| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1452177524-23192-7-git-send-email-ldewangan@nvidia.com>
Date: Thu, 7 Jan 2016 20:08:44 +0530
From: Laxman Dewangan <ldewangan@...dia.com>
To: <robh+dt@...nel.org>, <pawel.moll@....com>, <mark.rutland@....com>,
<ijc+devicetree@...lion.org.uk>, <galak@...eaurora.org>,
<linus.walleij@...aro.org>, <gnurou@...il.com>,
<lee.jones@...aro.org>, <broonie@...nel.org>,
<a.zummo@...ertech.it>, <alexandre.belloni@...e-electrons.com>
CC: <lgirdwood@...il.com>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <linux-gpio@...r.kernel.org>,
<rtc-linux@...glegroups.com>, <swarren@...dia.com>,
<treding@...dia.com>, Laxman Dewangan <ldewangan@...dia.com>,
Mallikarjun Kasoju <mkasoju@...dia.com>
Subject: [PATCH 6/6] regulator: max77620: add regulator driver for max77620/max20024
MAXIM Semiconductor's PMIC, MAX77620 and MAX20024 have the
multiple DCDC and LDOs. This supplies the power to different
components of the system.
Also these rails has configuration for ramp time, flexible
power sequence, slew rate etc.
Add regulator driver to access these rails via regulator APIs.
Signed-off-by: Laxman Dewangan <ldewangan@...dia.com>
Signed-off-by: Mallikarjun Kasoju <mkasoju@...dia.com>
Tested-by: Venkat Reddy Talla <vreddytalla@...dia.com>
---
drivers/regulator/Kconfig | 9 +
drivers/regulator/Makefile | 1 +
drivers/regulator/max77620-regulator.c | 1062 ++++++++++++++++++++++++++++++++
3 files changed, 1072 insertions(+)
create mode 100644 drivers/regulator/max77620-regulator.c
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 8155e80..b92214b 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -343,6 +343,15 @@ config REGULATOR_MAX1586
regulator via I2C bus. The provided regulator is suitable
for PXA27x chips to control VCC_CORE and VCC_USIM voltages.
+config REGULATOR_MAX77620
+ tristate "Maxim 77620/MAX20024 voltage regulator"
+ depends on MFD_MAX77620
+ help
+ This driver controls Maxim MAX77620 voltage output regulator
+ via I2C bus. The provided regulator is suitable for Tegra
+ chip to control Step-Down DC-DC and LDOs. Say Y here to
+ enable the regulator driver.
+
config REGULATOR_MAX8649
tristate "Maxim 8649 voltage regulator"
depends on I2C
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 980b194..2564c00 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -46,6 +46,7 @@ obj-$(CONFIG_REGULATOR_LP8755) += lp8755.o
obj-$(CONFIG_REGULATOR_LTC3589) += ltc3589.o
obj-$(CONFIG_REGULATOR_MAX14577) += max14577.o
obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o
+obj-$(CONFIG_REGULATOR_MAX77620) += max77620-regulator.o
obj-$(CONFIG_REGULATOR_MAX8649) += max8649.o
obj-$(CONFIG_REGULATOR_MAX8660) += max8660.o
obj-$(CONFIG_REGULATOR_MAX8907) += max8907-regulator.o
diff --git a/drivers/regulator/max77620-regulator.c b/drivers/regulator/max77620-regulator.c
new file mode 100644
index 0000000..c1b18b9
--- /dev/null
+++ b/drivers/regulator/max77620-regulator.c
@@ -0,0 +1,1062 @@
+/*
+ * Maxim MAX77620 Regulator driver
+ *
+ * Copyright (c) 2016, NVIDIA CORPORATION. All rights reserved.
+ *
+ * Author: Mallikarjun Kasoju <mkasoju@...dia.com>
+ * Laxman Dewangan <ldewangan@...dia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/max77620.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/of.h>
+#include <linux/regulator/of_regulator.h>
+
+#define max77620_rails(_name) "max77620-"#_name
+
+/* Power Mode */
+#define MAX77620_POWER_MODE_NORMAL 3
+#define MAX77620_POWER_MODE_LPM 2
+#define MAX77620_POWER_MODE_GLPM 1
+#define MAX77620_POWER_MODE_DISABLE 0
+
+/* SD Slew Rate */
+#define MAX77620_SD_SR_13_75 0
+#define MAX77620_SD_SR_27_5 1
+#define MAX77620_SD_SR_55 2
+#define MAX77620_SD_SR_100 3
+
+#define MAX77620_FPS_SRC_NUM 3
+
+struct max77620_regulator_info {
+ u8 type;
+ u32 min_uV;
+ u32 max_uV;
+ u32 step_uV;
+ u8 fps_addr;
+ u8 volt_addr;
+ u8 cfg_addr;
+ u8 volt_mask;
+ u8 power_mode_mask;
+ u8 power_mode_shift;
+ u8 remote_sense_addr;
