[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <568E327D.8040905@imgtec.com>
Date: Thu, 7 Jan 2016 09:40:13 +0000
From: Harvey Hunt <harvey.hunt@...tec.com>
To: Brian Norris <computersforpeace@...il.com>
CC: <linux-mtd@...ts.infradead.org>,
<boris.brezillon@...e-electrons.com>, <alex@...x-smith.me.uk>,
Alex Smith <alex.smith@...tec.com>,
"Zubair Lutfullah Kakakhel" <Zubair.Kakakhel@...tec.com>,
David Woodhouse <dwmw2@...radead.org>,
Paul Burton <paul.burton@...tec.com>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-mips@...ux-mips.org>, <robh@...nel.org>
Subject: Re: [PATCH v11 3/3] MIPS: dts: jz4780/ci20: Add NEMC, BCH and NAND
device tree nodes
Hi Brian,
On 07/01/16 01:29, Brian Norris wrote:
> On Mon, Jan 04, 2016 at 12:34:44PM +0000, Harvey Hunt wrote:
>> diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts
>> index 9fcb9e7..782258c 100644
>> --- a/arch/mips/boot/dts/ingenic/ci20.dts
>> +++ b/arch/mips/boot/dts/ingenic/ci20.dts
>
> As I noted on patch 1, you need to send this to linux-mips + Ralf.
I forgot to CC Ralf on this version, but he took v9 (no change between
v9 and v11) through linux-mips as can be seen here:
http://patchwork.linux-mips.org/patch/11695/
>
>> @@ -42,3 +42,66 @@
>> &uart4 {
>> status = "okay";
>> };
>> +
>> +&nemc {
>> + status = "okay";
>> +
>> + nandc: nand-controller@1 {
>> + compatible = "ingenic,jz4780-nand";
>> + reg = <1 0 0x1000000>;
>> +
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + ingenic,bch-controller = <&bch>;
>> +
>> + ingenic,nemc-tAS = <10>;
>> + ingenic,nemc-tAH = <5>;
>> + ingenic,nemc-tBP = <10>;
>> + ingenic,nemc-tAW = <15>;
>> + ingenic,nemc-tSTRV = <100>;
>> +
>> + nand@1 {
>> + reg = <1>;
>> +
>> + nand-ecc-step-size = <1024>;
>> + nand-ecc-strength = <24>;
>> + nand-ecc-mode = "hw";
>> + nand-on-flash-bbt;
>> +
>> + partitions {
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>
> This binding was updated, so you need:
>
> compatible = "fixed-partitions";
This has been fixed in mips-linux here:
http://patchwork.linux-mips.org/patch/11914/
Thanks,
Harvey
>
> Brian
>
>> +
>> + partition@0 {
>> + label = "u-boot-spl";
>> + reg = <0x0 0x0 0x0 0x800000>;
>> + };
>> +
>> + partition@...00000 {
>> + label = "u-boot";
>> + reg = <0x0 0x800000 0x0 0x200000>;
>> + };
>> +
>> + partition@...00000 {
>> + label = "u-boot-env";
>> + reg = <0x0 0xa00000 0x0 0x200000>;
>> + };
>> +
>> + partition@...00000 {
>> + label = "boot";
>> + reg = <0x0 0xc00000 0x0 0x4000000>;
>> + };
>> +
>> + partition@...c00000 {
>> + label = "system";
>> + reg = <0x0 0x4c00000 0x1 0xfb400000>;
>> + };
>> + };
>> + };
>> + };
>> +};
>> +
>> +&bch {
>> + status = "okay";
>> +};
>
> Brian
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists