Message-ID: <CANfgCY1t7Z7+bcLF73xVydXxw0oM9vi=8BbhOCURAt+Rh2zA0Q@mail.gmail.com>
Date:	Thu, 7 Jan 2016 10:10:54 +1100
From:	Ross Green <rgkernel@...il.com>
To:	Paul McKenney <paulmck@...ux.vnet.ibm.com>
Cc:	linux-kernel@...r.kernel.org, mingo@...nel.org,
	jiangshanlai@...il.com, dipankar@...ibm.com,
	akpm@...ux-foundation.org,
	Mathieu Desnoyers <mathieu.desnoyers@...icios.com>,
	josh@...htriplett.org, tglx@...utronix.de, peterz@...radead.org,
	rostedt@...dmis.org, dhowells@...hat.com,
	Eric Dumazet <edumazet@...gle.com>, dvhart@...ux.intel.com,
	Frédéric Weisbecker <fweisbec@...il.com>,
	oleg@...hat.com, pranith kumar <bobby.prani@...il.com>
Subject: Re: rcu_preempt self-detected stall on CPU from 4.4-rc4, since 3.17

Just for completeness I have attached another rcu_preempt stall
warning from a kinux-3.17.1 kernel.

So it looks like these stall warning go back that far.

It could be that the kernel instrumentation improved enough to detect
this situation around the 3.17 kernel. I can't find any earlier
records of these stall warnings before these kernels. I guess someone
must have suspected there was a potential for these stalls and hence
the detection facility.

