| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAJKOXPfa0jjRWE6LKvNmwCRcG9Es7=36_03kTqCx-aB1wENx0g@mail.gmail.com>
Date: Fri, 8 Jan 2016 10:35:09 +0900
From: Krzysztof Kozlowski <k.kozlowski@...sung.com>
To: rtc-linux@...glegroups.com
Cc: robh+dt@...nel.org, pawel.moll@....com, mark.rutland@....com,
ijc+devicetree@...lion.org.uk, galak@...eaurora.org,
linus.walleij@...aro.org, gnurou@...il.com, lee.jones@...aro.org,
broonie@...nel.org, a.zummo@...ertech.it,
alexandre.belloni@...e-electrons.com, lgirdwood@...il.com,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-gpio@...r.kernel.org, swarren@...dia.com, treding@...dia.com,
Laxman Dewangan <ldewangan@...dia.com>,
Chaitanya Bandi <bandik@...dia.com>,
Mallikarjun Kasoju <mkasoju@...dia.com>
Subject: Re: [rtc-linux] [PATCH 2/6] mfd: max77620: add core driver for MAX77620/MAX20024
()2016-01-07 23:38 GMT+09:00 Laxman Dewangan <ldewangan@...dia.com>:
> MAX77620/MAX20024 are Power Management IC from the MAXIM.
> It supports RTC, multiple GPIOs, multiple DCDC and LDOs,
> watchdog, clock etc.
>
> Add MFD drier to provides common support for accessing the
> device; additional drivers is developed on respected subsystem
> in order to use the functionality of the device.
>
> Signed-off-by: Laxman Dewangan <ldewangan@...dia.com>
> Signed-off-by: Chaitanya Bandi <bandik@...dia.com>
> Signed-off-by: Mallikarjun Kasoju <mkasoju@...dia.com>
> Tested-by: Venkat Reddy Talla <vreddytalla@...dia.com>
The Testing and Reviewed are statements (see SubmittingPatches) so
they should be made explicitly by people. As this is v1 how they could
make a public statement so far?
> ---
> drivers/mfd/Kconfig | 15 +
> drivers/mfd/Makefile | 1 +
> drivers/mfd/max77620.c | 926 +++++++++++++++++++++++++++++++++++++++++++
> include/linux/mfd/max77620.h | 503 +++++++++++++++++++++++
> 4 files changed, 1445 insertions(+)
> create mode 100644 drivers/mfd/max77620.c
> create mode 100644 include/linux/mfd/max77620.h
>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 9581ebb..edeb85c 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -492,6 +492,21 @@ config MFD_MAX14577
> additional drivers must be enabled in order to use the functionality
> of the device.
>
> +config MFD_MAX77620
> + bool "Maxim Semiconductor MAX77620 and MAX20024 PMIC Support"
> + depends on I2C=y
> + depends on OF
> + select MFD_CORE
> + select REGMAP_I2C
> + select REGMAP_IRQ
> + select IRQ_DOMAIN
> + help
> + Say yes here to add support for Maxim Semiconductor MAX77620 and
> + MAX20024 which are Power Management IC with General purpose pins,
> + RTC, regulators, clock generator, watchdog etc. This driver
> + provides common support for accessing the device; additional drivers
> + must be enabled in order to use the functionality of the device.
> +
> config MFD_MAX77686
> bool "Maxim Semiconductor MAX77686/802 PMIC Support"
> depends on I2C=y
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 0f230a6..97910ed 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -123,6 +123,7 @@ obj-$(CONFIG_MFD_DA9063) += da9063.o
> obj-$(CONFIG_MFD_DA9150) += da9150-core.o
>
> obj-$(CONFIG_MFD_MAX14577) += max14577.o
> +obj-$(CONFIG_MFD_MAX77620) += max77620.o
> obj-$(CONFIG_MFD_MAX77686) += max77686.o
> obj-$(CONFIG_MFD_MAX77693) += max77693.o
> obj-$(CONFIG_MFD_MAX77843) += max77843.o
> diff --git a/drivers/mfd/max77620.c b/drivers/mfd/max77620.c
> new file mode 100644
> index 0000000..5f59279
> --- /dev/null
> +++ b/drivers/mfd/max77620.c
> @@ -0,0 +1,926 @@
> +/*
> + * Maxim MAX77620 MFD Driver
> + *
> + * Copyright (C) 2016 NVIDIA CORPORATION. All rights reserved.
> + *
> + * Author:
> + * Laxman Dewangan <ldewangan@...dia.com>
> + * Chaitanya Bandi <bandik@...dia.com>
> + * Mallikarjun Kasoju <mkasoju@...dia.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + */
> +
> +#include <linux/interrupt.h>
> +#include <linux/i2c.h>
> +#include <linux/slab.h>
> +#include <linux/ratelimit.h>
> +#include <linux/kthread.h>
> +#include <linux/mfd/core.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <linux/delay.h>
> +#include <linux/uaccess.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/of_platform.h>
So many includes. Do you really need ratelimit, kthread, delay,
uaccess, of_platform?
