| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1452292166-20118-4-git-send-email-richard.dorsch@gmail.com>
Date: Fri, 8 Jan 2016 14:29:23 -0800
From: richard.dorsch@...il.com
To: linux-kernel@...r.kernel.org
Cc: lm-sensors@...sensors.org, linux-i2c@...r.kernel.org,
linux-watchdog@...r.kernel.org, linux-gpio@...r.kernel.org,
lee.jones@...aro.org, jdelvare@...e.com, linux@...ck-us.net,
wim@...ana.be, jo.sunga@...antech.com,
Richard Vidal-Dorsch <richard.dorsch@...il.com>
Subject: [PATCH 3/6] Add Advantech iManager HWmon driver
From: Richard Vidal-Dorsch <richard.dorsch@...il.com>
---
Documentation/hwmon/imanager | 59 ++
drivers/hwmon/Kconfig | 12 +
drivers/hwmon/Makefile | 2 +
drivers/hwmon/imanager-ec-hwmon.c | 606 +++++++++++++++++++++
drivers/hwmon/imanager-hwmon.c | 1058 ++++++++++++++++++++++++++++++++++++
include/linux/mfd/imanager/hwmon.h | 120 ++++
6 files changed, 1857 insertions(+)
create mode 100644 Documentation/hwmon/imanager
create mode 100644 drivers/hwmon/imanager-ec-hwmon.c
create mode 100644 drivers/hwmon/imanager-hwmon.c
create mode 100644 include/linux/mfd/imanager/hwmon.h
diff --git a/Documentation/hwmon/imanager b/Documentation/hwmon/imanager
new file mode 100644
index 0000000..0705cf9
--- /dev/null
+++ b/Documentation/hwmon/imanager
@@ -0,0 +1,59 @@
+Kernel driver imanager_hwmon
+============================
+
+This platform driver provides support for iManager Hardware Monitoring
+and FAN control.
+
+This driver depends on imanager (mfd).
+
+Description
+-----------
+
+This driver provides support for the Advantech iManager Hardware Monitoring EC.
+
+The Advantech iManager supports up to 3 fan rotation speed sensors,
+3 temperature monitoring sources and up to 5 voltage sensors, VID, alarms and
+a automatic fan regulation strategy (as well as manual fan control mode).
+
+Temperatures are measured in degrees Celsius and measurement resolution is
+1 degC. An Alarm is triggered when the temperature gets higher than the high
+limit; it stays on until the temperature falls below the high limit.
+
+Fan rotation speeds are reported in RPM (rotations per minute). An alarm is
+triggered if the rotation speed has dropped below a programmable limit. No fan
+speed divider support available.
+
+Voltage sensors (also known as IN sensors) report their values in millivolts.
+An alarm is triggered if the voltage has crossed a programmable minimum
+or maximum limit.
+
+The driver supports automatic fan control mode known as Thermal Cruise.
+In this mode, the firmware attempts to keep the measured temperature in a
+predefined temperature range. If the temperature goes out of range, fan
+is driven slower/faster to reach the predefined range again.
+
+The mode works for fan1-fan3.
+
+sysfs attributes
+----------------
+
+pwm[1-3] - this file stores PWM duty cycle or DC value (fan speed) in range:
+ 0 (lowest speed) to 255 (full)
+
+pwm[1-3]_enable - this file controls mode of fan/temperature control:
+ * 0 Fan control disabled (fans set to maximum speed)
+ * 1 Manual mode, write to pwm[1-3] any value 0-255
+ * 2 "Fan Speed Cruise" mode
+
+pwm[1-3]_mode - controls if output is PWM or DC level
+ * 0 DC output
+ * 1 PWM output
+
+Speed Cruise mode (2)
+---------------------
+
+This mode tries to keep the fan speed constant within min/max speed.
+
+fan[1-3]_min - Minimum fan speed
+fan[1-3]_max - Maximum fan speed
+
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 80a73bf..776bb8a 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -613,6 +613,18 @@ config SENSORS_CORETEMP
sensor inside your CPU. Most of the family 6 CPUs
are supported. Check Documentation/hwmon/coretemp for details.
+config SENSORS_IMANAGER
+ tristate "Advantech iManager Hardware Monitoring"
+ depends on MFD_IMANAGER
+ select HWMON_VID
+ help
+ This enables support for Advantech iManager hardware monitoring
+ of some Advantech SOM, MIO, AIMB, and PCM modules/boards.
+ Requires mfd-core and imanager-core to function properly.
+
+ This driver can also be built as a module. If so, the module
+ will be called imanager_hwmon.
+
config SENSORS_IT87
tristate "ITE IT87xx and compatibles"
depends on !PPC
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 12a3239..53752bc 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -76,6 +76,8 @@ obj-$(CONFIG_SENSORS_IBMAEM) += ibmaem.o
obj-$(CONFIG_SENSORS_IBMPEX) += ibmpex.o
obj-$(CONFIG_SENSORS_IBMPOWERNV)+= ibmpowernv.o
obj-$(CONFIG_SENSORS_IIO_HWMON) += iio_hwmon.o
+imanager_hwmon-objs := imanager-hwmon.o imanager-ec-hwmon.o
+obj-$(CONFIG_SENSORS_IMANAGER) += imanager_hwmon.o
obj-$(CONFIG_SENSORS_INA209) += ina209.o
obj-$(CONFIG_SENSORS_INA2XX) += ina2xx.o
obj-$(CONFIG_SENSORS_IT87) += it87.o
diff --git a/drivers/hwmon/imanager-ec-hwmon.c b/drivers/hwmon/imanager-ec-hwmon.c
new file mode 100644
index 0000000..c5c5920
--- /dev/null
+++ b/drivers/hwmon/imanager-ec-hwmon.c
@@ -0,0 +1,606 @@
+/*
+ * Advantech iManager Hardware Monitoring core
+ *
+ * Copyright (C) 2015 Advantech Co., Ltd., Irvine, CA, USA
+ * Author: Richard Vidal-Dorsch <richard.dorsch@...antech.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/bug.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/byteorder/generic.h>
+#include <linux/swab.h>
+#include <linux/mfd/imanager/ec.h>
+#include <linux/mfd/imanager/hwmon.h>
+
+#define HWM_STATUS_UNDEFINED_ITEM 2UL
+#define HWM_STATUS_UNDEFINED_DID 3UL
+#define HWM_STATUS_UNDEFINED_HWPIN 4UL
+
+/*
+ * FAN defs
+ */
+
+struct fan_dev_config {
+ u8 did,
+ hwpin,
+ tachoid,
+ status,
+ control,
+ temp_max,
+ temp_min,
+ temp_stop,
+ pwm_max,
+ pwm_min;
+ u16 rpm_max;
+ u16 rpm_min;
+ u8 debounce; /* debounce time, not used */
+ u8 temp; /* Current Thermal Zone Temperature */
+ u16 rpm_target; /* RPM Target Speed, not used */
+};
+
+struct fan_status {
+ u32 sysctl : 1, /* System Control flag */
+ tacho : 1, /* FAN tacho source defined */
+ pulse : 1, /* FAN pulse type defined */
+ thermal : 1, /* Thermal zone init */
+ i2clink : 1, /* I2C protocol fail flag (thermal sensor) */
+ dnc : 1, /* don't care */
+ mode : 2; /* FAN Control mode */
+};
+
+struct fan_alert_limit {
+ u16 fan0_min,
+ fan0_max,
+ fan1_min,
+ fan1_max,
+ fan2_min,
+ fan2_max;
+};
+
+struct fan_alert_flag {
+ u32 fan0_min_alarm : 1,
+ fan0_max_alarm : 1,
+ fan1_min_alarm : 1,
+ fan1_max_alarm : 1,
+ fan2_min_alarm : 1,
+ fan2_max_alarm : 1,
+ dnc : 2; /* don't care */
+};
+
+/*----------------------------------------------------*
+ * FAN Control bit field *
+ * enable: 0:Disabled, 1:Enabled *
+ * type: 0:PWM, 1:RPM *
+ * pulse: 0:Undefined 1:2 Pulse 2:4 Pulse *
+ * tacho: 1:CPU FAN, 2:SYS1 FAN, 3:SYS2 FAN *
+ * mode: 0:Off, 1:Full, 2:Manual, 3:Auto *
+ *- 7 6 ---- 5 4 --- 3 2 ----- 1 -------- 0 -------*