Regards,

Ross

On Tue, Jan 5, 2016 at 1:21 AM, Ross Green <rgkernel@...il.com> wrote:
> Well with the release of 4.4-rc8 I have built and
>  started testing the kernel.
>
> With some luck I managed to get a rcu_preempt stall within a few hours
> of testing.
>
> Upon booting, I ran a small series of bench marks to make sure
> everything is running as expected. limited regression testing and then
> just left the system to idle away, with periodic monitoring from the
> network.
>
>
> please find attached two stack traces from linux-4.4-rc8 and also linux-4.4-rc7.
>
> The interesting thing with the rc7 trace is that there are multiple
> stalls that have occurred over a 6 day period.
>
> I realise Paul you have a number of changes pending for the the RCU
> code. It would be good to try and establish what is happening with
> these stalls before the impact of those changes given that timings and
> dynamics might change whats happening in the current environment.
>
> As reported earlier, i have never been able to induce these stalls
> with heavy loading of the system. The only method I can be sure of is
> to leave the system quiet and let time go by till a stall occurs.
>
> Regards,
>
> Ross
>
> On Mon, Jan 4, 2016 at 9:00 AM, Ross Green <rgkernel@...il.com> wrote:
>> Thanks Paul for your analysis and investigation,
>>
>> I understand your patches are designed not to "fix" the problem, but
>> more to move the problem ahead.
>>
>> I will include a few more stack traces from various kernels. I can go
>> back to around 3.17, with similar trace results.
>>
>> My observation is that the problem can occur at various times and with
>> out any "bad" effect other than more stalls could happen afterwards.
>>
>> At first I wondered if they might actually be a false positive as the
>> kernel seemed to carry on and run quite happily.  It is rare that I
>> find a kernel just locks up after observing such a stall, or a
>> complete kernel splat!
>>
>> Unfortunately with my testing I have never been able to induce the
>> problem under any heavy load that would immediately trigger the
>> problem. Indeed most heavy cpu utilisation seemed to just sail on
>> quite nicely.
>>
>> The time for a fault, seems so far, to be non-deterministic with
>> quiescent systems taking anywhere from a few hours through to some six
>> days before showing the problem.
>>
>> More recent kernels seem to have richer stall and back trace
>> information so I was hoping that might shed some light on how they
>> might be occurring..
>>
>> I usually only run a kernel till I get a new -rc release to test with,
>> so a run of 1 week is a typical cycle.
>>
>> I just wish I could find a sure fire method to trigger the problem!!
>>
>> I have included a few more traces of various kernels all showing the problem.
>>
>> Regards,
>>
>> Ross
>>
>> On Mon, Jan 4, 2016 at 5:15 AM, Paul E. McKenney
>> <paulmck@...ux.vnet.ibm.com> wrote:
>>> On Sun, Jan 03, 2016 at 07:27:17PM +1100, Ross Green wrote:
>>>> I would not describe the load on this test machine as high or real time.
>>>>
>>>> Apart from a number of standard daemons not much more is running at all!
>>>>
>>>> I normally build a release kernel as soon as possible and set it running.
>>>> Typically I run a series of benchmarks to confirm most things appear
>>>> to be working and then just leave it running. During a normal day i
>>>> will check on the machine 4/5 times just to see how its going!
>>>> Typically I will logon remotely via wifi network connection.
>>>>
>>>> just for your information i will include a few other stack traces from
>>>> previous kernels that may show some trend!
>>>>
>>>>
>>>> Please see the attachments.
>>>
>>> Thank you for the additional details.  This does look similar to some
>>> problems I am seeing, though only in heavy rcutorture workloads with
>>> CPU hotplugging.
>>>
>>> I have some crude workarounds in progress, see for example
>>> 2da26818e515 (rcu: Awaken grace-period kthread when stalled) at
>>> git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu.git.
>>> This workaround kicks the RCU grace-period kthread on every stall warning.