+ u8 remote_sense_mask;
+ struct regulator_desc desc;
+};
+
+struct max77620_regulator_pdata {
+ bool glpm_enable;
+ bool en2_ctrl_sd0;
+ bool sd_fsrade_disable;
+ bool disable_remote_sense_on_suspend;
+ struct regulator_init_data *reg_idata;
+ int active_fps_src;
+ int active_fps_pd_slot;
+ int active_fps_pu_slot;
+ int suspend_fps_src;
+ int suspend_fps_pd_slot;
+ int suspend_fps_pu_slot;
+ int sleep_mode;
+ int current_mode;
+ int normal_mode;
+};
+
+struct max77620_regulator {
+ struct device *dev;
+ struct max77620_chip *max77620_chip;
+ struct max77620_regulator_info *rinfo[MAX77620_NUM_REGS];
+ struct max77620_regulator_pdata reg_pdata[MAX77620_NUM_REGS];
+ struct regulator_dev *rdev[MAX77620_NUM_REGS];
+ int enable_power_mode[MAX77620_NUM_REGS];
+ int current_power_mode[MAX77620_NUM_REGS];
+ int active_fps_src[MAX77620_NUM_REGS];
+};
+
+#define fps_src_name(fps_src) \
+ (fps_src == FPS_SRC_0 ? "FPS_SRC_0" : \
+ fps_src == FPS_SRC_1 ? "FPS_SRC_1" : \
+ fps_src == FPS_SRC_2 ? "FPS_SRC_2" : "FPS_SRC_NONE")
+
+static int max77620_regulator_get_fps_src(struct max77620_regulator *reg,
+ int id)
+{
+ struct max77620_regulator_info *rinfo = reg->rinfo[id];
+ struct device *parent = reg->max77620_chip->dev;
+ u8 val;
+ int ret;
+
+ ret = max77620_reg_read(parent, MAX77620_PWR_SLAVE,
+ rinfo->fps_addr, &val);
+ if (ret < 0) {
+ dev_err(reg->dev, "Reg 0x%02x read failed %d\n",
+ rinfo->fps_addr, ret);
+ return ret;
+ }
+ ret = (val & MAX77620_FPS_SRC_MASK) >> MAX77620_FPS_SRC_SHIFT;
+ return ret;
+}
+
+static int max77620_regulator_set_fps_src(struct max77620_regulator *reg,
+ int fps_src, int id)
+{
+ struct max77620_regulator_info *rinfo = reg->rinfo[id];
+ struct device *parent = reg->max77620_chip->dev;
+ u8 val;
+ int ret;
+
+ switch (fps_src) {
+ case FPS_SRC_0:
+ case FPS_SRC_1:
+ case FPS_SRC_2:
+ case FPS_SRC_NONE:
+ break;
+
+ case FPS_SRC_DEF:
+ ret = max77620_reg_read(parent, MAX77620_PWR_SLAVE,
+ rinfo->fps_addr, &val);
+ if (ret < 0) {
+ dev_err(reg->dev, "Reg 0x%02x read failed %d\n",
+ rinfo->fps_addr, ret);
+ return ret;
+ }
+ ret = (val & MAX77620_FPS_SRC_MASK) >> MAX77620_FPS_SRC_SHIFT;
+ reg->active_fps_src[id] = ret;
+ return 0;
+
+ default:
+ dev_err(reg->dev, "Invalid FPS %d for regulator %d\n",
+ fps_src, id);
+ return -EINVAL;
+ }
+ ret = max77620_reg_update(parent, MAX77620_PWR_SLAVE,
+ rinfo->fps_addr, MAX77620_FPS_SRC_MASK,
+ fps_src << MAX77620_FPS_SRC_SHIFT);
+ if (ret < 0) {
+ dev_err(reg->dev, "Reg 0x%02x update failed %d\n",
+ rinfo->fps_addr, ret);
+ return ret;
+ }
+ reg->active_fps_src[id] = fps_src;
+ return 0;
+}
+
+static int max77620_regulator_set_fps_slots(struct max77620_regulator *reg,
+ int id, bool is_suspend)
+{
+ struct max77620_regulator_pdata *rpdata = ®->reg_pdata[id];
+ struct max77620_regulator_info *rinfo = reg->rinfo[id];
+ struct device *parent = reg->max77620_chip->dev;
+ unsigned int val = 0;
+ unsigned int mask = 0;
+ int pu = rpdata->active_fps_pu_slot;
+ int pd = rpdata->active_fps_pd_slot;
+ int ret = 0;
+
+ if (is_suspend) {
+ pu = rpdata->suspend_fps_pu_slot;
+ pd = rpdata->suspend_fps_pd_slot;
+ }
+
+ /* FPS power up period setting */
+ if (pu >= 0) {
+ val |= (pu << MAX77620_FPS_PU_PERIOD_SHIFT);
+ mask |= MAX77620_FPS_PU_PERIOD_MASK;
+ }
+
+ /* FPS power down period setting */
+ if (pd >= 0) {
+ val |= (pd << MAX77620_FPS_PD_PERIOD_SHIFT);
+ mask |= MAX77620_FPS_PD_PERIOD_MASK;
+ }
+
+ if (mask) {
+ ret = max77620_reg_update(parent, MAX77620_PWR_SLAVE,
+ rinfo->fps_addr, mask, val);
+ if (ret < 0) {
+ dev_err(reg->dev, "Reg 0x%02x update failed, %d\n",
+ rinfo->fps_addr, ret);
+ return ret;
+ }
+ }
+ return ret;
+}
+
+static int max77620_regulator_set_power_mode(struct max77620_regulator *reg,
+ int power_mode, int id)
+{
+ struct max77620_regulator_info *rinfo = reg->rinfo[id];
+ int ret;
+ struct device *parent = reg->max77620_chip->dev;
+ u8 mask = rinfo->power_mode_mask;
+ u8 shift = rinfo->power_mode_shift;