> +
> +#include <linux/mfd/max77620.h>
> +
> +static struct resource gpio_resources[] = {
> + {
> + .start = MAX77620_IRQ_TOP_GPIO,
> + .end = MAX77620_IRQ_TOP_GPIO,
> + .flags = IORESOURCE_IRQ,
> + }
> +};
> +
> +static struct resource rtc_resources[] = {
> + {
> + .start = MAX77620_IRQ_TOP_RTC,
> + .end = MAX77620_IRQ_TOP_RTC,
> + .flags = IORESOURCE_IRQ,
> + }
> +};
> +
> +static struct resource thermal_resources[] = {
> + {
> + .start = MAX77620_IRQ_LBT_TJALRM1,
> + .end = MAX77620_IRQ_LBT_TJALRM1,
> + .flags = IORESOURCE_IRQ,
> + },
> + {
> + .start = MAX77620_IRQ_LBT_TJALRM2,
> + .end = MAX77620_IRQ_LBT_TJALRM2,
> + .flags = IORESOURCE_IRQ,
> + }
> +};
> +
> +static const struct regmap_irq max77620_top_irqs[] = {
> + [MAX77620_IRQ_TOP_GLBL] = {
> + .mask = MAX77620_IRQ_TOP_GLBL_MASK,
> + .reg_offset = 0,
> + },
> + [MAX77620_IRQ_TOP_SD] = {
> + .mask = MAX77620_IRQ_TOP_SD_MASK,
> + .reg_offset = 0,
> + },
> + [MAX77620_IRQ_TOP_LDO] = {
> + .mask = MAX77620_IRQ_TOP_LDO_MASK,
> + .reg_offset = 0,
> + },
> + [MAX77620_IRQ_TOP_GPIO] = {
> + .mask = MAX77620_IRQ_TOP_GPIO_MASK,
> + .reg_offset = 0,
> + },
> + [MAX77620_IRQ_TOP_RTC] = {
> + .mask = MAX77620_IRQ_TOP_RTC_MASK,
> + .reg_offset = 0,
> + },
> + [MAX77620_IRQ_TOP_32K] = {
> + .mask = MAX77620_IRQ_TOP_32K_MASK,
> + .reg_offset = 0,
> + },
> + [MAX77620_IRQ_TOP_ONOFF] = {
> + .mask = MAX77620_IRQ_TOP_ONOFF_MASK,
> + .reg_offset = 0,
> + },
> +
> + [MAX77620_IRQ_LBT_MBATLOW] = {
> + .mask = MAX77620_IRQ_LBM_MASK,
> + .reg_offset = 1,
> + },
> + [MAX77620_IRQ_LBT_TJALRM1] = {
> + .mask = MAX77620_IRQ_TJALRM1_MASK,
> + .reg_offset = 1,
> + },
> + [MAX77620_IRQ_LBT_TJALRM2] = {
> + .mask = MAX77620_IRQ_TJALRM2_MASK,
> + .reg_offset = 1,
> + },
> +
> +};
> +
> +static const char * const max77620_nverc[] = {
> + "Shutdown-pin",
> + "System WatchDog Timer",
> + "Hard Reset",
> + "Junction Temp Overload",
> + "Main-Battery Low",
> + "Main-Battery overvoltage Lockout",
> + "Main-Battery undervoltage Lockout",
> + "Reset input",
> +};
> +
> +enum max77660_ids {
> + MAX77620_PMIC_ID,
> + MAX77620_GPIO_ID,
> + MAX77620_RTC_ID,
> + MAX77620_PINCTRL_ID,
> + MAX77620_CLK_ID,
> + MAX77620_POWER_OFF_ID,
> + MAX77620_WDT_ID,
> + MAX77620_THERMAL_ID,
> +};
> +
> +#define MAX77620_SUB_MODULE_RES(_name, _id) \
> + [MAX77620_##_id##_ID] = { \
> + .name = "max77620-"#_name, \
> + .num_resources = ARRAY_SIZE(_name##_resources), \
> + .resources = &_name##_resources[0], \
> + .id = MAX77620_##_id##_ID, \
> + }
> +
> +#define MAX20024_SUB_MODULE_RES(_name, _id) \
> + [MAX77620_##_id##_ID] = { \
> + .name = "max20024-"#_name, \
> + .num_resources = ARRAY_SIZE(_name##_resources), \
> + .resources = &_name##_resources[0], \
> + .id = MAX77620_##_id##_ID, \
> + }
> +
> +#define MAX77620_SUB_MODULE_NO_RES(_name, _id) \
> + [MAX77620_##_id##_ID] = { \
> + .name = "max77620-"#_name, \
> + .id = MAX77620_##_id##_ID, \
> + }
> +
> +#define MAX20024_SUB_MODULE_NO_RES(_name, _id) \
> + [MAX77620_##_id##_ID] = { \
> + .name = "max20024-"#_name, \
> + .id = MAX77620_##_id##_ID, \
> + }
> +
> +static struct mfd_cell max77620_children[] = {
> + MAX77620_SUB_MODULE_RES(gpio, GPIO),
> + MAX77620_SUB_MODULE_NO_RES(pmic, PMIC),
> + MAX77620_SUB_MODULE_RES(rtc, RTC),
> + MAX77620_SUB_MODULE_NO_RES(pinctrl, PINCTRL),
> + MAX77620_SUB_MODULE_NO_RES(clk, CLK),
> + MAX77620_SUB_MODULE_NO_RES(power-off, POWER_OFF),
> + MAX77620_SUB_MODULE_NO_RES(wdt, WDT),
> + MAX77620_SUB_MODULE_RES(thermal, THERMAL),
> +};
> +
> +static struct mfd_cell max20024_children[] = {
> + MAX20024_SUB_MODULE_RES(gpio, GPIO),
> + MAX20024_SUB_MODULE_NO_RES(pmic, PMIC),
> + MAX20024_SUB_MODULE_RES(rtc, RTC),
> + MAX20024_SUB_MODULE_NO_RES(pinctrl, PINCTRL),
> + MAX20024_SUB_MODULE_NO_RES(clk, CLK),
> + MAX20024_SUB_MODULE_NO_RES(power-off, POWER_OFF),
> + MAX20024_SUB_MODULE_NO_RES(wdt, WDT),
> + MAX20024_SUB_MODULE_RES(thermal, THERMAL),
> +};
> +
> +struct max77620_sub_modules {
> + struct mfd_cell *cells;
> + int ncells;
> + u32 id;
> +};
> +
> +static const struct max77620_sub_modules max77620_cells = {
> + .cells = max77620_children,
> + .ncells = ARRAY_SIZE(max77620_children),
> + .id = MAX77620,
> +};
> +
> +static const struct max77620_sub_modules max20024_cells = {
> + .cells = max20024_children,
> + .ncells = ARRAY_SIZE(max20024_children),
> + .id = MAX20024,
> +};
> +
> +static const struct of_device_id max77620_of_match[] = {
> + {
> + .compatible = "maxim,max77620",
> + .data = &max77620_cells,
> + }, {
> + .compatible = "maxim,max20024",
> + .data = &max20024_cells,
> + }, {
> + },
> +};
> +MODULE_DEVICE_TABLE(of, max77620_of_match);
> +
> +static struct regmap_irq_chip max77620_top_irq_chip = {
> + .name = "max77620-top",
> + .irqs = max77620_top_irqs,
> + .num_irqs = ARRAY_SIZE(max77620_top_irqs),
> + .num_regs = 2,
> + .status_base = MAX77620_REG_IRQTOP,
> + .mask_base = MAX77620_REG_IRQTOPM,
> +};
> +
> +static const struct regmap_range max77620_readable_ranges[] = {
> + regmap_reg_range(MAX77620_REG_CNFGGLBL1, MAX77620_REG_DVSSD4),
> +};
> +
> +static const struct regmap_access_table max77620_readable_table = {
> + .yes_ranges = max77620_readable_ranges,
> + .n_yes_ranges = ARRAY_SIZE(max77620_readable_ranges),
> +};
> +
> +static const struct regmap_range max20024_readable_ranges[] = {
> + regmap_reg_range(MAX77620_REG_CNFGGLBL1, MAX77620_REG_DVSSD4),
> + regmap_reg_range(MAX20024_REG_MAX_ADD, MAX20024_REG_MAX_ADD),
> +};
> +
> +static const struct regmap_access_table max20024_readable_table = {
> + .yes_ranges = max20024_readable_ranges,
> + .n_yes_ranges = ARRAY_SIZE(max20024_readable_ranges),
> +};
> +