+ * MODE | TACHO | PULSE | TYPE | ENABLE *
+ *----------------------------------------------------*/
+struct fan_ctrl {
+ u32 enable : 1, /* SmartFAN control on/off */
+ type : 1, /* FAN control type [0, 1] PWM/RPM */
+ pulse : 2, /* FAN pulse [0..2] */
+ tacho : 2, /* FAN Tacho Input [1..3] */
+ mode : 2; /* off/full/manual/auto */
+};
+
+enum fan_dev_ctrl {
+ CTRL_STATE = 3,
+ OPMODE,
+ IDSENSOR,
+ ACTIVE,
+ CTRL_MODE,
+};
+
+enum fan_limit {
+ LIMIT_PWM,
+ LIMIT_RPM,
+ LIMIT_TEMP,
+};
+
+static const char * const fan_temp_label[] = {
+ "Temp CPU",
+ "Temp SYS1",
+ "Temp SYS2",
+ NULL,
+};
+
+static const struct imanager_hwmon_device *hwmon;
+
+static inline int hwm_get_adc_value(u8 did)
+{
+ return imanager_read_word(EC_CMD_HWP_RD, did);
+}
+
+static inline int hwm_get_rpm_value(u8 did)
+{
+ return imanager_read_word(EC_CMD_HWP_RD, did);
+}
+
+static inline int hwm_get_pwm_value(u8 did)
+{
+ return imanager_read_byte(EC_CMD_HWP_RD, did);
+}
+
+static inline int hwm_set_pwm_value(u8 did, u8 val)
+{
+ return imanager_write_byte(EC_CMD_HWP_WR, did, val);
+}
+
+static int hwm_read_fan_config(int num, struct fan_dev_config *cfg)
+{
+ int ret;
+ struct ec_message msg = {
+ .rlen = 0xff, /* use alternative message body */
+ .wlen = 0,
+ };
+ struct fan_dev_config *_cfg = (struct fan_dev_config *)&msg.u.data;
+
+ if (WARN_ON(!cfg))
+ return -EINVAL;
+
+ memset(cfg, 0, sizeof(struct fan_dev_config));
+
+ ret = imanager_msg_read(EC_CMD_FAN_CTL_RD, num, &msg);
+ if (ret)
+ return ret;
+
+ if (!_cfg->did) {
+ pr_err("Invalid FAN%d device ID - possible firmware bug\n",
+ num);
+ return -ENODEV;
+ }
+
+ memcpy(cfg, &msg.u.data, sizeof(struct fan_dev_config));
+
+ return 0;
+}
+
+static int hwm_write_fan_config(int fnum, struct fan_dev_config *cfg)
+{
+ int ret;
+ struct ec_message msg = {
+ .rlen = 0,
+ .wlen = sizeof(struct fan_dev_config),
+ };
+
+ if (!cfg->did)
+ return -ENODEV;
+
+ msg.data = (u8 *)cfg;
+
+ ret = imanager_msg_write(EC_CMD_FAN_CTL_WR, fnum, &msg);
+ if (ret < 0)
+ return ret;
+
+ switch (ret) {
+ case 0:
+ break;
+ case HWM_STATUS_UNDEFINED_ITEM:
+ case HWM_STATUS_UNDEFINED_DID:
+ case HWM_STATUS_UNDEFINED_HWPIN:
+ return -EFAULT;
+ default:
+ pr_err("Unknown error status of fan%d (%d)\n", fnum, ret);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static inline void hwm_set_temp_limit(struct fan_dev_config *cfg,
+ const struct hwm_fan_temp_limit *temp)
+{
+ cfg->temp_stop = temp->stop;
+ cfg->temp_min = temp->min;
+ cfg->temp_max = temp->max;
+}
+
+static inline void hwm_set_pwm_limit(struct fan_dev_config *cfg,
+ const struct hwm_fan_limit *pwm)
+{
+ cfg->pwm_min = pwm->min;
+ cfg->pwm_max = pwm->max;
+}
+
+static inline void hwm_set_rpm_limit(struct fan_dev_config *cfg,
+ const struct hwm_fan_limit *rpm)
+{
+ cfg->rpm_min = swab16(rpm->min);
+ cfg->rpm_max = swab16(rpm->max);
+}
+
+static inline void hwm_set_limit(struct fan_dev_config *cfg,
+ const struct hwm_sensors_limit *limit)
+{
+ hwm_set_temp_limit(cfg, &limit->temp);
+ hwm_set_pwm_limit(cfg, &limit->pwm);
+ hwm_set_rpm_limit(cfg, &limit->rpm);
+}
+
+static int hwm_core_get_fan_alert_flag(struct fan_alert_flag *flag)
+{
+ int ret;
+ u8 *value = (u8 *)flag;
+
+ ret = imanager_acpiram_read_byte(EC_ACPIRAM_FAN_ALERT);
+ if (ret < 0)
+ return ret;
+
+ *value = ret;
+
+ return 0;
+}
+
+static int hwm_core_get_fan_alert_limit(int fnum,
+ struct hwm_smartfan *fan)
+{
+ int ret;
+ struct fan_alert_limit limit;
+ struct fan_alert_flag flag;
+
+ ret = imanager_acpiram_read_block(EC_ACPIRAM_FAN_SPEED_LIMIT,
+ (u8 *)&limit, sizeof(limit));
+ if (ret < 0)
+ return ret;
+
+ ret = hwm_core_get_fan_alert_flag(&flag);
+ if (ret < 0)
+ return ret;
+
+ switch (fnum) {
+ case FAN_CPU:
+ fan->alert.min = swab16(limit.fan0_min);
+ fan->alert.max = swab16(limit.fan0_max);
+ fan->alert.min_alarm = flag.fan0_min_alarm;
+ fan->alert.max_alarm = flag.fan0_max_alarm;
+ break;
+ case FAN_SYS1:
+ fan->alert.min = swab16(limit.fan1_min);
+ fan->alert.max = swab16(limit.fan1_max);
+ fan->alert.min_alarm = flag.fan1_min_alarm;
+ fan->alert.max_alarm = flag.fan1_max_alarm;
+ break;
+ case FAN_SYS2:
+ fan->alert.min = swab16(limit.fan2_min);
+ fan->alert.max = swab16(limit.fan2_max);
+ fan->alert.min_alarm = flag.fan2_min_alarm;
+ fan->alert.max_alarm = flag.fan2_max_alarm;
+ break;
+ default:
+ pr_err("Unknown FAN ID %d\n", fnum);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int hwm_core_fan_set_alert_limit(int fnum,
+ struct hwm_fan_alert *alert)
+{
+ int ret;
+ struct fan_alert_limit limit;
+
+ ret = imanager_acpiram_read_block(EC_ACPIRAM_FAN_SPEED_LIMIT,
+ (u8 *)&limit, sizeof(limit));
+ if (ret < 0)
+ return ret;
+
+ switch (fnum) {
+ case FAN_CPU:
+ limit.fan0_min = swab16(alert->min);
+ limit.fan0_max = swab16(alert->max);
+ break;
+ case FAN_SYS1:
+ limit.fan1_min = swab16(alert->min);
+ limit.fan1_max = swab16(alert->max);
+ break;
+ case FAN_SYS2:
+ limit.fan2_min = swab16(alert->min);
+ limit.fan2_max = swab16(alert->max);
+ break;
+ default:
+ pr_err("Unknown FAN ID %d\n", fnum);
+ return -EINVAL;
+ }
+
+ return imanager_acpiram_write_block(EC_ACPIRAM_FAN_SPEED_LIMIT,
+ (u8 *)&limit, sizeof(limit));
+}
+
+/* HWM CORE API */
+
+const char *hwm_core_adc_get_label(int num)
+{
+ if (WARN_ON(num >= hwmon->adc.num))
+ return NULL;
+
+ return hwmon->adc.attr[num].label;
+}
+
+const char *hwm_core_fan_get_label(int num)
+{
+ if (WARN_ON(num >= hwmon->fan.num))
+ return NULL;
+
+ return hwmon->fan.attr[num].label;
+}
+
+const char *hwm_core_fan_get_temp_label(int num)
+{
+ if (WARN_ON(num >= hwmon->fan.num))
+ return NULL;
+
+ return fan_temp_label[num];
+}
+
+int hwm_core_adc_is_available(int num)
+{
+ if (num >= EC_HWM_MAX_ADC)
+ return -EINVAL;
+
+ return hwmon->adc.attr[num].did ? 0 : -ENODEV;
+}
+
+int hwm_core_adc_get_value(int num, struct hwm_voltage *volt)
+{
+ int ret;
+
+ volt->valid = false;
+
+ ret = hwm_core_adc_is_available(num);
+ if (ret < 0)
+ return ret;
+
+ ret = hwm_get_adc_value(hwmon->adc.attr[num].did);
+ if (ret < 0)
+ return ret;
+
+ volt->value = ret * hwmon->adc.attr[num].scale;
+ volt->valid = true;
+
+ return 0;
+}
+
+int hwm_core_fan_get_ctrl(int num, struct hwm_smartfan *fan)
+{
+ int ret;
+ struct fan_dev_config cfg;
+ struct fan_ctrl *ctrl = (struct fan_ctrl *)&cfg.control;
+
+ if (WARN_ON((num >= HWM_MAX_FAN) || !fan))
+ return -EINVAL;
+
+ memset(fan, 0, sizeof(struct hwm_smartfan));
+
+ ret = hwm_read_fan_config(num, &cfg);
+ if (ret < 0)
+ return ret;
+
+ fan->pulse = ctrl->pulse;
+ fan->type = ctrl->type;
+
+ /*
+ * It seems that fan->mode does not always report the correct
+ * FAN mode so the only way of reporting the current FAN mode
+ * is to read back ctrl->mode.