+ u8 addr = rinfo->volt_addr;
+
+ if (rinfo->type == MAX77620_REGULATOR_TYPE_SD)
+ addr = rinfo->cfg_addr;
+
+ ret = max77620_reg_update(parent, MAX77620_PWR_SLAVE,
+ addr, mask, power_mode << shift);
+ if (ret < 0) {
+ dev_err(reg->dev, "Regulator mode set failed. ret %d\n", ret);
+ return ret;
+ }
+ reg->current_power_mode[id] = power_mode;
+ return ret;
+}
+
+static int max77620_regulator_get_power_mode(struct max77620_regulator *reg,
+ int id)
+{
+ struct max77620_regulator_info *rinfo = reg->rinfo[id];
+ struct device *parent = reg->max77620_chip->dev;
+ u8 val;
+ u8 mask = rinfo->power_mode_mask;
+ u8 shift = rinfo->power_mode_shift;
+ u8 addr = rinfo->volt_addr;
+ int ret;
+
+ if (rinfo->type == MAX77620_REGULATOR_TYPE_SD)
+ addr = rinfo->cfg_addr;
+
+ ret = max77620_reg_read(parent, MAX77620_PWR_SLAVE, addr, &val);
+ if (ret < 0) {
+ dev_err(reg->dev, "Reg 0x%02x read failed %d\n",
+ addr, ret);
+ return ret;
+ }
+
+ return (val & mask) >> shift;
+}
+
+static int max77620_regulator_enable(struct regulator_dev *rdev)
+{
+ struct max77620_regulator *reg = rdev_get_drvdata(rdev);
+ int id = rdev_get_id(rdev);
+ struct max77620_regulator_pdata *rpdata = ®->reg_pdata[id];
+ int ret;
+
+ if (reg->active_fps_src[id] != FPS_SRC_NONE)
+ return 0;
+
+ if ((id == MAX77620_REGULATOR_ID_SD0) && rpdata->en2_ctrl_sd0)
+ return 0;
+
+ ret = max77620_regulator_set_power_mode(reg, reg->enable_power_mode[id],
+ id);
+ if (ret < 0) {
+ dev_err(reg->dev, "Regulator %d power mode config failed: %d\n",
+ id, ret);
+ return ret;
+ }
+ return 0;
+}
+
+static int max77620_regulator_disable(struct regulator_dev *rdev)
+{
+ struct max77620_regulator *reg = rdev_get_drvdata(rdev);
+ int id = rdev_get_id(rdev);
+ struct max77620_regulator_pdata *rpdata = ®->reg_pdata[id];
+ int ret;
+
+ if (reg->active_fps_src[id] != FPS_SRC_NONE)
+ return 0;
+
+ if ((id == MAX77620_REGULATOR_ID_SD0) && rpdata->en2_ctrl_sd0)
+ return 0;
+
+ ret = max77620_regulator_set_power_mode(reg,
+ MAX77620_POWER_MODE_DISABLE, id);
+ if (ret < 0) {
+ dev_err(reg->dev, "Regulator %d power mode config failed: %d\n",
+ id, ret);
+ return ret;
+ }
+ return 0;
+}
+
+static int max77620_regulator_is_enabled(struct regulator_dev *rdev)
+{
+ struct max77620_regulator *reg = rdev_get_drvdata(rdev);
+ int id = rdev_get_id(rdev);
+ struct max77620_regulator_pdata *rpdata = ®->reg_pdata[id];
+ int ret = 1;
+
+ if (reg->active_fps_src[id] != FPS_SRC_NONE)
+ return 1;
+
+ if ((id == MAX77620_REGULATOR_ID_SD0) && rpdata->en2_ctrl_sd0)
+ return 1;
+
+ ret = max77620_regulator_get_power_mode(reg, id);
+ if (ret < 0) {
+ dev_err(reg->dev, "Regulator %d power mode read failed: %d\n",
+ id, ret);
+ return ret;
+ }
+ if (ret != MAX77620_POWER_MODE_DISABLE)
+ return 1;
+
+ return 0;
+}
+
+static int max77620_regulator_set_mode(struct regulator_dev *rdev,
+ unsigned int mode)
+{
+ struct max77620_regulator *reg = rdev_get_drvdata(rdev);
+ int id = rdev_get_id(rdev);
+ struct max77620_regulator_info *rinfo = reg->rinfo[id];
+ struct max77620_regulator_pdata *rpdata = ®->reg_pdata[id];
+ struct device *parent = reg->max77620_chip->dev;
+ int power_mode;
+ int ret;
+ bool fpwm = false;
+
+ switch (mode) {
+ case REGULATOR_MODE_FAST:
+ fpwm = true;
+ power_mode = MAX77620_POWER_MODE_NORMAL;
+ break;
+
+ case REGULATOR_MODE_NORMAL:
+ power_mode = MAX77620_POWER_MODE_NORMAL;
+ break;
+
+ case REGULATOR_MODE_IDLE:
+ case REGULATOR_MODE_STANDBY:
+ if (rpdata->glpm_enable)
+ power_mode = MAX77620_POWER_MODE_GLPM;
+ else
+ power_mode = MAX77620_POWER_MODE_LPM;
+ break;
+
+ default:
+ dev_err(reg->dev, "The regulator id %d mode %d not supported\n",
+ id, mode);
+ return -EINVAL;
+ }
+
+ if (rinfo->type != MAX77620_REGULATOR_TYPE_SD)
+ goto skip_fpwm;
+
+ if (fpwm)
+ ret = max77620_reg_update(parent, MAX77620_PWR_SLAVE,
+ rinfo->cfg_addr, MAX77620_SD_FPWM_MASK,
+ MAX77620_SD_FPWM_MASK);
+ else
+ ret = max77620_reg_update(parent, MAX77620_PWR_SLAVE,
