 53C80 gated irq after transfer"); #if 0 @@ -585,7 +585,7 @@ static inline int NCR5380_pread(struct S * DON'T DO THIS - THEY NEVER ARRIVE! */ printk("53C400r: Waiting for 53C80 registers\n"); - while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_53C80_REG) + while (NCR5380_read(hostdata->c400_ctl_status) & CSR_53C80_REG) ; #endif if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_END_DMA_TRANSFER)) @@ -606,32 +606,26 @@ static inline int NCR5380_pread(struct S static inline int NCR5380_pwrite(struct Scsi_Host *instance, unsigned char *src, int len) { -#ifdef SCSI_G_NCR5380_MEM struct NCR5380_hostdata *hostdata = shost_priv(instance); -#endif int blocks = len / 128; int start = 0; - int bl; int i; - NCR5380_write(C400_CONTROL_STATUS_REG, CSR_BASE); - NCR5380_write(C400_BLOCK_COUNTER_REG, blocks); + NCR5380_write(hostdata->c400_ctl_status, CSR_BASE); + NCR5380_write(hostdata->c400_blk_cnt, blocks); while (1) { - if (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_GATED_53C80_IRQ) { + if (NCR5380_read(hostdata->c400_ctl_status) & CSR_GATED_53C80_IRQ) { printk(KERN_ERR "53C400w: Got 53C80_IRQ start=%d, blocks=%d\n", start, blocks); return -1; } - if ((bl = NCR5380_read(C400_BLOCK_COUNTER_REG)) == 0) { + if (NCR5380_read(hostdata->c400_blk_cnt) == 0) break; - } - while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_HOST_BUF_NOT_RDY) + while (NCR5380_read(hostdata->c400_ctl_status) & CSR_HOST_BUF_NOT_RDY) ; // FIXME - timeout #ifndef SCSI_G_NCR5380_MEM - { - for (i = 0; i < 128; i++) - NCR5380_write(C400_HOST_BUFFER, src[start + i]); - } + outsb(instance->io_port + hostdata->c400_host_buf, + src + start, 128); #else /* implies SCSI_G_NCR5380_MEM */ memcpy_toio(hostdata->iomem + NCR53C400_host_buffer, @@ -641,14 +635,12 @@ static inline int NCR5380_pwrite(struct blocks--; } if (blocks) { - while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_HOST_BUF_NOT_RDY) + while (NCR5380_read(hostdata->c400_ctl_status) & CSR_HOST_BUF_NOT_RDY) ; // FIXME - no timeout #ifndef SCSI_G_NCR5380_MEM - { - for (i = 0; i < 128; i++) - NCR5380_write(C400_HOST_BUFFER, src[start + i]); - } + outsb(instance->io_port + hostdata->c400_host_buf, + src + start, 128); #else /* implies SCSI_G_NCR5380_MEM */ memcpy_toio(hostdata->iomem + NCR53C400_host_buffer, @@ -660,7 +652,7 @@ static inline int NCR5380_pwrite(struct #if 0 printk("53C400w: waiting for registers to be available\n"); - THEY NEVER DO ! while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_53C80_REG); + THEY NEVER DO ! while (NCR5380_read(hostdata->c400_ctl_status) & CSR_53C80_REG); printk("53C400w: Got em\n"); #endif @@ -668,7 +660,7 @@ static inline int NCR5380_pwrite(struct /* All documentation says to check for this. Maybe my hardware is too * fast. Waiting for it seems to work fine! KLL */ - while (!(i = NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_GATED_53C80_IRQ)) + while (!(i = NCR5380_read(hostdata->c400_ctl_status) & CSR_GATED_53C80_IRQ)) ; // FIXME - no timeout /* Index: linux/drivers/scsi/g_NCR5380.h =================================================================== --- linux.orig/drivers/scsi/g_NCR5380.h 2016-01-03 16:04:03.000000000 +1100 +++ linux/drivers/scsi/g_NCR5380.h 2016-01-03 16:04:51.000000000 +1100 @@ -29,7 +29,6 @@ #define NCR5380_map_type int #define NCR5380_map_name port -#define NCR53C400_register_offset 0 #ifdef CONFIG_SCSI_GENERIC_NCR53C400 #define NCR5380_region_size 16 @@ -42,7 +41,10 @@ #define NCR5380_write(reg, value) \ outb(value, instance->io_port + (reg)) -#define NCR5380_implementation_fields /* none */ +#define NCR5380_implementation_fields \ + int c400_ctl_status; \ + int c400_blk_cnt; \ + int c400_host_buf; #else /* therefore SCSI_G_NCR5380_MEM */ @@ -50,7 +52,6 @@ #define NCR5380_map_type unsigned long #define NCR5380_map_name base -#define NCR53C400_register_offset 0x108 #define NCR53C400_mem_base 0x3880 #define NCR53C400_host_buffer 0x3900 #define NCR5380_region_size 0x3a00 @@ -63,7 +64,10 @@ NCR53C400_mem_base + (reg)) #define NCR5380_implementation_fields \ - void __iomem *iomem; + void __iomem *iomem; \ + int c400_ctl_status; \ + int c400_blk_cnt; \ + int c400_host_buf; #endif -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/