+ */
+ fan->mode = ctrl->mode;
+
+ ret = hwm_get_rpm_value(cfg.tachoid);
+ if (ret < 0) {
+ pr_err("Failed to read FAN speed\n");
+ return ret;
+ }
+
+ fan->speed = ret;
+
+ ret = hwm_get_pwm_value(hwmon->fan.attr[num].did);
+ if (ret < 0) {
+ pr_err("Failed to read FAN%d PWM\n", num);
+ return ret;
+ }
+
+ fan->pwm = ret;
+
+ fan->alarm = (fan->pwm && !fan->speed) ? 1 : 0;
+
+ fan->limit.temp.min = cfg.temp_min;
+ fan->limit.temp.max = cfg.temp_max;
+ fan->limit.temp.stop = cfg.temp_stop;
+ fan->limit.pwm.min = cfg.pwm_min;
+ fan->limit.pwm.max = cfg.pwm_max;
+ fan->limit.rpm.min = swab16(cfg.rpm_min);
+ fan->limit.rpm.max = swab16(cfg.rpm_max);
+
+ ret = hwm_core_get_fan_alert_limit(num, fan);
+ if (ret)
+ return ret;
+
+ fan->valid = true;
+
+ return 0;
+}
+
+int hwm_core_fan_set_ctrl(int num, int fmode, int ftype, int pwm, int pulse,
+ struct hwm_sensors_limit *limit,
+ struct hwm_fan_alert *alert)
+{
+ int ret;
+ struct fan_dev_config cfg;
+ struct fan_ctrl *ctrl = (struct fan_ctrl *)&cfg.control;
+ struct hwm_sensors_limit _limit = { {0, 0, 0}, {0, 0}, {0, 0} };
+
+ if (WARN_ON(num >= HWM_MAX_FAN))
+ return -EINVAL;
+
+ ret = hwm_read_fan_config(num, &cfg);
+ if (ret < 0) {
+ pr_err("Failed while reading FAN %s config\n",
+ hwmon->fan.attr[num].label);
+ return ret;
+ }
+
+ if (!limit)
+ limit = &_limit;
+
+ switch (fmode) {
+ case MODE_OFF:
+ ctrl->type = CTRL_PWM;
+ ctrl->mode = MODE_OFF;
+ break;
+ case MODE_FULL:
+ ctrl->type = CTRL_PWM;
+ ctrl->mode = MODE_FULL;
+ break;
+ case MODE_MANUAL:
+ ctrl->type = CTRL_PWM;
+ ctrl->mode = MODE_MANUAL;
+ ret = hwm_set_pwm_value(hwmon->fan.attr[num].did, pwm);
+ if (ret < 0)
+ return ret;
+ break;
+ case MODE_AUTO:
+ switch (ftype) {
+ case CTRL_PWM:
+ limit->rpm.min = 0;
+ limit->rpm.max = 0;
+ ctrl->type = CTRL_PWM;
+ break;
+ case CTRL_RPM:
+ limit->pwm.min = 0;
+ limit->pwm.max = 0;
+ ctrl->type = CTRL_RPM;
+ break;
+ default:
+ return -EINVAL;
+ }
+ ctrl->mode = MODE_AUTO;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ hwm_set_limit(&cfg, limit);
+
+ ctrl->pulse = (pulse && (pulse < 3)) ? pulse : 0;
+ ctrl->enable = 1;
+
+ ret = hwm_write_fan_config(num, &cfg);
+ if (ret < 0)
+ return ret;
+
+ if (alert)
+ return hwm_core_fan_set_alert_limit(num, alert);
+
+ return 0;
+}
+
+int hwm_core_fan_is_available(int num)
+{
+ if (WARN_ON(num >= HWM_MAX_FAN))
+ return -EINVAL;
+
+ return hwmon->fan.active & (1 << num) &&
+ hwmon->fan.attr[num].did ? 0 : -ENODEV;
+}
+
+static int hwm_core_fan_set_limit(int num, int fan_limit,
+ struct hwm_sensors_limit *limit)
+{
+ struct fan_dev_config cfg;
+ int ret;
+
+ if (WARN_ON(num >= HWM_MAX_FAN))
+ return -EINVAL;
+
+ ret = hwm_read_fan_config(num, &cfg);
+ if (ret < 0) {
+ pr_err("Failed while reading FAN %s config\n",
+ hwmon->fan.attr[num].label);
+ return ret;
+ }
+
+ switch (fan_limit) {
+ case LIMIT_PWM:
+ hwm_set_pwm_limit(&cfg, &limit->pwm);
+ break;
+ case LIMIT_RPM:
+ hwm_set_rpm_limit(&cfg, &limit->rpm);
+ break;
+ case LIMIT_TEMP:
+ hwm_set_temp_limit(&cfg, &limit->temp);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return hwm_write_fan_config(num, &cfg);
+}
+
+int hwm_core_fan_set_rpm_limit(int num, int min, int max)
+{
+ struct hwm_sensors_limit limit = {
+ .rpm = {
+ .min = min,
+ .max = max,
+ },
+ };
+
+ return hwm_core_fan_set_limit(num, LIMIT_RPM, &limit);
+}
+
+int hwm_core_fan_set_pwm_limit(int num, int min, int max)
+{
+ struct hwm_sensors_limit limit = {
+ .pwm = {
+ .min = min,
+ .max = max,
+ },
+ };
+
+ return hwm_core_fan_set_limit(num, LIMIT_PWM, &limit);
+}
+
+int hwm_core_fan_set_temp_limit(int num, int stop, int min, int max)
+{
+ struct hwm_sensors_limit limit = {
+ .temp = {
+ .stop = stop,
+ .min = min,
+ .max = max,
+ },
+ };
+
+ return hwm_core_fan_set_limit(num, LIMIT_TEMP, &limit);
+}
+
+int hwm_core_adc_get_max_count(void)
+{
+ return hwmon->adc.num;
+}
+
+int hwm_core_fan_get_max_count(void)
+{
+ return hwmon->fan.num;
+}
+
+int hwm_core_init(void)
+{
+ hwmon = imanager_get_hwmon_device();
+ if (!hwmon)
+ return -ENODEV;
+
+ return 0;
+}
+
diff --git a/drivers/hwmon/imanager-hwmon.c b/drivers/hwmon/imanager-hwmon.c
new file mode 100644
index 0000000..607b9ef
--- /dev/null
+++ b/drivers/hwmon/imanager-hwmon.c
@@ -0,0 +1,1058 @@
+/*
+ * Advantech iManager Hardware Monitoring driver
+ * Derived from nct6775 driver
+ *
+ * Copyright (C) 2015 Advantech Co., Ltd., Irvine, CA, USA
+ * Author: Richard Vidal-Dorsch <richard.dorsch@...antech.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/platform_device.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/hwmon-vid.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/io.h>
+#include <linux/mfd/imanager/core.h>
+#include <linux/mfd/imanager/hwmon.h>
+
+struct imanager_hwmon_data {
+ struct imanager_device_data *idev;
+ bool valid; /* if set, below values are valid */
+ struct hwm_data hwm;
+ int adc_num;
+ int fan_num;
+ unsigned long samples;
+ unsigned long last_updated;
+ const struct attribute_group *groups[3];
+};
+
+static inline u32 in_from_reg(u16 val)
+{
+ return clamp_val(DIV_ROUND_CLOSEST(val * SCALE_IN, 1000), 0, 65535);
+}
+
+static inline u16 in_to_reg(u32 val)
+{
+ return clamp_val(DIV_ROUND_CLOSEST(val * 1000, SCALE_IN), 0, 65535);
+}
+
+static struct imanager_hwmon_data *
+imanager_hwmon_update_device(struct device *dev)
+{
+ struct imanager_hwmon_data *data = dev_get_drvdata(dev);
+ int i;
+
+ mutex_lock(&data->idev->lock);
+
+ if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+ || !data->valid) {
+ /* Measured voltages */
+ for (i = 0; i < data->adc_num; i++)
+ hwm_core_adc_get_value(i, &data->hwm.volt[i]);
+
+ /* Measured fan speeds */
+ for (i = 0; i < data->fan_num; i++)
+ hwm_core_fan_get_ctrl(i, &data->hwm.fan[i]);
+
+ data->last_updated = jiffies;
+ data->valid = true;
+ }
+
+ mutex_unlock(&data->idev->lock);
+
+ return data;
+}
+
+static ssize_t
+show_in(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct imanager_hwmon_data *data = imanager_hwmon_update_device(dev);
+ int index = to_sensor_dev_attr(attr)->index;
+ struct hwm_voltage *adc = &data->hwm.volt[index];
+
+ return sprintf(buf, "%u\n", in_from_reg(adc->value));
+}
+
+static ssize_t
+show_in_min(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct imanager_hwmon_data *data = imanager_hwmon_update_device(dev);
+ int index = to_sensor_dev_attr(attr)->index;