+ rinfo->cfg_addr, MAX77620_SD_FPWM_MASK, 0);
+ if (ret < 0) {
+ dev_err(reg->dev, "Reg 0x%02x update failed: %d\n",
+ rinfo->cfg_addr, ret);
+ return ret;
+ }
+ rpdata->current_mode = mode;
+
+skip_fpwm:
+ ret = max77620_regulator_set_power_mode(reg, power_mode, id);
+ if (ret < 0) {
+ dev_err(reg->dev, "Power mode of regualtor %d failed %d\n",
+ id, ret);
+ return ret;
+ }
+ reg->enable_power_mode[id] = power_mode;
+ return 0;
+}
+
+static unsigned int max77620_regulator_get_mode(struct regulator_dev *rdev)
+{
+ struct max77620_regulator *reg = rdev_get_drvdata(rdev);
+ struct device *parent = reg->max77620_chip->dev;
+ int id = rdev_get_id(rdev);
+ struct max77620_regulator_info *rinfo = reg->rinfo[id];
+ int fpwm = 0;
+ int ret;
+ int pm_mode, reg_mode;
+ u8 val;
+
+ ret = max77620_regulator_get_power_mode(reg, id);
+ if (ret < 0)
+ return 0;
+ pm_mode = ret;
+
+ if (rinfo->type == MAX77620_REGULATOR_TYPE_SD) {
+ ret = max77620_reg_read(parent, MAX77620_PWR_SLAVE,
+ rinfo->cfg_addr, &val);
+ if (ret < 0) {
+ dev_err(reg->dev, "Reg 0x%02x read failed: %d\n",
+ rinfo->cfg_addr, ret);
+ return ret;
+ }
+ fpwm = !!(val & MAX77620_SD_FPWM_MASK);
+ }
+
+ switch (pm_mode) {
+ case MAX77620_POWER_MODE_NORMAL:
+ case MAX77620_POWER_MODE_DISABLE:
+ if (fpwm)
+ reg_mode = REGULATOR_MODE_FAST;
+ else
+ reg_mode = REGULATOR_MODE_NORMAL;
+ break;
+ case MAX77620_POWER_MODE_LPM:
+ case MAX77620_POWER_MODE_GLPM:
+ reg_mode = REGULATOR_MODE_IDLE;
+ break;
+ default:
+ return 0;
+ }
+ return reg_mode;
+}
+
+static int max77620_regulator_set_sleep_mode(struct regulator_dev *rdev,
+ unsigned int mode)
+{
+ struct max77620_regulator *reg = rdev_get_drvdata(rdev);
+ int id = rdev_get_id(rdev);
+ struct max77620_regulator_pdata *rpdata = ®->reg_pdata[id];
+
+ rpdata->sleep_mode = mode;
+ return 0;
+}
+
+static int max77620_regulator_set_ramp_delay(struct regulator_dev *rdev,
+ int ramp_delay)
+{
+ struct max77620_regulator *reg = rdev_get_drvdata(rdev);
+ int id = rdev_get_id(rdev);
+ struct max77620_regulator_info *rinfo = reg->rinfo[id];
+ struct device *parent = reg->max77620_chip->dev;
+ int ret, val;
+ int retval;
+
+ if (rinfo->type == MAX77620_REGULATOR_TYPE_SD) {
+ if (ramp_delay <= 13750) {
+ val = 0;
+ retval = 13750;
+ } else if (ramp_delay <= 27500) {
+ val = 1;
+ retval = 27500;
+ } else if (ramp_delay <= 55000) {
+ val = 2;
+ retval = 55000;
+ } else {
+ val = 3;
+ retval = 100000;
+ }
+ ret = max77620_reg_update(parent, MAX77620_PWR_SLAVE,
+ rinfo->cfg_addr, MAX77620_SD_SR_MASK,
+ val << MAX77620_SD_SR_SHIFT);
+ if (ret < 0) {
+ dev_err(reg->dev, "Reg 0x%02x update failed: %d\n",
+ rinfo->cfg_addr, ret);
+ return ret;
+ }
+ } else {
+ if (ramp_delay <= 5000) {
+ val = 1;
+ retval = 5000;
+ } else {
+ val = 0;
+ retval = 100000;
+ }
+ ret = max77620_reg_update(parent, MAX77620_PWR_SLAVE,
+ rinfo->cfg_addr, MAX77620_LDO_SLEW_RATE_MASK,
+ val);
+ if (ret < 0) {
+ dev_err(reg->dev, "Reg 0x%02x update failed: %d\n",
+ rinfo->cfg_addr, ret);
+ return ret;
+ }
+ }
+ return retval;
+}
+
+static struct regulator_ops max77620_regulator_ops = {
+ .is_enabled = max77620_regulator_is_enabled,
+ .enable = max77620_regulator_enable,
+ .disable = max77620_regulator_disable,
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .set_mode = max77620_regulator_set_mode,
+ .get_mode = max77620_regulator_get_mode,
+ .set_ramp_delay = max77620_regulator_set_ramp_delay,
+ .set_voltage_time_sel = regulator_set_voltage_time_sel,
+};
+
+#define MAX77620_SD_CNF2_ROVS_EN_NONE 0
+#define RAIL_SD(_id, _name, _sname, _volt_mask, _min_uV, _max_uV, \
+ _step_uV, _rs_add, _rs_mask) \
+ [MAX77620_REGULATOR_ID_##_id] = { \
+ .type = MAX77620_REGULATOR_TYPE_SD, \
+ .volt_mask = MAX77620_##_volt_mask##_VOLT_MASK, \
+ .volt_addr = MAX77620_REG_##_id, \
+ .cfg_addr = MAX77620_REG_##_id##_CFG, \
+ .fps_addr = MAX77620_REG_FPS_##_id, \
+ .remote_sense_addr = _rs_add, \
+ .remote_sense_mask = MAX77620_SD_CNF2_ROVS_EN_##_rs_mask, \