> +static const struct regmap_range max77620_writable_ranges[] = {
> + regmap_reg_range(MAX77620_REG_CNFGGLBL1, MAX77620_REG_DVSSD4),
> +};
> +
> +static const struct regmap_access_table max77620_writable_table = {
> + .yes_ranges = max77620_writable_ranges,
> + .n_yes_ranges = ARRAY_SIZE(max77620_writable_ranges),
> +};
> +
> +static const struct regmap_range max77620_cacheable_ranges[] = {
> + regmap_reg_range(MAX77620_REG_SD0_CFG, MAX77620_REG_LDO_CFG3),
> + regmap_reg_range(MAX77620_REG_FPS_CFG0, MAX77620_REG_FPS_SD3),
> +};
> +
> +static const struct regmap_access_table max77620_volatile_table = {
> + .no_ranges = max77620_cacheable_ranges,
> + .n_no_ranges = ARRAY_SIZE(max77620_cacheable_ranges),
> +};
> +
> +static struct regmap_config max77620_regmap_config[] = {
> + [MAX77620_PWR_SLAVE] = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .max_register = MAX77620_REG_DVSSD4 + 1,
> + .cache_type = REGCACHE_RBTREE,
> + .rd_table = &max77620_readable_table,
> + .wr_table = &max77620_writable_table,
> + .volatile_table = &max77620_volatile_table,
> + },
> + [MAX77620_RTC_SLAVE] = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .max_register = 0x1b,
> + },
> +};
> +
> +static int max77620_slave_address[MAX77620_NUM_SLAVES] = {
> + MAX77620_PWR_I2C_ADDR,
> + MAX77620_RTC_I2C_ADDR,
> +};
> +
> +static int max77620_initialise_fps(struct max77620_chip *chip,
> + struct device *dev)
> +{
> + struct device_node *node;
> + struct device_node *child;
> + u32 reg, pval;
> + int ret;
> + int time_period = 40;
> + int input_enable = 2;
> + bool enable_fps = false;
> + unsigned int mask;
> + unsigned int config;
> + int base_fps_time = (chip->id == MAX20024) ? 20 : 40;
> + int i;
That's a lot of variables. I can't find any kind of order they were
put in, they are not groupped by type nor put in the same line. Please
make it simpler.
> +
> + node = of_get_child_by_name(dev->of_node, "fps");
> + if (!node)
> + goto skip_fps;
> +
> + for (reg = 0; reg < 3; ++reg) {
> + chip->active_fps_period[reg] = -1;
> + chip->suspend_fps_period[reg] = -1;
> + }
> +
> + for_each_child_of_node(node, child) {
> + ret = of_property_read_u32(child, "reg", ®);
> + if (ret) {
> + dev_err(dev, "node %s does not have reg property\n",
> + child->name);
> + continue;
> + }
> + if (reg > 2) {
> + dev_err(dev, "FPS%d is not supported\n", reg);
> + continue;
> + }
> +
> + mask = 0;
> + ret = of_property_read_u32(child,
> + "maxim,active-fps-time-period", &pval);
> + if (!ret) {
> + time_period = min(pval, 5120U);
> + mask |= MAX77620_FPS_TIME_PERIOD_MASK;
> + chip->active_fps_period[reg] = time_period;
> + }
> +
> + ret = of_property_read_u32(child,
> + "maxim,suspend-fps-time-period", &pval);
> + if (!ret)
> + chip->suspend_fps_period[reg] = min(pval, 5120U);
> +
> + ret = of_property_read_u32(child, "maxim,fps-enable-input",
> + &pval);
> + if (!ret) {
> + if (pval > 2) {
> + dev_err(dev,
> + "FPS enable-input %u is not supported\n",
> + pval);
Indentation of arguments does not seem equal here or maybe this is
just my email client. Have you run this through checkpatch? And
sparse? And coccicheck (that one definitely not because kbuild is
complaining)?
This is quite big function with 4 levels of indentation + identation
of dev_err() arguments. Maybe split parsing of child nodes to separate
function? Now the code looks quite ugly because of lot of line splits.
> + } else {
> + input_enable = pval;
> + mask |= MAX77620_FPS_EN_SRC_MASK;
> + }
> + }
> +
> + if (input_enable == 2) {
> + enable_fps = of_property_read_bool(child,
> + "maxim,fps-sw-enable");
> + mask |= MAX77620_FPS_ENFPS_MASK;
> + }
> +
> + if (!chip->sleep_enable)
> + chip->sleep_enable = of_property_read_bool(child,
> + "maxim,enable-sleep");
> + if (!chip->enable_global_lpm)
> + chip->enable_global_lpm = of_property_read_bool(child,
> + "maxim,enable-global-lpm");
> +
> + for (i = 0; i < 0x7; ++i) {
> + int x = base_fps_time * BIT(i);
> +
> + if (x >= time_period)
> + break;
> + }
> + config = (i & 0x7) << MAX77620_FPS_TIME_PERIOD_SHIFT;
> + config |= (input_enable & 0x3) << MAX77620_FPS_EN_SRC_SHIFT;
> + if (enable_fps)
> + config |= 1;
> + ret = max77620_reg_update(dev, MAX77620_PWR_SLAVE,
> + MAX77620_REG_FPS_CFG0 + reg, mask, config);
> + if (ret < 0) {
> + dev_err(dev, "Reg 0x%02x write failed: %d\n",
> + MAX77620_REG_FPS_CFG0 + reg, ret);
> + return ret;
> + }
> + }
> +
> + config = chip->enable_global_lpm ? MAX77620_ONOFFCNFG2_SLP_LPM_MSK : 0;
> + ret = max77620_reg_update(chip->dev, MAX77620_PWR_SLAVE,
> + MAX77620_REG_ONOFFCNFG2,
> + MAX77620_ONOFFCNFG2_SLP_LPM_MSK, config);
> + if (ret < 0) {
> + dev_err(dev, "Reg ONOFFCNFG2 update failed: %d\n", ret);
> + return ret;
> + }
> +
> +skip_fps:
> + /* Enable wake on EN0 pin */
> + ret = max77620_reg_update(chip->dev, MAX77620_PWR_SLAVE,
> + MAX77620_REG_ONOFFCNFG2, MAX77620_ONOFFCNFG2_WK_EN0,
> + MAX77620_ONOFFCNFG2_WK_EN0);
> + if (ret < 0) {
> + dev_err(dev, "Reg ONOFFCNFG2 WK_EN0 update failed: %d\n", ret);
> + return ret;
> + }
> +
> + if (!chip->sleep_enable)
> + chip->sleep_enable = of_property_read_bool(dev->of_node,
> + "maxim,enable-sleep");
> +
> + /* For MAX20024, SLPEN will be POR reset if CLRSE is b11 */
> + if ((chip->id == MAX20024) && chip->sleep_enable) {
> + config = MAX77620_ONOFFCNFG1_SLPEN | MAX20024_ONOFFCNFG1_CLRSE;
> + ret = max77620_reg_update(chip->dev, MAX77620_PWR_SLAVE,
> + MAX77620_REG_ONOFFCNFG1, config, config);
> + if (ret < 0) {
> + dev_err(dev, "Reg ONOFFCNFG1 update failed: %d\n", ret);
> + return ret;
> + }
> + }
> + return 0;
Here and in other places: preceed the final return with blank line.