+ struct hwm_voltage *adc = &data->hwm.volt[index];
+
+ return sprintf(buf, "%u\n", in_from_reg(adc->min));
+}
+
+static ssize_t
+show_in_max(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct imanager_hwmon_data *data = imanager_hwmon_update_device(dev);
+ int index = to_sensor_dev_attr(attr)->index;
+ struct hwm_voltage *adc = &data->hwm.volt[index];
+
+ return sprintf(buf, "%u\n", in_from_reg(adc->max));
+}
+
+static ssize_t
+store_in_min(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct imanager_hwmon_data *data = imanager_hwmon_update_device(dev);
+ int index = to_sensor_dev_attr(attr)->index;
+ struct hwm_voltage *adc = &data->hwm.volt[index];
+ unsigned long val;
+ int err;
+
+ err = kstrtoul(buf, 10, &val);
+ if (err < 0)
+ return err;
+
+ mutex_lock(&data->idev->lock);
+
+ adc->min = in_to_reg(val);
+
+ mutex_unlock(&data->idev->lock);
+
+ return count;
+}
+
+static ssize_t
+store_in_max(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct imanager_hwmon_data *data = imanager_hwmon_update_device(dev);
+ int index = to_sensor_dev_attr(attr)->index;
+ struct hwm_voltage *adc = &data->hwm.volt[index];
+ unsigned long val;
+ int err;
+
+ err = kstrtoul(buf, 10, &val);
+ if (err < 0)
+ return err;
+
+ mutex_lock(&data->idev->lock);
+
+ adc->max = in_to_reg(val);
+
+ mutex_unlock(&data->idev->lock);
+
+ return count;
+}
+
+static ssize_t
+show_in_alarm(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct imanager_hwmon_data *data = imanager_hwmon_update_device(dev);
+ int index = to_sensor_dev_attr(attr)->index;
+ struct hwm_voltage *adc = &data->hwm.volt[index];
+ int val = 0;
+
+ if (adc->valid)
+ val = (adc->value < adc->min) || (adc->value > adc->max);
+
+ return sprintf(buf, "%u\n", val);
+}
+
+static ssize_t
+show_in_average(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct imanager_hwmon_data *data = imanager_hwmon_update_device(dev);
+ int index = to_sensor_dev_attr(attr)->index;
+ struct hwm_voltage *adc = &data->hwm.volt[index];
+
+ if (adc->average)
+ adc->average =
+ DIV_ROUND_CLOSEST(adc->average * data->samples +
+ adc->value, ++data->samples);
+ else {
+ adc->average = adc->value;
+ data->samples = 1;
+ }
+
+ return sprintf(buf, "%u\n", in_from_reg(adc->average));
+}
+
+static ssize_t
+show_in_lowest(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct imanager_hwmon_data *data = imanager_hwmon_update_device(dev);
+ int index = to_sensor_dev_attr(attr)->index;
+ struct hwm_voltage *adc = &data->hwm.volt[index];
+
+ if (!adc->lowest)
+ adc->lowest = adc->highest = adc->value;
+ else if (adc->value < adc->lowest)
+ adc->lowest = adc->value;
+
+ return sprintf(buf, "%u\n", in_from_reg(adc->lowest));
+}
+
+static ssize_t
+show_in_highest(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct imanager_hwmon_data *data = imanager_hwmon_update_device(dev);
+ int index = to_sensor_dev_attr(attr)->index;
+ struct hwm_voltage *adc = &data->hwm.volt[index];
+
+ if (!adc->highest)
+ adc->highest = adc->value;
+ else if (adc->value > adc->highest)
+ adc->highest = adc->value;
+
+ return sprintf(buf, "%u\n", in_from_reg(adc->highest));
+}
+
+static ssize_t
+store_in_reset_history(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct imanager_hwmon_data *data = imanager_hwmon_update_device(dev);
+ int index = to_sensor_dev_attr(attr)->index;
+ struct hwm_voltage *adc = &data->hwm.volt[index];
+ unsigned long val;
+ int err;
+
+ err = kstrtoul(buf, 10, &val);
+ if (err < 0)
+ return err;
+
+ mutex_lock(&data->idev->lock);
+
+ if (val == 1) {
+ adc->lowest = 0;
+ adc->highest = 0;
+ } else {
+ count = -EINVAL;
+ }
+
+ mutex_unlock(&data->idev->lock);
+
+ return count;
+}
+
+static ssize_t
+show_temp(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct imanager_hwmon_data *data = imanager_hwmon_update_device(dev);
+ int index = to_sensor_dev_attr(attr)->index;
+ struct hwm_smartfan *fan = &data->hwm.fan[index - 1];
+
+ return sprintf(buf, "%u\n", fan->temp * 1000);
+}
+
+static ssize_t
+show_fan_in(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct imanager_hwmon_data *data = imanager_hwmon_update_device(dev);
+ int index = to_sensor_dev_attr(attr)->index;
+ struct hwm_smartfan *fan = &data->hwm.fan[index - 1];
+
+ return sprintf(buf, "%u\n", fan->valid ? fan->speed : 0);
+}
+
+static inline int is_alarm(const struct hwm_smartfan *fan)
+{
+ /*
+ * Do not set ALARM flag if FAN is in speed cruise mode (3)
+ * as this mode automatically turns on the FAN
+ * Set ALARM flag when pwm is set but speed is 0 as this
+ * could be a defective FAN or no FAN is present
+ */
+ return (!fan->valid ||
+ ((fan->mode == MODE_AUTO) && fan->alarm) ||
+ (fan->speed > fan->limit.rpm.max));
+}
+
+static ssize_t
+show_fan_alarm(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct imanager_hwmon_data *data = imanager_hwmon_update_device(dev);
+ int index = to_sensor_dev_attr(attr)->index;
+ struct hwm_smartfan *fan = &data->hwm.fan[index - 1];
+
+ return sprintf(buf, "%u\n", fan->valid ? is_alarm(fan) : 0);
+}
+
+static ssize_t
+show_fan_min(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct imanager_hwmon_data *data = imanager_hwmon_update_device(dev);
+ int index = to_sensor_dev_attr(attr)->index;
+ struct hwm_fan_limit *rpm = &data->hwm.fan[index - 1].limit.rpm;
+
+ return sprintf(buf, "%u\n", rpm->min);
+}
+
+static ssize_t
+show_fan_max(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct imanager_hwmon_data *data = imanager_hwmon_update_device(dev);
+ int index = to_sensor_dev_attr(attr)->index;
+ struct hwm_fan_limit *rpm = &data->hwm.fan[index - 1].limit.rpm;
+
+ return sprintf(buf, "%u\n", rpm->max);
+}
+
+static ssize_t
+store_fan_min(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct imanager_hwmon_data *data = imanager_hwmon_update_device(dev);
+ int index = to_sensor_dev_attr(attr)->index;
+ struct hwm_smartfan *fan = &data->hwm.fan[index - 1];
+ struct hwm_fan_limit *rpm = &fan->limit.rpm;
+ unsigned long val = 0;
+ int err;
+
+ err = kstrtoul(buf, 10, &val);
+ if (err < 0)
+ return err;
+
+ /* do not apply value if not in 'fan cruise mode' */
+ if (fan->mode != MODE_AUTO)
+ return -EINVAL;
+
+ mutex_lock(&data->idev->lock);
+
+ hwm_core_fan_set_rpm_limit(index - 1, val, rpm->max);
+ hwm_core_fan_get_ctrl(index - 1, fan); /* update */
+
+ mutex_unlock(&data->idev->lock);
+
+ return count;