+ .min_uV = _min_uV, \
+ .max_uV = _max_uV, \
+ .step_uV = _step_uV, \
+ .power_mode_mask = MAX77620_SD_POWER_MODE_MASK, \
+ .power_mode_shift = MAX77620_SD_POWER_MODE_SHIFT, \
+ .desc = { \
+ .name = max77620_rails(_name), \
+ .supply_name = _sname, \
+ .id = MAX77620_REGULATOR_ID_##_id, \
+ .ops = &max77620_regulator_ops, \
+ .n_voltages = ((_max_uV - _min_uV) / _step_uV) + 1, \
+ .min_uV = _min_uV, \
+ .uV_step = _step_uV, \
+ .enable_time = 500, \
+ .vsel_mask = MAX77620_##_volt_mask##_VOLT_MASK, \
+ .vsel_reg = MAX77620_REG_##_id, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ }, \
+ }
+
+#define RAIL_LDO(_id, _name, _sname, _type, _min_uV, _max_uV, _step_uV) \
+ [MAX77620_REGULATOR_ID_##_id] = { \
+ .type = MAX77620_REGULATOR_TYPE_LDO_##_type, \
+ .volt_mask = MAX77620_LDO_VOLT_MASK, \
+ .volt_addr = MAX77620_REG_##_id##_CFG, \
+ .cfg_addr = MAX77620_REG_##_id##_CFG2, \
+ .fps_addr = MAX77620_REG_FPS_##_id, \
+ .remote_sense_addr = 0xFF, \
+ .min_uV = _min_uV, \
+ .max_uV = _max_uV, \
+ .step_uV = _step_uV, \
+ .power_mode_mask = MAX77620_LDO_POWER_MODE_MASK, \
+ .power_mode_shift = MAX77620_LDO_POWER_MODE_SHIFT, \
+ .desc = { \
+ .name = max77620_rails(_name), \
+ .supply_name = _sname, \
+ .id = MAX77620_REGULATOR_ID_##_id, \
+ .ops = &max77620_regulator_ops, \
+ .n_voltages = ((_max_uV - _min_uV) / _step_uV) + 1, \
+ .min_uV = _min_uV, \
+ .uV_step = _step_uV, \
+ .enable_time = 500, \
+ .vsel_mask = MAX77620_LDO_VOLT_MASK, \
+ .vsel_reg = MAX77620_REG_##_id##_CFG, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ }, \
+ }
+
+static struct max77620_regulator_info max77620_regs_info[MAX77620_NUM_REGS] = {
+ RAIL_SD(SD0, sd0, "in-sd0", SD0, 600000, 1400000, 12500, 0x22, SD0),
+ RAIL_SD(SD1, sd1, "in-sd1", SD1, 600000, 1550000, 12500, 0x22, SD1),
+ RAIL_SD(SD2, sd2, "in-sd2", SDX, 600000, 3787500, 12500, 0xFF, NONE),
+ RAIL_SD(SD3, sd3, "in-sd3", SDX, 600000, 3787500, 12500, 0xFF, NONE),
+ RAIL_SD(SD4, sd4, "in-sd4", SDX, 600000, 3787500, 12500, 0xFF, NONE),
+
+ RAIL_LDO(LDO0, ldo0, "in-ldo0-1", N, 800000, 2375000, 25000),
+ RAIL_LDO(LDO1, ldo1, "in-ldo0-1", N, 800000, 2375000, 25000),
+ RAIL_LDO(LDO2, ldo2, "in-ldo2", P, 800000, 3950000, 50000),
+ RAIL_LDO(LDO3, ldo3, "in-ldo3-5", P, 800000, 3950000, 50000),
+ RAIL_LDO(LDO4, ldo4, "in-ldo4-6", P, 800000, 1587500, 12500),
+ RAIL_LDO(LDO5, ldo5, "in-ldo3-5", P, 800000, 3950000, 50000),
+ RAIL_LDO(LDO6, ldo6, "in-ldo4-6", P, 800000, 3950000, 50000),
+ RAIL_LDO(LDO7, ldo7, "in-ldo7-8", N, 800000, 3950000, 50000),
+ RAIL_LDO(LDO8, ldo8, "in-ldo7-8", N, 800000, 3950000, 50000),
+};
+
+static struct max77620_regulator_info max20024_regs_info[MAX77620_NUM_REGS] = {
+ RAIL_SD(SD0, sd0, "in-sd0", SD0, 800000, 1587500, 12500, 0x22, SD0),
+ RAIL_SD(SD1, sd1, "in-sd1", SD1, 600000, 3387500, 12500, 0x22, SD1),
+ RAIL_SD(SD2, sd2, "in-sd2", SDX, 600000, 3787500, 12500, 0xFF, NONE),
+ RAIL_SD(SD3, sd3, "in-sd3", SDX, 600000, 3787500, 12500, 0xFF, NONE),
+ RAIL_SD(SD4, sd4, "in-sd4", SDX, 600000, 3787500, 12500, 0xFF, NONE),
+
+ RAIL_LDO(LDO0, ldo0, "in-ldo0-1", N, 800000, 2375000, 25000),
+ RAIL_LDO(LDO1, ldo1, "in-ldo0-1", N, 800000, 2375000, 25000),
+ RAIL_LDO(LDO2, ldo2, "in-ldo2", P, 800000, 3950000, 50000),
+ RAIL_LDO(LDO3, ldo3, "in-ldo3-5", P, 800000, 3950000, 50000),
+ RAIL_LDO(LDO4, ldo4, "in-ldo4-6", P, 800000, 1587500, 12500),
+ RAIL_LDO(LDO5, ldo5, "in-ldo3-5", P, 800000, 3950000, 50000),
+ RAIL_LDO(LDO6, ldo6, "in-ldo4-6", P, 800000, 3950000, 50000),
+ RAIL_LDO(LDO7, ldo7, "in-ldo7-8", N, 800000, 3950000, 50000),
+ RAIL_LDO(LDO8, ldo8, "in-ldo7-8", N, 800000, 3950000, 50000),
+};
+
+static struct of_regulator_match max77620_regulator_matches[] = {
+ { .name = "sd0", },
+ { .name = "sd1", },
+ { .name = "sd2", },
+ { .name = "sd3", },
+ { .name = "sd4", },
+ { .name = "ldo0", },
+ { .name = "ldo1", },
+ { .name = "ldo2", },
+ { .name = "ldo3", },
+ { .name = "ldo4", },
+ { .name = "ldo5", },
+ { .name = "ldo6", },