> +}
> +
> +static int max77620_init_backup_battery_charging(struct max77620_chip *chip,
> + struct device *dev)
> +{
> + struct device_node *np;
> + u32 pval;
> + u8 config;
> + int charging_current;
> + int charging_voltage;
> + int resistor;
> + int ret;
Why not all int's in one line?
> +
> + np = of_get_child_by_name(dev->of_node, "backup-battery");
> + if (!np) {
> + dev_info(dev, "Backup battery charging support disabled\n");
> + max77620_reg_update(chip->dev, MAX77620_PWR_SLAVE,
> + MAX77620_REG_CNFGBBC, MAX77620_CNFGBBC_ENABLE, 0);
> + return 0;
> + }
> +
> + ret = of_property_read_u32(np,
> + "maxim,backup-battery-charging-current", &pval);
> + charging_current = (!ret) ? pval : 50;
> +
> + ret = of_property_read_u32(np,
> + "maxim,backup-battery-charging-voltage", &pval);
> + charging_voltage = (!ret) ? pval : 2500000;
> + charging_voltage /= 1000;
> +
> + ret = of_property_read_u32(np,
> + "maxim,backup-battery-output-resister", &pval);
> + resistor = (!ret) ? pval : 1000;
> +
> + config = MAX77620_CNFGBBC_ENABLE;
> + if (charging_current <= 50)
> + config |= 0 << MAX77620_CNFGBBC_CURRENT_SHIFT;
> + else if (charging_current <= 100)
> + config |= 3 << MAX77620_CNFGBBC_CURRENT_SHIFT;
> + else if (charging_current <= 200)
> + config |= 0 << MAX77620_CNFGBBC_CURRENT_SHIFT;
> + else if (charging_current <= 400)
> + config |= 3 << MAX77620_CNFGBBC_CURRENT_SHIFT;
> + else if (charging_current <= 600)
> + config |= 1 << MAX77620_CNFGBBC_CURRENT_SHIFT;
> + else
> + config |= 2 << MAX77620_CNFGBBC_CURRENT_SHIFT;
> +
> + if (charging_current > 100)
> + config |= MAX77620_CNFGBBC_LOW_CURRENT_ENABLE;
> +
> + if (charging_voltage <= 2500)
> + config |= 0 << MAX77620_CNFGBBC_VOLTAGE_SHIFT;
> + else if (charging_voltage <= 3000)
> + config |= 1 << MAX77620_CNFGBBC_VOLTAGE_SHIFT;
> + else if (charging_voltage <= 3300)
> + config |= 2 << MAX77620_CNFGBBC_VOLTAGE_SHIFT;
> + else
> + config |= 3 << MAX77620_CNFGBBC_VOLTAGE_SHIFT;
> +
> + if (resistor <= 100)
> + config |= 0 << MAX77620_CNFGBBC_RESISTOR_SHIFT;
> + else if (resistor <= 1000)
> + config |= 1 << MAX77620_CNFGBBC_RESISTOR_SHIFT;
> + else if (resistor <= 3000)
> + config |= 2 << MAX77620_CNFGBBC_RESISTOR_SHIFT;
> + else if (resistor <= 6000)
> + config |= 3 << MAX77620_CNFGBBC_RESISTOR_SHIFT;
> +
> + ret = max77620_reg_write(dev, MAX77620_PWR_SLAVE,
> + MAX77620_REG_CNFGBBC, config);
> + if (ret < 0) {
> + dev_err(dev, "Reg 0x%02x write failed: %d\n",
> + MAX77620_REG_CNFGBBC, ret);
> + return ret;
> + }
> + return 0;
> +}
> +
> +static int max77620_init_low_battery_monitor(struct max77620_chip *chip,
> + struct device *dev)
> +{
> + struct device_node *np;
> + bool pval;
> + u8 mask = 0;
> + u8 val = 0;
> + int ret;
> +
No need of 2 blank lines. And put any kind of order here. The local
variables are declared in random order. Either use
reversed-christmas-tree or put first non-init and then initialized
vars or any other idea (your choice...).
> +
> + np = of_get_child_by_name(dev->of_node, "low-battery-monitor");
> + if (!np)
> + return 0;
> +
> + pval = of_property_read_bool(np, "maxim,low-battery-dac-enable");
> + if (pval) {
> + mask |= MAX77620_CNFGGLBL1_LBDAC_EN;
> + val |= MAX77620_CNFGGLBL1_LBDAC_EN;
> + }
> + pval = of_property_read_bool(np, "maxim,low-battery-dac-disable");
> + if (pval)
> + mask |= MAX77620_CNFGGLBL1_LBDAC_EN;
> +
> + pval = of_property_read_bool(np, "maxim,low-battery-shutdown-enable");
> + if (pval) {
> + mask |= MAX77620_CNFGGLBL1_MPPLD;
> + val |= MAX77620_CNFGGLBL1_MPPLD;
> + }
> + pval = of_property_read_bool(np, "maxim,low-battery-shutdown-disable");
> + if (pval)
> + mask |= MAX77620_CNFGGLBL1_MPPLD;
> +
> + pval = of_property_read_bool(np, "maxim,low-battery-reset-enable");
> + if (pval) {
> + mask |= MAX77620_CNFGGLBL1_LBRSTEN;
> + val |= MAX77620_CNFGGLBL1_LBRSTEN;
> + }
> + pval = of_property_read_bool(np, "maxim,low-battery-reset-disable");
> + if (pval)
> + mask |= MAX77620_CNFGGLBL1_LBRSTEN;
> +
> + ret = max77620_reg_update(dev, MAX77620_PWR_SLAVE,
> + MAX77620_REG_CNFGGLBL1, mask, val);
> + if (ret < 0) {
> + dev_err(dev, "Reg CNFGGLBL1 update failed: %d\n", ret);
> + return ret;
> + }
> + return 0;
> +}
> +
> +static int max77620_initialise_chip(struct max77620_chip *chip,
> + struct device *dev)
> +{
> + struct device_node *node = dev->of_node;
> + u32 mrt_time = 0;
> + u8 reg_val;
> + int ret;
> +
> + of_property_read_u32(node, "maxim,hard-power-off-time", &mrt_time);
> + if (!mrt_time)
> + return 0;
Different style than in previous of parsing functions. You always used
'ret' to check if property exists. Why style is not consistent?