+}
+
+static ssize_t
+store_fan_max(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct imanager_hwmon_data *data = imanager_hwmon_update_device(dev);
+ int index = to_sensor_dev_attr(attr)->index;
+ struct hwm_smartfan *fan = &data->hwm.fan[index - 1];
+ struct hwm_fan_limit *rpm = &fan->limit.rpm;
+ unsigned long val = 0;
+ int err;
+
+ err = kstrtoul(buf, 10, &val);
+ if (err < 0)
+ return err;
+
+ /* do not apply value if not in 'fan cruise mode' */
+ if (fan->mode != MODE_AUTO)
+ return -EINVAL;
+
+ mutex_lock(&data->idev->lock);
+
+ hwm_core_fan_set_rpm_limit(index - 1, rpm->min, val);
+ hwm_core_fan_get_ctrl(index - 1, fan);
+
+ mutex_unlock(&data->idev->lock);
+
+ return count;
+}
+
+static ssize_t
+show_pwm(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct imanager_hwmon_data *data = imanager_hwmon_update_device(dev);
+ int index = to_sensor_dev_attr(attr)->index;
+ u32 val = DIV_ROUND_CLOSEST(data->hwm.fan[index - 1].pwm * 255, 100);
+
+ return sprintf(buf, "%u\n", val);
+}
+
+static ssize_t
+store_pwm(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct imanager_hwmon_data *data = imanager_hwmon_update_device(dev);
+ int index = to_sensor_dev_attr(attr)->index;
+ struct hwm_smartfan *fan = &data->hwm.fan[index - 1];
+ unsigned long val = 0;
+ int err;
+
+ err = kstrtoul(buf, 10, &val);
+ if (err < 0)
+ return err;
+
+ val = DIV_ROUND_CLOSEST(val * 100, 255);
+
+ mutex_lock(&data->idev->lock);
+
+ switch (fan->mode) {
+ case MODE_MANUAL:
+ hwm_core_fan_set_ctrl(index - 1, MODE_MANUAL, CTRL_PWM,
+ val, 0, NULL, NULL);
+ break;
+ case MODE_AUTO:
+ if (fan->type == CTRL_RPM)
+ break;
+ hwm_core_fan_set_ctrl(index - 1, MODE_AUTO, CTRL_PWM,
+ val, 0, &fan->limit, &fan->alert);
+ break;
+ }
+
+ mutex_unlock(&data->idev->lock);
+
+ return count;
+}
+
+static ssize_t
+show_pwm_min(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct imanager_hwmon_data *data = imanager_hwmon_update_device(dev);
+ int index = to_sensor_dev_attr(attr)->index;
+
+ return sprintf(buf, "%u\n", data->hwm.fan[index - 1].limit.pwm.min);
+}
+
+static ssize_t
+show_pwm_max(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct imanager_hwmon_data *data = imanager_hwmon_update_device(dev);
+ int index = to_sensor_dev_attr(attr)->index;
+
+ return sprintf(buf, "%u\n", data->hwm.fan[index - 1].limit.pwm.max);
+}
+
+static ssize_t
+show_pwm_enable(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct imanager_hwmon_data *data = imanager_hwmon_update_device(dev);
+ int nr = to_sensor_dev_attr(attr)->index - 1;
+ struct hwm_smartfan *fan = &data->hwm.fan[nr];
+
+ if (fan->mode == MODE_OFF)
+ return -EINVAL;
+
+ return sprintf(buf, "%u\n", fan->mode - 1);
+}
+
+static ssize_t
+store_pwm_enable(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct imanager_hwmon_data *data = imanager_hwmon_update_device(dev);
+ int nr = to_sensor_dev_attr(attr)->index - 1;
+ struct hwm_smartfan *fan = &data->hwm.fan[nr];
+ unsigned long mode = 0;
+ int err;
+
+ err = kstrtoul(buf, 10, &mode);
+ if (err < 0)
+ return err;
+
+ if (mode > MODE_AUTO)
+ return -EINVAL;
+
+ mutex_lock(&data->idev->lock);
+
+ switch (mode) {
+ case 0:
+ if (mode != 0)
+ hwm_core_fan_set_ctrl(nr, MODE_FULL, CTRL_PWM, 100,
+ fan->pulse, NULL, NULL);
+ break;
+ case 1:
+ if (mode != 1)
+ hwm_core_fan_set_ctrl(nr, MODE_MANUAL, CTRL_PWM, 0,
+ fan->pulse, NULL, NULL);
+ break;
+ case 2:
+ if (mode != 2)
+ hwm_core_fan_set_ctrl(nr, MODE_AUTO, fan->type, 0,
+ fan->pulse, &fan->limit, NULL);
+ break;
+ }
+
+ mutex_unlock(&data->idev->lock);
+
+ return count;
+}
+
+static ssize_t
+show_pwm_mode(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct imanager_hwmon_data *data = imanager_hwmon_update_device(dev);
+ int index = to_sensor_dev_attr(attr)->index;
+ struct hwm_smartfan *fan = &data->hwm.fan[index - 1];
+
+ if (fan->mode == MODE_OFF)
+ return -EINVAL;
+
+ return sprintf(buf, "%u\n", fan->type == CTRL_PWM ? 1 : 0);
+}
+
+static ssize_t
+store_pwm_mode(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct imanager_hwmon_data *data = imanager_hwmon_update_device(dev);
+ int nr = to_sensor_dev_attr(attr)->index - 1;
+ struct hwm_smartfan *fan = &data->hwm.fan[nr];
+ unsigned long val = 0;
+ int err;
+
+ err = kstrtoul(buf, 10, &val);
+ if (err < 0)
+ return err;
+
+ if (fan->mode != MODE_AUTO)
+ return -EINVAL;
+
+ mutex_lock(&data->idev->lock);
+
+ hwm_core_fan_set_ctrl(nr, fan->mode, val ? CTRL_RPM : CTRL_PWM,
+ fan->pwm, fan->pulse, &fan->limit, &fan->alert);
+
+ mutex_unlock(&data->idev->lock);
+
+ return count;
+}
+
+static ssize_t
+show_temp_min(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct imanager_hwmon_data *data = imanager_hwmon_update_device(dev);
+ int nr = to_sensor_dev_attr(attr)->index - 1;
+ int val = data->hwm.fan[nr].limit.temp.min;
+
+ return sprintf(buf, "%d\n", val * 1000);
+}
+
+static ssize_t
+show_temp_max(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct imanager_hwmon_data *data = imanager_hwmon_update_device(dev);
+ int nr = to_sensor_dev_attr(attr)->index - 1;
+ int val = data->hwm.fan[nr].limit.temp.max;
+
+ return sprintf(buf, "%u\n", val * 1000);
+}
+
+static ssize_t
+show_temp_alarm(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct imanager_hwmon_data *data = imanager_hwmon_update_device(dev);
+ int nr = to_sensor_dev_attr(attr)->index - 1;
+ struct hwm_smartfan *fan = &data->hwm.fan[nr];
+ struct hwm_fan_temp_limit *temp = &fan->limit.temp;
+
+ return sprintf(buf, "%u\n", (fan->temp && (fan->temp >= temp->max)));
+}
+
+static ssize_t
+store_temp_min(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct imanager_hwmon_data *data = imanager_hwmon_update_device(dev);
+ int nr = to_sensor_dev_attr(attr)->index - 1;
+ struct hwm_smartfan *fan = &data->hwm.fan[nr];
+ struct hwm_fan_temp_limit *temp = &fan->limit.temp;
+ long val = 0;
+ int err;
+
+ err = kstrtoul(buf, 10, &val);
+ if (err < 0)
+ return err;
+
+ val = DIV_ROUND_CLOSEST(val, 1000);
+
+ if (val > 100)
+ return -EINVAL;
+
+ /* do not apply value if not in 'fan cruise mode' */
+ if (fan->mode != MODE_AUTO)
+ return -EINVAL;
+
+ /* The EC imanager provides three different temperature limit values
+ * (stop, min, and max) where stop indicates a minimum temp value
+ * (threshold) from which the FAN will turn off. We are setting
+ * temp_stop to the same value as temp_min.