+ { .name = "ldo7", },
+ { .name = "ldo8", },
+};
+
+static int max77620_regulator_preinit(struct max77620_regulator *reg, int id)
+{
+ struct max77620_regulator_pdata *rpdata = ®->reg_pdata[id];
+ struct max77620_regulator_info *rinfo = reg->rinfo[id];
+ struct device *parent = reg->max77620_chip->dev;
+ struct regulator_init_data *ridata = reg->reg_pdata[id].reg_idata;
+ struct regulator_desc *rdesc = &max77620_regs_info[id].desc;
+ int init_uv;
+ u8 val, mask;
+ int ret;
+
+ if (!ridata)
+ return 0;
+
+ /* Update power mode */
+ ret = max77620_regulator_get_power_mode(reg, id);
+ if (ret < 0)
+ return ret;
+ reg->current_power_mode[id] = ret;
+ reg->enable_power_mode[id] = MAX77620_POWER_MODE_NORMAL;
+
+ if (rpdata->active_fps_src == FPS_SRC_DEF) {
+ ret = max77620_regulator_get_fps_src(reg, id);
+ if (ret < 0)
+ return ret;
+ rpdata->active_fps_src = ret;
+ }
+
+ /*
+ * If rails are externally control of FPS control then enable it
+ * always.
+ */
+ if ((rpdata->active_fps_src != FPS_SRC_NONE) &&
+ (reg->current_power_mode[id] != reg->enable_power_mode[id])) {
+ ret = max77620_regulator_set_power_mode(reg,
+ reg->enable_power_mode[id], id);
+ if (ret < 0) {
+ dev_err(reg->dev, "Reg %d pm mode config failed %d\n",
+ id, ret);
+ return ret;
+ }
+ }
+
+ /* Enable rail before changing FPS to NONE to avoid glitch */
+ if (ridata && ridata->constraints.boot_on &&
+ (rpdata->active_fps_src == FPS_SRC_NONE)) {
+ init_uv = ridata->constraints.min_uV;
+ if (init_uv && (init_uv == ridata->constraints.max_uV)) {
+ val = (init_uv - rdesc->min_uV) / rdesc->uV_step;
+ ret = max77620_reg_update(parent, MAX77620_PWR_SLAVE,
+ rdesc->vsel_reg, rdesc->vsel_mask, val);
+ if (ret < 0) {
+ dev_err(reg->dev,
+ "Reg 0x%02x update failed: %d\n",
+ rdesc->vsel_reg, ret);
+ return ret;
+ }
+ }
+
+ ret = max77620_regulator_set_power_mode(reg,
+ reg->enable_power_mode[id], id);
+ if (ret < 0) {
+ dev_err(reg->dev, "Reg %d pm mode config failed %d\n",
+ id, ret);
+ return ret;
+ }
+ }
+
+ ret = max77620_regulator_set_fps_src(reg, rpdata->active_fps_src, id);
+ if (ret < 0) {
+ dev_err(reg->dev, "preinit: Failed to set FPSSRC to %d\n",
+ rpdata->active_fps_src);
+ return ret;
+ }
+
+ ret = max77620_regulator_set_fps_slots(reg, id, false);
+ if (ret < 0) {
+ dev_err(reg->dev, "preinit: Failed to set FPS Slots\n");
+ return ret;
+ }
+
+ if (rinfo->type == MAX77620_REGULATOR_TYPE_SD) {
+ int slew_rate;
+ u8 val_u8;
+
+ ret = max77620_reg_read(parent, MAX77620_PWR_SLAVE,
+ rinfo->cfg_addr, &val_u8);
+ if (ret < 0) {
+ dev_err(reg->dev, "Register 0x%02x read failed: %d\n",
+ rinfo->cfg_addr, ret);
+ return ret;
+ }
+
+ slew_rate = (val_u8 >> MAX77620_SD_SR_SHIFT) & 0x3;
+ switch (slew_rate) {
+ case 0:
+ slew_rate = 13750;
+ break;
+ case 1:
+ slew_rate = 27500;
+ break;
+ case 2:
+ slew_rate = 55000;
+ break;
+ case 3:
+ slew_rate = 100000;
+ break;
+ }
+ rinfo->desc.ramp_delay = slew_rate;
+
+ mask = MAX77620_SD_FSRADE_MASK;
+ val = 0;
+ if (rpdata->sd_fsrade_disable)
+ val |= MAX77620_SD_FSRADE_MASK;
+
+ ret = max77620_reg_update(parent, MAX77620_PWR_SLAVE,
+ rinfo->cfg_addr, mask, val);
+ if (ret < 0) {
+ dev_err(reg->dev, "Reg 0x%02x update failed: %d\n",
+ rinfo->cfg_addr, ret);
+ return ret;
+ }
+ } else {
+ int slew_rate;
+ u8 val_u8;
+
+ ret = max77620_reg_read(parent, MAX77620_PWR_SLAVE,
+ rinfo->cfg_addr, &val_u8);
+ if (ret < 0) {
+ dev_err(reg->dev, "Register 0x%02x read failed: %d\n",
+ rinfo->cfg_addr, ret);
+ return ret;
+ }
+ slew_rate = (val_u8) & 0x1;
+ switch (slew_rate) {
+ case 0:
+ slew_rate = 100000;
+ break;
+ case 1:
+ slew_rate = 5000;
+ break;
+ }
+ rinfo->desc.ramp_delay = slew_rate;
+ }
+
+ if ((id == MAX77620_REGULATOR_ID_SD0) && rpdata->en2_ctrl_sd0) {
+ ret = max77620_regulator_set_power_mode(reg,
+ MAX77620_POWER_MODE_NORMAL, id);
+ if (ret < 0) {
+ dev_err(reg->dev, "Reg %d pm mode set failed: %d\n",
+ id, ret);
+ return ret;
+ }
+ ret = max77620_regulator_set_fps_src(reg, FPS_SRC_0, id);