> +
> + mrt_time = (mrt_time > 12) ? 12 : mrt_time;
> + if (mrt_time <= 6)
> + reg_val = mrt_time - 2;
> + else
> + reg_val = (mrt_time - 6) / 2 + 4;
> +
> + reg_val <<= MAX77620_ONOFFCNFG1_MRT_SHIFT;
> +
> + ret = max77620_reg_update(dev, MAX77620_PWR_SLAVE,
> + MAX77620_REG_ONOFFCNFG1, MAX77620_ONOFFCNFG1_MRT_MASK,
> + reg_val);
> + if (ret < 0)
> + dev_err(dev, "Reg 0x%02x update failed: %d\n",
> + MAX77620_REG_ONOFFCNFG1, reg_val);
> + return ret;
> +}
> +
> +static int max77620_read_es_version(struct max77620_chip *chip)
> +{
> + int ret;
> + u8 val;
> + u8 cid;
> + int i;
> + u8 cid_val[6];
> +
> + for (i = MAX77620_REG_CID0; i <= MAX77620_REG_CID5; ++i) {
> + ret = max77620_reg_read(chip->dev, MAX77620_PWR_SLAVE,
> + i, &cid);
> + if (ret < 0) {
> + dev_err(chip->dev, "CID%d register read failed: %d\n",
> + i - MAX77620_REG_CID0, ret);
> + return ret;
> + }
> + dev_info(chip->dev, "CID%d: 0x%02x\n",
> + i - MAX77620_REG_CID0, cid);
> + cid_val[i - MAX77620_REG_CID0] = cid;
> + }
> +
> + /* CID4 is OTP Version */
> + dev_info(chip->dev, "MAX77620 PMIC OTP Version: 0x%02X\n", cid_val[4]);
> +
> + /* CID5 is ES version */
> + chip->es_minor_version = MAX77620_CID5_DIDM(cid_val[5]);
> + chip->es_major_version = 1;
> + dev_info(chip->dev, "MAX77620 PMIC ES version: %d.%d\n",
> + chip->es_major_version, chip->es_minor_version);
> +
> + /* Read NVERC register */
> + ret = max77620_reg_read(chip->dev, MAX77620_PWR_SLAVE,
> + MAX77620_REG_NVERC, &val);
> + if (ret < 0) {
> + dev_err(chip->dev, "NVERC read failed: %d\n", ret);
> + return ret;
> + }
> + dev_info(chip->dev, "NVERC = 0x%02x\n", val);
> + for (i = 0; i < 8; ++i) {
> + if (val & BIT(i))
> + dev_info(chip->dev, "NVERC: %s\n", max77620_nverc[i]);
> + }
So many dev_info() for one driver. One is sufficient. Rest should be dev_dbg().
> + return ret;
> +}
> +
> +static irqreturn_t max77620_mbattlow_irq(int irq, void *data)
> +{
> + struct max77620_chip *max77620 = data;
> +
> + dev_info(max77620->dev, "MBATTLOW interrupt occurred\n");
Not a dev_info(). You are not doing with the interrupt anyway so this
does not look important. If it were important than I would suspect
something like power_supply_changed() to notify userspace etc.
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int max77620_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct device_node *node = client->dev.of_node;
> + const struct max77620_sub_modules *children;
> + struct max77620_chip *chip;
> + int i = 0;
> + int ret = 0;
> + const struct of_device_id *match;
> +
> + if (!node) {
> + dev_err(&client->dev, "Device is not from DT\n");
> + return -ENODEV;
> + }
> +
> + match = of_match_device(max77620_of_match, &client->dev);
> + children = match->data;
> + if (!children)
> + return -ENODEV;
> +
> + chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
> + if (!chip)
> + return -ENOMEM;
> +
> + i2c_set_clientdata(client, chip);
> + chip->dev = &client->dev;
> + chip->irq_base = -1;
> + chip->chip_irq = client->irq;
> + chip->id = children->id;
> +
> + if (chip->id == MAX20024) {
> + max77620_regmap_config[MAX77620_PWR_SLAVE].rd_table =
> + &max20024_readable_table;
> + max77620_regmap_config[MAX77620_PWR_SLAVE].max_register =
> + MAX20024_REG_MAX_ADD + 1;
> + }
> +
> + mutex_init(&chip->mutex_config);
> +
> + for (i = 0; i < MAX77620_NUM_SLAVES; i++) {
> + if (max77620_slave_address[i] == client->addr)
> + chip->clients[i] = client;
> + else
> + chip->clients[i] = i2c_new_dummy(client->adapter,
> + max77620_slave_address[i]);
> + if (!chip->clients[i]) {
> + dev_err(&client->dev, "can't attach client %d\n", i);
> + ret = -ENOMEM;
> + goto fail_client_reg;
> + }
> +
> + chip->clients[i]->dev.of_node = node;
> + i2c_set_clientdata(chip->clients[i], chip);
> + max77620_regmap_config[i].lock_arg = chip;
> + chip->rmap[i] = devm_regmap_init_i2c(chip->clients[i],
> + (const struct regmap_config *)&max77620_regmap_config[i]);
Indentation looks weird here (or again this is my email client...).
The cast is even weirder?!? Why casting?
> + if (IS_ERR(chip->rmap[i])) {
> + ret = PTR_ERR(chip->rmap[i]);
> + dev_err(&client->dev,
> + "regmap %d init failed, err %d\n", i, ret);
> + goto fail_client_reg;
> + }
> + }
> +
> + ret = max77620_read_es_version(chip);
> + if (ret < 0) {
> + dev_err(chip->dev, "Chip revision init failed: %d\n", ret);
Here and in other places you will have always two error messages
printed for the same error (the same cause, trackable to the same
path). One error message coming from max77620_read_es_version() and
second here. No need. Just print error once.