+ */
+
+ mutex_lock(&data->idev->lock);
+
+ hwm_core_fan_set_temp_limit(nr, val, val, temp->max);
+ hwm_core_fan_get_ctrl(nr, fan);
+
+ mutex_unlock(&data->idev->lock);
+
+ return count;
+}
+
+static ssize_t
+store_temp_max(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct imanager_hwmon_data *data = imanager_hwmon_update_device(dev);
+ int nr = to_sensor_dev_attr(attr)->index - 1;
+ struct hwm_smartfan *fan = &data->hwm.fan[nr];
+ struct hwm_fan_temp_limit *temp = &fan->limit.temp;
+ long val = 0;
+ int err;
+
+ err = kstrtoul(buf, 10, &val);
+ if (err < 0)
+ return err;
+
+ val = DIV_ROUND_CLOSEST(val, 1000);
+
+ if (val > 100)
+ return -EINVAL;
+
+ /* do not apply value if not in 'fan cruise mode' */
+ if (fan->mode != MODE_AUTO)
+ return -EINVAL;
+
+ mutex_lock(&data->idev->lock);
+
+ hwm_core_fan_set_temp_limit(nr, temp->stop, temp->min, val);
+ hwm_core_fan_get_ctrl(nr, fan);
+
+ mutex_unlock(&data->idev->lock);
+
+ return count;
+}
+
+static ssize_t
+store_pwm_min(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct imanager_hwmon_data *data = imanager_hwmon_update_device(dev);
+ int index = to_sensor_dev_attr(attr)->index;
+ struct hwm_fan_limit *pwm = &data->hwm.fan[index - 1].limit.pwm;
+ long val = 0;
+ int err;
+
+ err = kstrtoul(buf, 10, &val);
+ if (err < 0)
+ return err;
+
+ val = DIV_ROUND_CLOSEST(val * 100, 255);
+
+ if (val > 100)
+ return -EINVAL;
+
+ mutex_lock(&data->idev->lock);
+
+ hwm_core_fan_set_pwm_limit(index - 1, val, pwm->max);
+
+ mutex_unlock(&data->idev->lock);
+
+ return count;
+}
+
+static ssize_t
+store_pwm_max(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct imanager_hwmon_data *data = imanager_hwmon_update_device(dev);
+ int index = to_sensor_dev_attr(attr)->index;
+ struct hwm_fan_limit *pwm = &data->hwm.fan[index - 1].limit.pwm;
+ long val = 0;
+ int err;
+
+ err = kstrtoul(buf, 10, &val);
+ if (err < 0)
+ return err;
+
+ val = DIV_ROUND_CLOSEST(val * 100, 255);
+
+ if (val > 100)
+ return -EINVAL;
+
+ mutex_lock(&data->idev->lock);
+
+ hwm_core_fan_set_pwm_limit(index - 1, pwm->min, val);
+
+ mutex_unlock(&data->idev->lock);
+
+ return count;
+}
+
+static ssize_t
+show_in_label(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ int index = to_sensor_dev_attr(attr)->index;
+
+ return sprintf(buf, "%s\n", hwm_core_adc_get_label(index));
+}
+
+static ssize_t
+show_temp_label(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ int index = to_sensor_dev_attr(attr)->index;
+
+ return sprintf(buf, "%s\n", hwm_core_fan_get_temp_label(index - 1));
+}
+
+static ssize_t
+show_fan_label(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ int index = to_sensor_dev_attr(attr)->index;
+
+ return sprintf(buf, "%s\n", hwm_core_fan_get_label(index - 1));
+}
+
+/*
+ * Sysfs callback functions
+ */
+
+static SENSOR_DEVICE_ATTR(in0_label, S_IRUGO, show_in_label, NULL, 0);
+static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, show_in, NULL, 0);
+static SENSOR_DEVICE_ATTR(in0_min, S_IWUSR | S_IRUGO, show_in_min,
+ store_in_min, 0);
+static SENSOR_DEVICE_ATTR(in0_max, S_IWUSR | S_IRUGO, show_in_max,
+ store_in_max, 0);
+static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_in_alarm, NULL, 0);
+
+static SENSOR_DEVICE_ATTR(in1_label, S_IRUGO, show_in_label, NULL, 1);
+static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, show_in, NULL, 1);
+static SENSOR_DEVICE_ATTR(in1_min, S_IWUSR | S_IRUGO, show_in_min,
+ store_in_min, 1);
+static SENSOR_DEVICE_ATTR(in1_max, S_IWUSR | S_IRUGO, show_in_max,
+ store_in_max, 1);
+static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_in_alarm, NULL, 1);
+
+static SENSOR_DEVICE_ATTR(in2_label, S_IRUGO, show_in_label, NULL, 2);
+static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, show_in, NULL, 2);
+static SENSOR_DEVICE_ATTR(in2_min, S_IWUSR | S_IRUGO, show_in_min,
+ store_in_min, 2);
+static SENSOR_DEVICE_ATTR(in2_max, S_IWUSR | S_IRUGO, show_in_max,
+ store_in_max, 2);
+static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_in_alarm, NULL, 2);
+
+static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, show_temp_label, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp1_min, S_IRUGO | S_IWUSR, show_temp_min,
+ store_temp_min, 1);
+static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO | S_IWUSR, show_temp_max,
+ store_temp_max, 1);
+static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_temp_alarm, NULL, 1);
+
+static SENSOR_DEVICE_ATTR(temp2_label, S_IRUGO, show_temp_label, NULL, 2);
+static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 2);
+static SENSOR_DEVICE_ATTR(temp2_min, S_IRUGO | S_IWUSR, show_temp_min,
+ store_temp_min, 2);
+static SENSOR_DEVICE_ATTR(temp2_max, S_IRUGO | S_IWUSR, show_temp_max,
+ store_temp_max, 2);
+static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_temp_alarm, NULL, 2);
+
+static SENSOR_DEVICE_ATTR(temp3_label, S_IRUGO, show_temp_label, NULL, 3);
+static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 3);
+static SENSOR_DEVICE_ATTR(temp3_min, S_IRUGO | S_IWUSR, show_temp_min,
+ store_temp_min, 3);
+static SENSOR_DEVICE_ATTR(temp3_max, S_IRUGO | S_IWUSR, show_temp_max,
+ store_temp_max, 3);
+static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_temp_alarm, NULL, 3);
+
+static SENSOR_DEVICE_ATTR(fan1_label, S_IRUGO, show_fan_label, NULL, 1);
+static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan_in, NULL, 1);
+static SENSOR_DEVICE_ATTR(fan1_min, S_IWUSR | S_IRUGO, show_fan_min,
+ store_fan_min, 1);
+static SENSOR_DEVICE_ATTR(fan1_max, S_IWUSR | S_IRUGO, show_fan_max,
+ store_fan_max, 1);
+static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_fan_alarm, NULL, 1);
+
+static SENSOR_DEVICE_ATTR(fan2_label, S_IRUGO, show_fan_label, NULL, 2);
+static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan_in, NULL, 2);
+static SENSOR_DEVICE_ATTR(fan2_min, S_IWUSR | S_IRUGO, show_fan_min,