>>> In my testing, this workaround results in slow but real forward progress.
>>>
>>> I have a better workaround in progress, however, please note:
>>>
>>> 1.      I have no intention of sending these workarounds upstream.
>>>
>>> 2.      The workarounds will splat when they take effect.  In other words,
>>>         the idea is not to paper over the problem, but instead to allow
>>>         me to separate testing concerns.
>>>
>>> 3.      A fix is needed for the underlying bug, wherever it might be.
>>>
>>>                                                         Thanx, Paul
>>>
>>>> Regards,
>>>>
>>>> Ross
>>>>
>>>>
>>>>
>>>> On Sun, Jan 3, 2016 at 5:17 PM, Paul E. McKenney
>>>> <paulmck@...ux.vnet.ibm.com> wrote:
>>>> > On Sun, Jan 03, 2016 at 04:29:11PM +1100, Ross Green wrote:
>>>> >> Still seeing these rcu_preempt stalls on kernels through to 4.4-rc7
>>>> >>
>>>> >> Still have not found a sure fire method to evoke this stall, but have
>>>> >> found that it will normally occur within a week of running a kernel -
>>>> >> usually when it is quiet with light load.
>>>> >>
>>>> >> Have seen similar self detected stalls all the way back to 3.17.
>>>> >> Most recent kernels have included 4.4-rc5 4.4-rc6 and 4.4-rc7
>>>> >>
>>>> >> Regards,
>>>> >>
>>>> >> Ross
>>>> >>
>>>> >> On Fri, Dec 11, 2015 at 10:17 PM, Ross Green <rgkernel@...il.com> wrote:
>>>> >> > I have been getting these stalls in kernels going back to 3.17.
>>>> >> >
>>>> >> > This stall occurs usually under light load but often requires several
>>>> >> > days to show itself. I have not found any simple way to trigger the
>>>> >> > stall. Indeed heavy workloads seems not to show the fault.
>>>> >> >
>>>> >> > Anyone have any thoughts here?
>>>> >> >
>>>> >> > The recent patch by peterz with kernel/sched/wait.c I thought might
>>>> >> > help the situation, but alas after a few days of running 4.4-rc4 the
>>>> >> > following turned up.
>>>> >> >
>>>> >> > [179922.003570] INFO: rcu_preempt self-detected stall on CPU
>>>> >> > [179922.008178] INFO: rcu_preempt detected stalls on CPUs/tasks:
>>>> >> > [179922.008178]         0-...: (1 ticks this GP) idle=a91/1/0
>>>> >
>>>> > CPU 0 is non-idle from an RCU perspective.
>>>> >
>>>> >> > softirq=1296733/1296733 fqs=0
>>>> >> > [179922.008178]
>>>> >> > [179922.008209] (detected by 1, t=8775 jiffies, g=576439, c=576438, q=102)
>>>> >> > [179922.008209] Task dump for CPU 0:
>>>> >> > [179922.008209] swapper/0       R [179922.008209]  running [179922.008209]     0     0      0 0x00000000
>>>> >> > [179922.008209] Backtrace:
>>>> >> >
>>>> >> > [179922.008239] Backtrace aborted due to bad frame pointer <c0907f54>
>>>> >
>>>> > Can't have everything, I guess...
>>>> >
>>>> >> > [179922.008239] rcu_preempt kthread starved for 8775 jiffies! g576439 c576438 f0x0 s3 ->state=0x1
>>>> >
>>>> > Something is keeping the rcu_preempt grace-period kthread from
>>>> > running.  This far into the grace period, it should have a
>>>> > timer event waking it every few jiffies.  It is currently
>>>> > in TASK_INTERRUPTIBLE state.
>>>> >
>>>> >> > [179922.060302]         0-...: (1 ticks this GP) idle=a91/1/0 softirq=1296733/1296733 fqs=0
>>>> >> > [179922.068023]          (t=8775 jiffies g=576439 c=576438 q=102)
>>>> >> > [179922.073913] rcu_preempt kthread starved for 8775 jiffies! g576439 c576438 f0x2 s3 ->state=0x100
>>>> >
>>>> > Same story, same grace period, pretty much same time.  Now there is an FQS
>>>> > request (f0x2) and the state is now TASK_WAKING (->state=0x100 == 256).
>>>> >
>>>> >> > [179922.083587] Task dump for CPU 0:
>>>> >> > [179922.087097] swapper/0       R running      0     0      0 0x00000000
>>>> >> > [179922.093292] Backtrace:
>>>> >> > [179922.096313] [<c0013ea8>] (dump_backtrace) from [<c00140a4>] (show_stack+0x18/0x1c)
>>>> >> > [179922.104675]  r7:c0908514 r6:80080193 r5:00000000 r4:c090aca8
>>>> >> > [179922.110809] [<c001408c>] (show_stack) from [<c005a858>] (sched_show_task+0xbc/0x110)
>>>> >> > [179922.119049] [<c005a79c>] (sched_show_task) from [<c005ccd4>] (dump_cpu_task+0x40/0x44)
>>>> >> > [179922.127624]  r5:c0917680 r4:00000000