> + goto fail_client_reg;
> + }
> +
> + ret = max77620_initialise_chip(chip, &client->dev);
> + if (ret < 0) {
> + dev_err(&client->dev, "Chip initialisation failed: %d\n", ret);
> + goto fail_client_reg;
> + }
> +
> + ret = regmap_add_irq_chip(chip->rmap[MAX77620_PWR_SLAVE],
> + chip->chip_irq, IRQF_ONESHOT | IRQF_SHARED, chip->irq_base,
> + &max77620_top_irq_chip, &chip->top_irq_data);
> + if (ret < 0) {
> + dev_err(chip->dev, "Failed to add top irq_chip %d\n", ret);
> + goto fail_client_reg;
> + }
> +
> + ret = max77620_initialise_fps(chip, &client->dev);
> + if (ret < 0) {
> + dev_err(&client->dev, "FPS initialisation failed: %d\n", ret);
> + goto fail_free_irq;
> + }
> +
> + ret = max77620_init_backup_battery_charging(chip, &client->dev);
> + if (ret < 0) {
> + dev_err(&client->dev,
> + "Backup battery charging init failed: %d\n", ret);
> + goto fail_free_irq;
> + }
> +
> + ret = max77620_init_low_battery_monitor(chip, &client->dev);
> + if (ret < 0) {
> + dev_err(&client->dev, "Low battery monitor init failed: %d\n",
> + ret);
> + goto fail_free_irq;
> + }
> +
> + ret = mfd_add_devices(&client->dev, -1, children->cells,
> + children->ncells, NULL, 0,
> + regmap_irq_get_domain(chip->top_irq_data));
> + if (ret < 0) {
> + dev_err(&client->dev, "mfd add dev fail %d\n", ret);
> + goto fail_free_irq;
> + }
> +
> + chip->irq_mbattlow = max77620_irq_get_virq(chip->dev,
> + MAX77620_IRQ_LBT_MBATLOW);
> + if (chip->irq_mbattlow) {
> + ret = devm_request_threaded_irq(chip->dev, chip->irq_mbattlow,
> + NULL, max77620_mbattlow_irq,
> + IRQF_ONESHOT, dev_name(chip->dev),
> + chip);
> + if (ret < 0)
> + dev_err(&client->dev, "request irq %d failed: %d\n",
> + chip->irq_mbattlow, ret);
> + }
> +
> + dev_info(&client->dev, "max77620 probe successfully\n");
Not only you are printing a lot of dev_info() for device ID and now
success of probing. Not even dev_dbg(). Don't polute dmesg.
> + return 0;
> +
> +fail_free_irq:
> + regmap_del_irq_chip(chip->chip_irq, chip->top_irq_data);
> +
> +fail_client_reg:
> + for (i = 0; i < MAX77620_NUM_SLAVES; i++) {
> + if (!chip->clients[i] || chip->clients[i] == client)
> + continue;
> + i2c_unregister_device(chip->clients[i]);
> + }
> + return ret;
> +}
> +
> +static int max77620_remove(struct i2c_client *client)
> +{
> +
> + struct max77620_chip *chip = i2c_get_clientdata(client);
> + int i;
> +
> + mfd_remove_devices(chip->dev);
> + regmap_del_irq_chip(chip->chip_irq, chip->top_irq_data);
> +
> + for (i = 0; i < MAX77620_NUM_SLAVES; i++) {
> + if (chip->clients[i] != client)
> + i2c_unregister_device(chip->clients[i]);
> + }
> +
> + return 0;
> +}
> +
> +#ifdef CONFIG_PM_SLEEP
> +static int max77620_set_fps_period(struct max77620_chip *chip,
> + int fps_id, int time_period)
Indentation looks wrong.
> +{
> + unsigned int config;
> + struct device *dev = chip->dev;
> + int base_fps_time = (chip->id == MAX20024) ? 20 : 40;
> + int ret;
> + int i;
> +
> + for (i = 0; i < 0x7; ++i) {
> + int x = base_fps_time * BIT(i);
> +
> + if (x >= time_period)
> + break;
> + }
> + config = (i & 0x7) << MAX77620_FPS_TIME_PERIOD_SHIFT;
> + ret = max77620_reg_update(dev, MAX77620_PWR_SLAVE,
> + MAX77620_REG_FPS_CFG0 + fps_id,
> + MAX77620_FPS_TIME_PERIOD_MASK, config);
> + if (ret < 0) {
> + dev_err(dev, "Reg 0x%02x write failed: %d\n",
> + MAX77620_REG_FPS_CFG0 + fps_id, ret);
> + return ret;
> + }
> + return 0;
> +}
> +
> +static int max77620_i2c_suspend(struct device *dev)
> +{
> + struct max77620_chip *chip = dev_get_drvdata(dev);
> + unsigned int config;
> + int fps;
> + int ret;
> +
> + for (fps = 0; fps < 2; ++fps) {
> + if (chip->suspend_fps_period[fps] < 0)
> + continue;
> +
> + ret = max77620_set_fps_period(chip, fps,
> + chip->suspend_fps_period[fps]);
> + if (ret < 0)
> + dev_err(dev, "FPS%d config failed: %d\n", fps, ret);
> + }
> +
> + /*
> + * For MAX20024: No need to configure SLPEN on suspend as
> + * it will be configured on Init.
> + */
> + if (chip->id == MAX20024)
> + return 0;
> +
> + config = (chip->sleep_enable) ? MAX77620_ONOFFCNFG1_SLPEN : 0;
> + ret = max77620_reg_update(chip->dev, MAX77620_PWR_SLAVE,
> + MAX77620_REG_ONOFFCNFG1, MAX77620_ONOFFCNFG1_SLPEN,
> + config);
> + if (ret < 0)
> + dev_err(dev, "Reg ONOFFCNFG1 update failed: %d\n", ret);
> +
> + /* Disable WK_EN0 */
> + ret = max77620_reg_update(chip->dev, MAX77620_PWR_SLAVE,
> + MAX77620_REG_ONOFFCNFG2, MAX77620_ONOFFCNFG2_WK_EN0, 0);
> + if (ret < 0) {
> + dev_err(dev, "Reg ONOFFCNFG2 WK_EN0 update failed: %d\n", ret);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int max77620_i2c_resume(struct device *dev)
> +{
> + struct max77620_chip *chip = dev_get_drvdata(dev);
> + int ret;
> + int fps;
> +
> + for (fps = 0; fps < 2; ++fps) {
> + if (chip->active_fps_period[fps] < 0)
> + continue;
> +
> + ret = max77620_set_fps_period(chip, fps,
> + chip->active_fps_period[fps]);
> + if (ret < 0)
> + dev_err(dev, "FPS%d config failed: %d\n", fps, ret);
> + }
> +
> + /*
> + * For MAX20024: No need to configure WKEN0 on resume as
> + * it is configured on Init.
> + */
> + if (chip->id == MAX20024)
> + return 0;
> +
> + /* Enable WK_EN0 */
> + ret = max77620_reg_update(chip->dev, MAX77620_PWR_SLAVE,
> + MAX77620_REG_ONOFFCNFG2, MAX77620_ONOFFCNFG2_WK_EN0,
> + MAX77620_ONOFFCNFG2_WK_EN0);
> + if (ret < 0) {
> + dev_err(dev, "Reg ONOFFCNFG2 WK_EN0 update failed: %d\n", ret);
> + return ret;
> + }
> +
> + return 0;
> +}
> +#endif
> +
> +static const struct i2c_device_id max77620_id[] = {
> + {"max77620", 0},
> + {"max20024", 1},
I suppose the 0/1 should be proper device types (defines, enums etc).