+ store_fan_min, 2);
+static SENSOR_DEVICE_ATTR(fan2_max, S_IWUSR | S_IRUGO, show_fan_max,
+ store_fan_max, 2);
+static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_fan_alarm, NULL, 2);
+
+static SENSOR_DEVICE_ATTR(fan3_label, S_IRUGO, show_fan_label, NULL, 3);
+static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, show_fan_in, NULL, 3);
+static SENSOR_DEVICE_ATTR(fan3_min, S_IWUSR | S_IRUGO, show_fan_min,
+ store_fan_min, 3);
+static SENSOR_DEVICE_ATTR(fan3_max, S_IWUSR | S_IRUGO, show_fan_max,
+ store_fan_max, 3);
+static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_fan_alarm, NULL, 3);
+
+static SENSOR_DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 1);
+static SENSOR_DEVICE_ATTR(pwm1_min, S_IWUSR | S_IRUGO, show_pwm_min,
+ store_pwm_min, 1);
+static SENSOR_DEVICE_ATTR(pwm1_max, S_IWUSR | S_IRUGO, show_pwm_max,
+ store_pwm_max, 1);
+static SENSOR_DEVICE_ATTR(pwm1_enable, S_IWUSR | S_IRUGO, show_pwm_enable,
+ store_pwm_enable, 1);
+static SENSOR_DEVICE_ATTR(pwm1_mode, S_IWUSR | S_IRUGO, show_pwm_mode,
+ store_pwm_mode, 1);
+
+static SENSOR_DEVICE_ATTR(pwm2, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 2);
+static SENSOR_DEVICE_ATTR(pwm2_min, S_IWUSR | S_IRUGO, show_pwm_min,
+ store_pwm_min, 2);
+static SENSOR_DEVICE_ATTR(pwm2_max, S_IWUSR | S_IRUGO, show_pwm_max,
+ store_pwm_max, 2);
+static SENSOR_DEVICE_ATTR(pwm2_enable, S_IWUSR | S_IRUGO, show_pwm_enable,
+ store_pwm_enable, 2);
+static SENSOR_DEVICE_ATTR(pwm2_mode, S_IWUSR | S_IRUGO, show_pwm_mode,
+ store_pwm_mode, 2);
+
+static SENSOR_DEVICE_ATTR(pwm3, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 3);
+static SENSOR_DEVICE_ATTR(pwm3_min, S_IWUSR | S_IRUGO, show_pwm_min,
+ store_pwm_min, 3);
+static SENSOR_DEVICE_ATTR(pwm3_max, S_IWUSR | S_IRUGO, show_pwm_max,
+ store_pwm_max, 3);
+static SENSOR_DEVICE_ATTR(pwm3_enable, S_IWUSR | S_IRUGO, show_pwm_enable,
+ store_pwm_enable, 3);
+static SENSOR_DEVICE_ATTR(pwm3_mode, S_IWUSR | S_IRUGO, show_pwm_mode,
+ store_pwm_mode, 3);
+
+static SENSOR_DEVICE_ATTR(curr1_input, S_IRUGO, show_in, NULL, 4);
+static SENSOR_DEVICE_ATTR(curr1_min, S_IWUSR | S_IRUGO, show_in_min,
+ store_in_min, 4);
+static SENSOR_DEVICE_ATTR(curr1_max, S_IWUSR | S_IRUGO, show_in_max,
+ store_in_max, 4);
+static SENSOR_DEVICE_ATTR(curr1_alarm, S_IRUGO, show_in_alarm, NULL, 4);
+static SENSOR_DEVICE_ATTR(curr1_average, S_IRUGO, show_in_average, NULL, 4);
+static SENSOR_DEVICE_ATTR(curr1_lowest, S_IRUGO, show_in_lowest, NULL, 4);
+static SENSOR_DEVICE_ATTR(curr1_highest, S_IRUGO, show_in_highest, NULL, 4);
+static SENSOR_DEVICE_ATTR(curr1_reset_history, S_IWUSR, NULL,
+ store_in_reset_history, 4);
+
+static SENSOR_DEVICE_ATTR(cpu0_vid, S_IRUGO, show_in, NULL, 3);
+
+static struct attribute *imanager_in_attributes[] = {
+ &sensor_dev_attr_in0_label.dev_attr.attr,
+ &sensor_dev_attr_in0_input.dev_attr.attr,
+ &sensor_dev_attr_in0_min.dev_attr.attr,
+ &sensor_dev_attr_in0_max.dev_attr.attr,
+ &sensor_dev_attr_in0_alarm.dev_attr.attr,
+
+ &sensor_dev_attr_in1_label.dev_attr.attr,
+ &sensor_dev_attr_in1_input.dev_attr.attr,
+ &sensor_dev_attr_in1_min.dev_attr.attr,
+ &sensor_dev_attr_in1_max.dev_attr.attr,
+ &sensor_dev_attr_in1_alarm.dev_attr.attr,
+
+ &sensor_dev_attr_in2_label.dev_attr.attr,
+ &sensor_dev_attr_in2_input.dev_attr.attr,
+ &sensor_dev_attr_in2_min.dev_attr.attr,
+ &sensor_dev_attr_in2_max.dev_attr.attr,
+ &sensor_dev_attr_in2_alarm.dev_attr.attr,
+
+ NULL
+};
+
+static umode_t
+imanager_in_is_visible(struct kobject *kobj, struct attribute *attr, int index)
+{
+ int max_count = hwm_core_adc_get_max_count();
+
+ if (max_count >= 3)
+ return attr->mode;
+
+ return 0;
+}
+
+static const struct attribute_group imanager_group_in = {
+ .attrs = imanager_in_attributes,
+ .is_visible = imanager_in_is_visible,
+};
+
+static struct attribute *imanager_other_attributes[] = {
+ &sensor_dev_attr_curr1_input.dev_attr.attr,
+ &sensor_dev_attr_curr1_min.dev_attr.attr,
+ &sensor_dev_attr_curr1_max.dev_attr.attr,
+ &sensor_dev_attr_curr1_alarm.dev_attr.attr,
+ &sensor_dev_attr_curr1_average.dev_attr.attr,
+ &sensor_dev_attr_curr1_lowest.dev_attr.attr,
+ &sensor_dev_attr_curr1_highest.dev_attr.attr,
+ &sensor_dev_attr_curr1_reset_history.dev_attr.attr,
+
+ &sensor_dev_attr_cpu0_vid.dev_attr.attr,
+
+ NULL
+};
+
+static umode_t
+imanager_other_is_visible(struct kobject *kobj,
+ struct attribute *attr, int index)
+{
+ int max_count = hwm_core_adc_get_max_count();
+
+ /*
+ * There are either 3 or 5 VINs
+ * vin3 is current monitoring
+ * vin4 is CPU VID
+ */
+ if (max_count > 3)
+ return attr->mode;
+
+ return 0;
+}
+
+static const struct attribute_group imanager_group_other = {
+ .attrs = imanager_other_attributes,
+ .is_visible = imanager_other_is_visible,
+};
+
+static struct attribute *imanager_fan_attributes[] = {
+ &sensor_dev_attr_fan1_label.dev_attr.attr,
+ &sensor_dev_attr_fan1_input.dev_attr.attr,
+ &sensor_dev_attr_fan1_min.dev_attr.attr,
+ &sensor_dev_attr_fan1_max.dev_attr.attr,
+ &sensor_dev_attr_fan1_alarm.dev_attr.attr,
+
+ &sensor_dev_attr_fan2_label.dev_attr.attr,
+ &sensor_dev_attr_fan2_input.dev_attr.attr,
+ &sensor_dev_attr_fan2_min.dev_attr.attr,
+ &sensor_dev_attr_fan2_max.dev_attr.attr,
+ &sensor_dev_attr_fan2_alarm.dev_attr.attr,
+
+ &sensor_dev_attr_fan3_label.dev_attr.attr,
+ &sensor_dev_attr_fan3_input.dev_attr.attr,
+ &sensor_dev_attr_fan3_min.dev_attr.attr,
+ &sensor_dev_attr_fan3_max.dev_attr.attr,
+ &sensor_dev_attr_fan3_alarm.dev_attr.attr,
+
+ &sensor_dev_attr_temp1_label.dev_attr.attr,
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ &sensor_dev_attr_temp1_min.dev_attr.attr,
+ &sensor_dev_attr_temp1_max.dev_attr.attr,
+ &sensor_dev_attr_temp1_alarm.dev_attr.attr,
+
+ &sensor_dev_attr_temp2_label.dev_attr.attr,
+ &sensor_dev_attr_temp2_input.dev_attr.attr,
+ &sensor_dev_attr_temp2_min.dev_attr.attr,
+ &sensor_dev_attr_temp2_max.dev_attr.attr,