+ if (ret < 0) {
+ dev_err(reg->dev, "Reg %d fps src set failed: %d\n",
+ id, ret);
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static int max77620_get_regulator_dt_data(struct platform_device *pdev,
+ struct max77620_regulator *max77620_regs)
+{
+ struct device_node *np;
+ u32 prop;
+ int id;
+ int ret;
+
+ np = of_get_child_by_name(pdev->dev.parent->of_node, "regulators");
+ if (!np) {
+ dev_err(&pdev->dev, "Device is not having regulators node\n");
+ return -ENODEV;
+ }
+ pdev->dev.of_node = np;
+
+ ret = of_regulator_match(&pdev->dev, np, max77620_regulator_matches,
+ ARRAY_SIZE(max77620_regulator_matches));
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Parsing of regulator node failed: %d\n",
+ ret);
+ return ret;
+ }
+
+ for (id = 0; id < ARRAY_SIZE(max77620_regulator_matches); ++id) {
+ struct device_node *reg_node;
+ struct max77620_regulator_pdata *reg_pdata =
+ &max77620_regs->reg_pdata[id];
+
+ reg_node = max77620_regulator_matches[id].of_node;
+ reg_pdata->reg_idata = max77620_regulator_matches[id].init_data;
+
+ if (!reg_pdata->reg_idata)
+ continue;
+
+ reg_pdata->glpm_enable = of_property_read_bool(reg_node,
+ "maxim,enable-group-low-power");
+
+ reg_pdata->en2_ctrl_sd0 = of_property_read_bool(reg_node,
+ "maxim,enable-sd0-en2-control");
+
+ reg_pdata->sd_fsrade_disable = of_property_read_bool(reg_node,
+ "maxim,disable-active-discharge");
+
+ reg_pdata->disable_remote_sense_on_suspend =
+ of_property_read_bool(reg_node,
+ "maxim,disable-remote-sense-on-suspend");
+
+ ret = of_property_read_u32(reg_node,
+ "maxim,active-fps-source", &prop);
+ if (!ret)
+ reg_pdata->active_fps_src = prop;
+ else
+ reg_pdata->active_fps_src = FPS_SRC_DEF;
+
+ ret = of_property_read_u32(reg_node,
+ "maxim,active-fps-power-up-slot", &prop);
+ if (!ret)
+ reg_pdata->active_fps_pu_slot = prop;
+ else
+ reg_pdata->active_fps_pu_slot = -1;
+
+ ret = of_property_read_u32(reg_node,
+ "maxim,active-fps-power-down-slot", &prop);
+ if (!ret)
+ reg_pdata->active_fps_pd_slot = prop;
+ else
+ reg_pdata->active_fps_pd_slot = -1;
+
+ reg_pdata->suspend_fps_src = -1;
+ reg_pdata->suspend_fps_pu_slot = -1;
+ reg_pdata->suspend_fps_pd_slot = -1;
+ ret = of_property_read_u32(reg_node,
+ "maxim,suspend-fps-source", &prop);
+ if (!ret)
+ reg_pdata->suspend_fps_src = prop;
+
+ ret = of_property_read_u32(reg_node,
+ "maxim,suspend-fps-power-up-slot", &prop);
+ if (!ret)
+ reg_pdata->suspend_fps_pu_slot = prop;
+
+ ret = of_property_read_u32(reg_node,
+ "maxim,suspend-fps-power-down-slot", &prop);
+ if (!ret)
+ reg_pdata->suspend_fps_pd_slot = prop;
+ }
+ return 0;
+}
+
+static int max77620_regulator_probe(struct platform_device *pdev)
+{
+ struct max77620_chip *max77620_chip = dev_get_drvdata(pdev->dev.parent);
+ struct regulator_desc *rdesc;
+ struct max77620_regulator *pmic;
+ struct regulator_config config = { };
+ struct max77620_regulator_info *regulator_info;
+ int ret = 0;
+ int id;
+
+ pmic = devm_kzalloc(&pdev->dev, sizeof(*pmic), GFP_KERNEL);
+ if (!pmic)
+ return -ENOMEM;
+
+ max77620_get_regulator_dt_data(pdev, pmic);
+
+ platform_set_drvdata(pdev, pmic);
+ pmic->max77620_chip = max77620_chip;
+ pmic->dev = &pdev->dev;
+
+ if (max77620_chip->id == MAX77620)
+ regulator_info = max77620_regs_info;
+ else
+ regulator_info = max20024_regs_info;
+
+ for (id = 0; id < MAX77620_NUM_REGS; ++id) {
+
+ if ((max77620_chip->id == MAX77620) &&
+ (id == MAX77620_REGULATOR_ID_SD4))
+ continue;
+
+ rdesc = ®ulator_info[id].desc;
+ pmic->rinfo[id] = &max77620_regs_info[id];
+ pmic->enable_power_mode[id] = MAX77620_POWER_MODE_NORMAL;
+
+ config.regmap = max77620_chip->rmap[MAX77620_PWR_SLAVE];
+ config.dev = &pdev->dev;
+ config.init_data = pmic->reg_pdata[id].reg_idata;
+ config.driver_data = pmic;
+ config.of_node = max77620_regulator_matches[id].of_node;
+
+ ret = max77620_regulator_preinit(pmic, id);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Preinit regualtor %s failed: %d\n",