>>>> >> > [179922.131042] [<c005cc94>] (dump_cpu_task) from [<c0082268>] (rcu_dump_cpu_stacks+0x9c/0xdc)
>>>> >> > [179922.140350]  r5:c0917680 r4:00000001
>>>> >> > [179922.143157] [<c00821cc>] (rcu_dump_cpu_stacks) from [<c008637c>] (rcu_check_callbacks+0x504/0x8e4)
>>>> >> > [179922.153808]  r9:c0908514 r8:c0917680 r7:00000066 r6:2eeab000
>>>> >> > r5:c0904300 r4:ef7af300
>>>> >> > [179922.161499] [<c0085e78>] (rcu_check_callbacks) from [<c00895d0>] (update_process_times+0x40/0x6c)
>>>> >> > [179922.170898]  r10:c009a584 r9:00000001 r8:ef7abc4c r7:0000a3a3
>>>> >> > r6:4ec3391c r5:00000000
>>>> >> > [179922.179901]  r4:c090aca8
>>>> >> > [179922.182708] [<c0089590>] (update_process_times) from [<c009a580>]
>>>> >> > (tick_sched_handle+0x50/0x54)
>>>> >> > [179922.192108]  r5:c0907f10 r4:ef7abe40
>>>> >> > [179922.195983] [<c009a530>] (tick_sched_handle) from [<c009a5d4>]
>>>> >> > (tick_sched_timer+0x50/0x94)
>>>> >> > [179922.204895] [<c009a584>] (tick_sched_timer) from [<c0089fe4>]
>>>> >> > (__hrtimer_run_queues+0x110/0x1a0)
>>>> >> > [179922.214324]  r7:00000000 r6:ef7abc40 r5:ef7abe40 r4:ef7abc00
>>>> >> > [179922.220428] [<c0089ed4>] (__hrtimer_run_queues) from [<c008a674>]
>>>> >> > (hrtimer_interrupt+0xac/0x1f8)
>>>> >> > [179922.227111]  r10:ef7abc78 r9:ef7abc98 r8:ef7abc14 r7:ef7abcb8
>>>> >> > r6:ffffffff r5:00000003
>>>> >> > [179922.238220]  r4:ef7abc00
>>>> >> > [179922.238220] [<c008a5c8>] (hrtimer_interrupt) from [<c00170ec>]
>>>> >> > (twd_handler+0x38/0x48)
>>>> >> > [179922.238220]  r10:c09084e8 r9:fa241100 r8:00000011 r7:ef028780
>>>> >> > r6:c092574c r5:ef005cc0
>>>> >
>>>> > All interrupt stack up to this point.
>>>> >
>>>> > It is quite possible that the stuff below here is at fault as well.
>>>> > That said, the grace-period should actually get to execute at some
>>>> > point.  Do you have a heavy real-time load that might be starving
>>>> > things?
>>>> >
>>>> >                                                         Thanx, Paul
>>>> >
>>>> >> > [179922.257110]  r4:00000001
>>>> >> > [179922.257110] [<c00170b4>] (twd_handler) from [<c007c8f8>] (handle_percpu_devid_irq+0x74/0x8c)
>>>> >> > [179922.269683]  r5:ef005cc0 r4:ef7b1740
>>>> >> > [179922.269683] [<c007c884>] (handle_percpu_devid_irq) from [<c0078454>] (generic_handle_irq+0x2c/0x3c)
>>>> >> > [179922.283233]  r9:fa241100 r8:ef008000 r7:00000001 r6:00000000
>>>> >> > r5:00000000 r4:c09013e8
>>>> >> > [179922.290985] [<c0078428>] (generic_handle_irq) from [<c007872c>] (__handle_domain_irq+0x64/0xbc)
>>>> >> > [179922.300842] [<c00786c8>] (__handle_domain_irq) from [<c00094c0>]
>>>> >> > (gic_handle_irq+0x50/0x90)
>>>> >> > [179922.303222]  r9:fa241100 r8:fa240100 r7:c0907f10 r6:fa24010c
>>>> >> > r5:c09087a8 r4:c0925748
>>>> >> > [179922.315216] [<c0009470>] (gic_handle_irq) from [<c0014bd4>]
>>>> >> > (__irq_svc+0x54/0x90)
>>>> >> > [179922.319000] Exception stack(0xc0907f10 to 0xc0907f58)
>>>> >> > [179922.331542] 7f00:                                     00000000
>>>> >> > ef7ab390 fe600000 00000000
>>>> >> > [179922.331542] 7f20: c0906000 c090849c c0900364 c06a8124 c0907f80
>>>> >> > c0944563 c09084e8 c0907f6c
>>>> >> > [179922.349029] 7f40: c0907f4c c0907f60 c00287ac c0010ba8 60080113 ffffffff
>>>> >> > [179922.349029]  r9:c0944563 r8:c0907f80 r7:c0907f44 r6:ffffffff
>>>> >> > r5:60080113 r4:c0010ba8
>>>> >> > [179922.357116] [<c0010b80>] (arch_cpu_idle) from [<c006f034>]
>>>> >> > (default_idle_call+0x28/0x34)
>>>> >> > [179922.368926] [<c006f00c>] (default_idle_call) from [<c006f154>]
>>>> >> > (cpu_startup_entry+0x114/0x18c)
>>>> >> > [179922.368926] [<c006f040>] (cpu_startup_entry) from [<c069fc6c>]
>>>> >> > (rest_init+0x90/0x94)
>>>> >> > [179922.385284]  r7:ffffffff r4:00000002
>>>> >> > [179922.393463] [<c069fbdc>] (rest_init) from [<c08bbcec>]
>>>> >> > (start_kernel+0x370/0x37c)
>>>> >> > [179922.400421]  r5:c0947000 r4:00000000
>>>> >> > [179922.400421] [<c08bb97c>] (start_kernel) from [<8000807c>] (0x8000807c)
>>>> >> > $
>>>> >
>>>> >
>>>
>>>
>>>

Download attachment "dmesg-3.17.1" of type "application/octet-stream" (26680 bytes)

Powered by blists - more mailing lists