> + {},
> +};
> +MODULE_DEVICE_TABLE(i2c, max77620_id);
> +
> +static const struct dev_pm_ops max77620_pm_ops = {
> + SET_SYSTEM_SLEEP_PM_OPS(max77620_i2c_suspend, max77620_i2c_resume)
> +};
> +
> +static struct i2c_driver max77620_driver = {
> + .driver = {
> + .name = "max77620",
> + .owner = THIS_MODULE,
Did you run coccicheck on this?
> + .pm = &max77620_pm_ops,
> + .of_match_table = max77620_of_match,
> + },
> + .probe = max77620_probe,
> + .remove = max77620_remove,
> + .id_table = max77620_id,
> +};
> +
> +static int __init max77620_init(void)
> +{
> + return i2c_add_driver(&max77620_driver);
> +}
> +subsys_initcall(max77620_init);
> +
> +static void __exit max77620_exit(void)
> +{
> + i2c_del_driver(&max77620_driver);
> +}
> +module_exit(max77620_exit);
> +
> +MODULE_DESCRIPTION("MAX77620/MAX20024 Multi Function Device Core Driver");
> +MODULE_AUTHOR("Laxman Dewangan <ldewangan@...dia.com>");
> +MODULE_AUTHOR("Chaitanya Bandi <bandik@...dia.com>");
> +MODULE_AUTHOR("Mallikarjun Kasoju <mkasoju@...dia.com>");
> +MODULE_ALIAS("i2c:max77620");
> +MODULE_LICENSE("GPL v2");
> diff --git a/include/linux/mfd/max77620.h b/include/linux/mfd/max77620.h
> new file mode 100644
> index 0000000..9d712b2
> --- /dev/null
> +++ b/include/linux/mfd/max77620.h
> @@ -0,0 +1,503 @@
> +/*
> + * max77620.h: Defining registers address and its bit definitions
> + * of MAX77620 and MAX20024
> + *
> + * Copyright (C) 2016 NVIDIA CORPORATION. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + */
> +
> +#ifndef _LINUX_MFD_MAX77620_H_
> +#define _LINUX_MFD_MAX77620_H_
> +
> +#include <linux/irq.h>
This include looks unused.
> +#include <linux/i2c.h>
> +#include <linux/mfd/core.h>
> +#include <linux/regmap.h>
> +#include <linux/regulator/machine.h>
> +#include <linux/mutex.h>
> +
> +/* RTC Registers */
> +#define MAX77620_REG_RTCINT 0x00
> +#define MAX77620_REG_RTCINTM 0x01
> +#define MAX77620_REG_RTCCNTLM 0x02
> +#define MAX77620_REG_RTCCNTL 0x03
> +#define MAX77620_REG_RTCUPDATE0 0x04
> +#define MAX77620_REG_RTCUPDATE1 0x05
> +#define MAX77620_REG_RTCSMPL 0x06
> +#define MAX77620_REG_RTCSEC 0x07
> +#define MAX77620_REG_RTCMIN 0x08
> +#define MAX77620_REG_RTCHOUR 0x09
> +#define MAX77620_REG_RTCDOW 0x0A
> +#define MAX77620_REG_RTCMONTH 0x0B
> +#define MAX77620_REG_RTCYEAR 0x0C
> +#define MAX77620_REG_RTCDOM 0x0D
> +#define MAX77620_REG_RTCSECA1 0x0E
> +#define MAX77620_REG_RTCMINA1 0x0F
> +#define MAX77620_REG_RTCHOURA1 0x10
> +#define MAX77620_REG_RTCDOWA1 0x11
> +#define MAX77620_REG_RTCMONTHA1 0x12
> +#define MAX77620_REG_RTCYEARA1 0x13
> +#define MAX77620_REG_RTCDOMA1 0x14
> +#define MAX77620_REG_RTCSECA2 0x15
> +#define MAX77620_REG_RTCMINA2 0x16
> +#define MAX77620_REG_RTCHOURA2 0x17
> +#define MAX77620_REG_RTCDOWA2 0x18
> +#define MAX77620_REG_RTCMONTHA2 0x19
> +#define MAX77620_REG_RTCYEARA2 0x1A
> +#define MAX77620_REG_RTCDOMA2 0x1B
> +
> +/* GLOBAL, PMIC, GPIO, FPS, ONOFFC, CID Registers */
> +#define MAX77620_REG_CNFGGLBL1 0x00
> +#define MAX77620_REG_CNFGGLBL2 0x01
> +#define MAX77620_REG_CNFGGLBL3 0x02
> +#define MAX77620_REG_CNFG1_32K 0x03
> +#define MAX77620_REG_CNFGBBC 0x04
> +#define MAX77620_REG_IRQTOP 0x05
> +#define MAX77620_REG_INTLBT 0x06
> +#define MAX77620_REG_IRQSD 0x07
> +#define MAX77620_REG_IRQ_LVL2_L0_7 0x08
> +#define MAX77620_REG_IRQ_LVL2_L8 0x09
> +#define MAX77620_REG_IRQ_LVL2_GPIO 0x0A
> +#define MAX77620_REG_ONOFFIRQ 0x0B
> +#define MAX77620_REG_NVERC 0x0C
> +#define MAX77620_REG_IRQTOPM 0x0D
> +#define MAX77620_REG_INTENLBT 0x0E
> +#define MAX77620_REG_IRQMASKSD 0x0F
> +#define MAX77620_REG_IRQ_MSK_L0_7 0x10
> +#define MAX77620_REG_IRQ_MSK_L8 0x11
> +#define MAX77620_REG_ONOFFIRQM 0x12
> +#define MAX77620_REG_STATLBT 0x13
> +#define MAX77620_REG_STATSD 0x14
> +#define MAX77620_REG_ONOFFSTAT 0x15
> +
> +/* SD and LDO Registers */
> +#define MAX77620_REG_SD0 0x16
> +#define MAX77620_REG_SD1 0x17
> +#define MAX77620_REG_SD2 0x18
> +#define MAX77620_REG_SD3 0x19
> +#define MAX77620_REG_SD4 0x1A
> +#define MAX77620_REG_DVSSD0 0x1B
> +#define MAX77620_REG_DVSSD1 0x1C
> +#define MAX77620_REG_SD0_CFG 0x1D
> +#define MAX77620_REG_SD1_CFG 0x1E
> +#define MAX77620_REG_SD2_CFG 0x1F
> +#define MAX77620_REG_SD3_CFG 0x20
> +#define MAX77620_REG_SD4_CFG 0x21