+ rdesc->name, ret);
+ return ret;
+ }
+
+ pmic->rdev[id] = devm_regulator_register(&pdev->dev,
+ rdesc, &config);
+ if (IS_ERR(pmic->rdev[id])) {
+ ret = PTR_ERR(pmic->rdev[id]);
+ dev_err(&pdev->dev,
+ "regulator %s register failed: %d\n",
+ rdesc->name, ret);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int max77620_regulator_suspend(struct device *dev)
+{
+ struct max77620_regulator *pmic = dev_get_drvdata(dev);
+ struct max77620_regulator_pdata *reg_pdata;
+ struct max77620_regulator_info *rinfo;
+ struct device *parent = pmic->dev->parent;
+ int id;
+ int ret;
+
+ for (id = 0; id < MAX77620_NUM_REGS; ++id) {
+ reg_pdata = &pmic->reg_pdata[id];
+ rinfo = pmic->rinfo[id];
+ if (!reg_pdata || !rinfo)
+ continue;
+
+ if (reg_pdata->disable_remote_sense_on_suspend &&
+ (rinfo->remote_sense_addr != 0xFF)) {
+ ret = max77620_reg_update(parent, MAX77620_PWR_SLAVE,
+ rinfo->remote_sense_addr,
+ rinfo->remote_sense_mask, 0);
+ if (ret < 0)
+ dev_err(dev, "Reg 0x%02x update failed: %d\n",
+ rinfo->remote_sense_addr, ret);
+ }
+
+ if (reg_pdata->sleep_mode &&
+ (rinfo->type == MAX77620_REGULATOR_TYPE_SD)) {
+ reg_pdata->normal_mode = reg_pdata->current_mode;
+ ret = max77620_regulator_set_sleep_mode(pmic->rdev[id],
+ reg_pdata->sleep_mode);
+ if (ret < 0)
+ dev_err(dev,
+ "Regulator %d sleep mode failed: %d\n",
+ id, ret);
+ }
+
+ max77620_regulator_set_fps_slots(pmic, id, true);
+ if (reg_pdata->suspend_fps_src >= 0)
+ max77620_regulator_set_fps_src(pmic,
+ reg_pdata->suspend_fps_src, id);
+ }
+ return 0;
+}
+
+static int max77620_regulator_resume(struct device *dev)
+{
+ struct max77620_regulator *pmic = dev_get_drvdata(dev);
+ struct max77620_regulator_pdata *reg_pdata;
+ struct max77620_regulator_info *rinfo;
+ struct device *parent = pmic->dev->parent;
+ int id;
+ int ret;
+
+ for (id = 0; id < MAX77620_NUM_REGS; ++id) {
+ reg_pdata = &pmic->reg_pdata[id];
+ rinfo = pmic->rinfo[id];
+ if (!reg_pdata || !rinfo)
+ continue;
+
+ if (reg_pdata->disable_remote_sense_on_suspend &&
+ (rinfo->remote_sense_addr != 0xFF)) {
+ ret = max77620_reg_update(parent, MAX77620_PWR_SLAVE,
+ rinfo->remote_sense_addr,
+ rinfo->remote_sense_mask,
+ rinfo->remote_sense_mask);
+ if (ret < 0)
+ dev_err(dev, "Reg 0x%02x update failed: %d\n",
+ rinfo->remote_sense_addr, ret);
+ }
+
+ if (reg_pdata->sleep_mode &&
+ (rinfo->type == MAX77620_REGULATOR_TYPE_SD)) {
+ ret = max77620_regulator_set_sleep_mode(pmic->rdev[id],
+ reg_pdata->normal_mode);
+ if (ret < 0)
+ dev_err(dev,
+ "Regulator %d normal mode failed: %d\n",
+ id, ret);
+ }
+
+ max77620_regulator_set_fps_slots(pmic, id, false);
+ if (reg_pdata->active_fps_src >= 0)
+ max77620_regulator_set_fps_src(pmic,
+ reg_pdata->active_fps_src, id);
+ }
+ return 0;
+}
+#endif
+
+static const struct dev_pm_ops max77620_regulator_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(max77620_regulator_suspend,
+ max77620_regulator_resume)
+};
+
+static struct platform_device_id max77620_regulator_devtype[] = {
+ {
+ .name = "max77620-pmic",
+ },
+ {
+ .name = "max20024-pmic",
+ },
+};
+
+static struct platform_driver max77620_regulator_driver = {
+ .probe = max77620_regulator_probe,
+ .id_table = max77620_regulator_devtype,
+ .driver = {
+ .name = "max77620-pmic",
+ .owner = THIS_MODULE,
+ .pm = &max77620_regulator_pm_ops,
+ },
+};
+
+static int __init max77620_regulator_init(void)
+{
+ return platform_driver_register(&max77620_regulator_driver);
+}
+subsys_initcall(max77620_regulator_init);
+
+static void __exit max77620_reg_exit(void)
+{
+ platform_driver_unregister(&max77620_regulator_driver);
+}
+module_exit(max77620_reg_exit);
+
+MODULE_DESCRIPTION("MAX77620/MAX20024 regulator driver");
+MODULE_AUTHOR("Mallikarjun Kasoju <mkasoju@...dia.com>");
+MODULE_AUTHOR("Laxman Dewangan <ldewangan@...dia.com>");
+MODULE_ALIAS("platform:max77620-pmic");
+MODULE_LICENSE("GPL v2");
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists