[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <2787681.imkQ5NT8Qm@avalon>
Date: Wed, 06 Jan 2016 12:39:25 +0200
From: Laurent Pinchart <laurent.pinchart@...asonboard.com>
To: Javier Martinez Canillas <javier@....samsung.com>
Cc: linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
Mauro Carvalho Chehab <mchehab@....samsung.com>,
Enrico Butera <ebutera@...il.com>,
Sakari Ailus <sakari.ailus@...ux.intel.com>,
Enric Balletbo i Serra <eballetbo@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Eduard Gavin <egavinc@...il.com>,
Hans Verkuil <hans.verkuil@...co.com>,
linux-media@...r.kernel.org
Subject: Re: [PATCH 07/10] [media] tvp5150: Add device tree binding document
Hi Javier,
Thank you for the patch.
On Monday 04 January 2016 09:25:29 Javier Martinez Canillas wrote:
> Add a Device Tree binding document for the TVP5150 video decoder.
>
> Signed-off-by: Javier Martinez Canillas <javier@....samsung.com>
> ---
>
> .../devicetree/bindings/media/i2c/tvp5150.txt | 35 +++++++++++++++++++
> 1 file changed, 35 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/i2c/tvp5150.txt
>
> diff --git a/Documentation/devicetree/bindings/media/i2c/tvp5150.txt
> b/Documentation/devicetree/bindings/media/i2c/tvp5150.txt new file mode
> 100644
> index 000000000000..bf0b3f3128ce
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/tvp5150.txt
> @@ -0,0 +1,35 @@
> +* Texas Instruments TVP5150 and TVP5151 video decoders
> +
> +The TVP5150 and TVP5151 are video decoders that convert baseband NTSC and
> PAL
> +(and also SECAM in the TVP5151 case) video signals to either 8-bit 4:2:2
> YUV
> +with discrete syncs or 8-bit ITU-R BT.656 with embedded syncs output
> formats.
> +
> +Required Properties:
> +- compatible: value must be "ti,tvp5150"
> +- reg: I2C slave address
> +
> +Optional Properties:
> +- powerdown-gpios: phandle for the GPIO connected to the PDN pin, if any.
The signal is called PDN in the datasheet, so it might make sense to call this
pdn-gpios. I have no strong opinion on this, I'll let you decide what you
think is best.
Apart from that (and the indentation issue pointed out by Rob),
Reviewed-by: Laurent Pinchart <laurent.pinchart@...asonboard.com>
> +- reset-gpios: phandle for the GPIO connected to the RESETB pin, if any.
> +
> +The device node must contain one 'port' child node for its digital output
> +video port, in accordance with the video interface bindings defined in
> +Documentation/devicetree/bindings/media/video-interfaces.txt.
> +
> +Example:
> +
> +&i2c2 {
> + ...
> + tvp5150@5c {
> + compatible = "ti,tvp5150";
> + reg = <0x5c>;
> + powerdown-gpios = <&gpio4 30 GPIO_ACTIVE_LOW>;
> + reset-gpios = <&gpio6 7 GPIO_ACTIVE_LOW>;
> +
> + port {
> + tvp5150_1: endpoint {
> + remote-endpoint = <&ccdc_ep>;
> + };
> + };
> + };
> +};
--
Regards,
Laurent Pinchart
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists