lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1452001158-20585-2-git-send-email-narmstrong@baylibre.com>
Date:	Tue,  5 Jan 2016 14:39:16 +0100
From:	Neil Armstrong <narmstrong@...libre.com>
To:	nicolas.ferre@...el.com, davem@...emloft.net,
	harini.katakam@...inx.com, boris.brezillon@...e-electrons.com,
	alexandre.belloni@...e-electrons.com, linux-kernel@...r.kernel.org,
	netdev@...r.kernel.org, joshc@...com, devicetree@...r.kernel.org
Cc:	Neil Armstrong <narmstrong@...libre.com>
Subject: [PATCH v5 net-next 1/3] net: ethernet: cadence-macb: Add disabled usrio caps

On some platforms, the macb integration does not use the USRIO
register to configure the (R)MII port and clocks.
When the register is not implemented and the MACB error signal
is connected to the bus error, reading or writing to the USRIO
register can trigger some Imprecise External Aborts on ARM platforms.

Signed-off-by: Neil Armstrong <narmstrong@...libre.com>
---
 drivers/net/ethernet/cadence/macb.c | 27 +++++++++++++++------------
 drivers/net/ethernet/cadence/macb.h |  1 +
 2 files changed, 16 insertions(+), 12 deletions(-)

diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c
index 8b45bc9..fa53bc3 100644
--- a/drivers/net/ethernet/cadence/macb.c
+++ b/drivers/net/ethernet/cadence/macb.c
@@ -2124,7 +2124,8 @@ static void macb_get_regs(struct net_device *dev, struct ethtool_regs *regs,
 	regs_buff[10] = macb_tx_dma(&bp->queues[0], tail);
 	regs_buff[11] = macb_tx_dma(&bp->queues[0], head);
 
-	regs_buff[12] = macb_or_gem_readl(bp, USRIO);
+	if (!(bp->caps & MACB_CAPS_USRIO_DISABLED))
+		regs_buff[12] = macb_or_gem_readl(bp, USRIO);
 	if (macb_is_gem(bp)) {
 		regs_buff[13] = gem_readl(bp, DMACFG);
 	}
@@ -2403,19 +2404,21 @@ static int macb_init(struct platform_device *pdev)
 		dev->hw_features &= ~NETIF_F_SG;
 	dev->features = dev->hw_features;
 
-	val = 0;
-	if (bp->phy_interface == PHY_INTERFACE_MODE_RGMII)
-		val = GEM_BIT(RGMII);
-	else if (bp->phy_interface == PHY_INTERFACE_MODE_RMII &&
-		 (bp->caps & MACB_CAPS_USRIO_DEFAULT_IS_MII))
-		val = MACB_BIT(RMII);
-	else if (!(bp->caps & MACB_CAPS_USRIO_DEFAULT_IS_MII))
-		val = MACB_BIT(MII);
+	if (!(bp->caps & MACB_CAPS_USRIO_DISABLED)) {
+		val = 0;
+		if (bp->phy_interface == PHY_INTERFACE_MODE_RGMII)
+			val = GEM_BIT(RGMII);
+		else if (bp->phy_interface == PHY_INTERFACE_MODE_RMII &&
+			 (bp->caps & MACB_CAPS_USRIO_DEFAULT_IS_MII))
+			val = MACB_BIT(RMII);
+		else if (!(bp->caps & MACB_CAPS_USRIO_DEFAULT_IS_MII))
+			val = MACB_BIT(MII);
 
-	if (bp->caps & MACB_CAPS_USRIO_HAS_CLKEN)
-		val |= MACB_BIT(CLKEN);
+		if (bp->caps & MACB_CAPS_USRIO_HAS_CLKEN)
+			val |= MACB_BIT(CLKEN);
 
-	macb_or_gem_writel(bp, USRIO, val);
+		macb_or_gem_writel(bp, USRIO, val);
+	}
 
 	/* Set MII management clock divider */
 	val = macb_mdc_clk_div(bp);
diff --git a/drivers/net/ethernet/cadence/macb.h b/drivers/net/ethernet/cadence/macb.h
index 5c03e81..0d4ecfc 100644
--- a/drivers/net/ethernet/cadence/macb.h
+++ b/drivers/net/ethernet/cadence/macb.h
@@ -400,6 +400,7 @@
 #define MACB_CAPS_USRIO_HAS_CLKEN		0x00000002
 #define MACB_CAPS_USRIO_DEFAULT_IS_MII		0x00000004
 #define MACB_CAPS_NO_GIGABIT_HALF		0x00000008
+#define MACB_CAPS_USRIO_DISABLED		0x00000010
 #define MACB_CAPS_FIFO_MODE			0x10000000
 #define MACB_CAPS_GIGABIT_MODE_AVAILABLE	0x20000000
 #define MACB_CAPS_SG_DISABLED			0x40000000
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