+ &sensor_dev_attr_temp2_alarm.dev_attr.attr,
+
+ &sensor_dev_attr_temp3_label.dev_attr.attr,
+ &sensor_dev_attr_temp3_input.dev_attr.attr,
+ &sensor_dev_attr_temp3_min.dev_attr.attr,
+ &sensor_dev_attr_temp3_max.dev_attr.attr,
+ &sensor_dev_attr_temp3_alarm.dev_attr.attr,
+
+ &sensor_dev_attr_pwm1.dev_attr.attr,
+ &sensor_dev_attr_pwm1_min.dev_attr.attr,
+ &sensor_dev_attr_pwm1_max.dev_attr.attr,
+ &sensor_dev_attr_pwm1_enable.dev_attr.attr,
+ &sensor_dev_attr_pwm1_mode.dev_attr.attr,
+
+ &sensor_dev_attr_pwm2.dev_attr.attr,
+ &sensor_dev_attr_pwm2_min.dev_attr.attr,
+ &sensor_dev_attr_pwm2_max.dev_attr.attr,
+ &sensor_dev_attr_pwm2_enable.dev_attr.attr,
+ &sensor_dev_attr_pwm2_mode.dev_attr.attr,
+
+ &sensor_dev_attr_pwm3.dev_attr.attr,
+ &sensor_dev_attr_pwm3_min.dev_attr.attr,
+ &sensor_dev_attr_pwm3_max.dev_attr.attr,
+ &sensor_dev_attr_pwm3_enable.dev_attr.attr,
+ &sensor_dev_attr_pwm3_mode.dev_attr.attr,
+
+ NULL
+};
+
+static umode_t
+imanager_fan_is_visible(struct kobject *kobj, struct attribute *attr, int index)
+{
+ int err;
+
+ if ((index >= 0) && (index <= 14)) { /* fan */
+ err = hwm_core_fan_is_available(index / 5);
+ if (err < 0)
+ return 0;
+ } else if ((index >= 15) && (index <= 29)) { /* temp */
+ err = hwm_core_fan_is_available((index - 15) / 5);
+ if (err < 0)
+ return 0;
+ } else if ((index >= 30) && (index <= 34)) { /* pwm */
+ err = hwm_core_fan_is_available((index - 30) / 5);
+ if (err < 0)
+ return 0;
+ }
+
+ return attr->mode;
+}
+
+static const struct attribute_group imanager_group_fan = {
+ .attrs = imanager_fan_attributes,
+ .is_visible = imanager_fan_is_visible,
+};
+
+/*
+ * Module stuff
+ */
+static int imanager_hwmon_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct imanager_device_data *idev = dev_get_drvdata(dev->parent);
+ struct imanager_hwmon_data *data;
+ struct device *hwmon_dev;
+ int err, i, num_attr_groups = 0;
+
+ if (!idev) {
+ dev_err(dev, "Invalid platform data\n");
+ return -EINVAL;
+ }
+
+ err = hwm_core_init();
+ if (err) {
+ dev_err(dev, "Hwmon core init failed\n");
+ return -EIO;
+ }
+
+ data = devm_kzalloc(dev, sizeof(struct imanager_hwmon_data),
+ GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->idev = idev;
+ platform_set_drvdata(pdev, data);
+
+ data->adc_num = hwm_core_adc_get_max_count();
+ data->fan_num = hwm_core_fan_get_max_count();
+
+ for (i = 0; i < data->fan_num; i++) {
+ /* set active fan to automatic speed control */
+ hwm_core_fan_set_ctrl(i, MODE_AUTO, CTRL_RPM, 0, 0,
+ NULL, NULL);
+ hwm_core_fan_get_ctrl(i, &data->hwm.fan[i]);
+ }
+
+ data->groups[num_attr_groups++] = &imanager_group_in;
+
+ if (data->adc_num > 3)
+ data->groups[num_attr_groups++] = &imanager_group_other;
+
+ if (data->fan_num)
+ data->groups[num_attr_groups++] = &imanager_group_fan;
+
+ hwmon_dev = devm_hwmon_device_register_with_groups(dev,
+ "imanager_hwmon", data, data->groups);
+
+ return PTR_ERR_OR_ZERO(hwmon_dev);
+}
+
+static struct platform_driver imanager_hwmon_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "imanager_hwmon",
+ },
+ .probe = imanager_hwmon_probe,
+};
+
+module_platform_driver(imanager_hwmon_driver);
+
+MODULE_DESCRIPTION("Advantech iManager HWmon Driver");
+MODULE_AUTHOR("Richard Vidal-Dorsch <richard.dorsch at advantech.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:imanager_hwmon");
diff --git a/include/linux/mfd/imanager/hwmon.h b/include/linux/mfd/imanager/hwmon.h
new file mode 100644
index 0000000..77171ac
--- /dev/null
+++ b/include/linux/mfd/imanager/hwmon.h
@@ -0,0 +1,120 @@
+/*
+ * Advantech iManager Hardware Monitoring core
+ *
+ * Copyright (C) 2015 Advantech Co., Ltd., Irvine, CA, USA
+ * Author: Richard Vidal-Dorsch <richard.dorsch@...antech.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __HWMON_H__
+#define __HWMON_H__
+
+#include <linux/types.h>
+
+#define HWM_MAX_ADC 5
+#define HWM_MAX_FAN 3
+
+/* Voltage computation (10-bit ADC, 0..3V input) */
+#define SCALE_IN 2933 /* (3000mV / (2^10 - 1)) * 1000 */
+
+/* Default Voltage Sensors */
+struct hwm_voltage {
+ bool valid; /* if set, below values are valid */
+
+ int value;
+ int min;
+ int max;
+ int average;
+ int lowest;
+ int highest;
+
+};
+
+struct hwm_fan_temp_limit {
+ int stop;
+ int min;
+ int max;
+};
+
+struct hwm_fan_limit {
+ int min;
+ int max;
+};
+
+struct hwm_fan_alert {
+ int min;
+ int max;
+ int min_alarm;
+ int max_alarm;
+};
+
+struct hwm_sensors_limit {
+ struct hwm_fan_temp_limit temp;
+ struct hwm_fan_limit pwm;
+ struct hwm_fan_limit rpm;
+};
+
+struct hwm_smartfan {
+ bool valid; /* if set, below values are valid */
+
+ int mode;
+ int type;
+ int pwm;
+ int speed;
+ int pulse;
+ int alarm;
+ int temp;
+
+ struct hwm_sensors_limit limit;
+ struct hwm_fan_alert alert;
+};
+
+struct hwm_data {
+ struct hwm_voltage volt[HWM_MAX_ADC];
+ struct hwm_smartfan fan[HWM_MAX_FAN];
+};
+
+enum fan_unit {
+ FAN_CPU,
+ FAN_SYS1,
+ FAN_SYS2,
+};
+
+enum fan_ctrl_type {
+ CTRL_PWM,
+ CTRL_RPM,
+};
+
+enum fan_mode {
+ MODE_OFF,
+ MODE_FULL,
+ MODE_MANUAL,
+ MODE_AUTO,
+};
+
+int hwm_core_init(void);
+
+int hwm_core_adc_is_available(int num);
+int hwm_core_adc_get_max_count(void);
+int hwm_core_adc_get_value(int num, struct hwm_voltage *volt);
+const char *hwm_core_adc_get_label(int num);
+
+int hwm_core_fan_is_available(int num);
+int hwm_core_fan_get_max_count(void);
+int hwm_core_fan_get_ctrl(int num, struct hwm_smartfan *fan);
+int hwm_core_fan_set_ctrl(int num, int fmode, int ftype, int pwm, int pulse,
+ struct hwm_sensors_limit *limit,
+ struct hwm_fan_alert *alert);
+
+int hwm_core_fan_set_rpm_limit(int num, int min, int max);
+int hwm_core_fan_set_pwm_limit(int num, int min, int max);
+int hwm_core_fan_set_temp_limit(int num, int stop, int min, int max);
+
+const char *hwm_core_fan_get_label(int num);
+const char *hwm_core_fan_get_temp_label(int num);
+
+#endif
--
2.6.4
Powered by blists - more mailing lists