> +#define MAX77620_REG_SD_CFG2 0x22
> +#define MAX77620_REG_LDO0_CFG 0x23
> +#define MAX77620_REG_LDO0_CFG2 0x24
> +#define MAX77620_REG_LDO1_CFG 0x25
> +#define MAX77620_REG_LDO1_CFG2 0x26
> +#define MAX77620_REG_LDO2_CFG 0x27
> +#define MAX77620_REG_LDO2_CFG2 0x28
> +#define MAX77620_REG_LDO3_CFG 0x29
> +#define MAX77620_REG_LDO3_CFG2 0x2A
> +#define MAX77620_REG_LDO4_CFG 0x2B
> +#define MAX77620_REG_LDO4_CFG2 0x2C
> +#define MAX77620_REG_LDO5_CFG 0x2D
> +#define MAX77620_REG_LDO5_CFG2 0x2E
> +#define MAX77620_REG_LDO6_CFG 0x2F
> +#define MAX77620_REG_LDO6_CFG2 0x30
> +#define MAX77620_REG_LDO7_CFG 0x31
> +#define MAX77620_REG_LDO7_CFG2 0x32
> +#define MAX77620_REG_LDO8_CFG 0x33
> +#define MAX77620_REG_LDO8_CFG2 0x34
> +#define MAX77620_REG_LDO_CFG3 0x35
> +
> +#define MAX77620_LDO_SLEW_RATE_MASK 0x1
> +
> +/* LDO Configuration 3 */
> +#define MAX77620_TRACK4_MASK BIT(5)
> +#define MAX77620_TRACK4_SHIFT 5
> +
> +/* Voltage */
> +#define MAX77620_SDX_VOLT_MASK 0xFF
> +#define MAX77620_SD0_VOLT_MASK 0x3F
> +#define MAX77620_SD1_VOLT_MASK 0x7F
> +#define MAX77620_LDO_VOLT_MASK 0x3F
> +
> +#define MAX77620_REG_GPIO0 0x36
> +#define MAX77620_REG_GPIO1 0x37
> +#define MAX77620_REG_GPIO2 0x38
> +#define MAX77620_REG_GPIO3 0x39
> +#define MAX77620_REG_GPIO4 0x3A
> +#define MAX77620_REG_GPIO5 0x3B
> +#define MAX77620_REG_GPIO6 0x3C
> +#define MAX77620_REG_GPIO7 0x3D
> +#define MAX77620_REG_PUE_GPIO 0x3E
> +#define MAX77620_REG_PDE_GPIO 0x3F
> +#define MAX77620_REG_AME_GPIO 0x40
> +#define MAX77620_REG_ONOFFCNFG1 0x41
> +#define MAX77620_REG_ONOFFCNFG2 0x42
> +
> +/* FPS Registers */
> +#define MAX77620_REG_FPS_CFG0 0x43
> +#define MAX77620_REG_FPS_CFG1 0x44
> +#define MAX77620_REG_FPS_CFG2 0x45
> +#define MAX77620_REG_FPS_LDO0 0x46
> +#define MAX77620_REG_FPS_LDO1 0x47
> +#define MAX77620_REG_FPS_LDO2 0x48
> +#define MAX77620_REG_FPS_LDO3 0x49
> +#define MAX77620_REG_FPS_LDO4 0x4A
> +#define MAX77620_REG_FPS_LDO5 0x4B
> +#define MAX77620_REG_FPS_LDO6 0x4C
> +#define MAX77620_REG_FPS_LDO7 0x4D
> +#define MAX77620_REG_FPS_LDO8 0x4E
> +#define MAX77620_REG_FPS_SD0 0x4F
> +#define MAX77620_REG_FPS_SD1 0x50
> +#define MAX77620_REG_FPS_SD2 0x51
> +#define MAX77620_REG_FPS_SD3 0x52
> +#define MAX77620_REG_FPS_SD4 0x53
> +#define MAX77620_REG_FPS_NONE 0
> +
> +#define MAX77620_FPS_SRC_MASK 0xC0
> +#define MAX77620_FPS_SRC_SHIFT 6
> +#define MAX77620_FPS_PU_PERIOD_MASK 0x38
> +#define MAX77620_FPS_PU_PERIOD_SHIFT 3
> +#define MAX77620_FPS_PD_PERIOD_MASK 0x07
> +#define MAX77620_FPS_PD_PERIOD_SHIFT 0
> +#define MAX77620_FPS_TIME_PERIOD_MASK 0x38
> +#define MAX77620_FPS_TIME_PERIOD_SHIFT 3
> +#define MAX77620_FPS_EN_SRC_MASK 0x06
> +#define MAX77620_FPS_EN_SRC_SHIFT 1
> +#define MAX77620_FPS_ENFPS_MASK 0x01
> +
> +#define MAX77620_REG_FPS_GPIO1 0x54
> +#define MAX77620_REG_FPS_GPIO2 0x55
> +#define MAX77620_REG_FPS_GPIO3 0x56
> +#define MAX77620_REG_FPS_RSO 0x57
> +#define MAX77620_REG_CID0 0x58
> +#define MAX77620_REG_CID1 0x59
> +#define MAX77620_REG_CID2 0x5A
> +#define MAX77620_REG_CID3 0x5B
> +#define MAX77620_REG_CID4 0x5C
> +#define MAX77620_REG_CID5 0x5D
> +
> +#define MAX77620_REG_DVSSD4 0x5E
> +#define MAX20024_REG_MAX_ADD 0x70
> +
> +#define MAX77620_CID_DIDM_MASK 0xF0
> +#define MAX77620_CID_DIDM_SHIFT 4
> +
> +/* CNCG2SD */
> +#define MAX77620_SD_CNF2_ROVS_EN_SD1 BIT(1)
> +#define MAX77620_SD_CNF2_ROVS_EN_SD0 BIT(2)
> +
> +/* Device Identification Metal */
> +#define MAX77620_CID5_DIDM(n) (((n) >> 4) & 0xF)
> +/* Device Indentification OTP */
> +#define MAX77620_CID5_DIDO(n) ((n) & 0xF)
> +
> +/* SD CNFG1 */
> +#define MAX77620_SD_SR_MASK 0xC0
> +#define MAX77620_SD_SR_SHIFT 6
> +#define MAX77620_SD_POWER_MODE_MASK 0x30
> +#define MAX77620_SD_POWER_MODE_SHIFT 4
> +#define MAX77620_SD_CFG1_ADE_MASK BIT(3)
> +#define MAX77620_SD_CFG1_ADE_DISABLE 0
> +#define MAX77620_SD_CFG1_ADE_ENABLE BIT(3)
> +#define MAX77620_SD_FPWM_MASK 0x04
> +#define MAX77620_SD_FPWM_SHIFT 2
> +#define MAX77620_SD_FSRADE_MASK 0x01
> +#define MAX77620_SD_FSRADE_SHIFT 0
> +#define MAX77620_SD_CFG1_FPWM_SD_MASK BIT(2)
> +#define MAX77620_SD_CFG1_FPWM_SD_SKIP 0
> +#define MAX77620_SD_CFG1_FPWM_SD_FPWM BIT(2)
> +#define MAX77620_SD_CFG1_FSRADE_SD_MASK BIT(0)
> +#define MAX77620_SD_CFG1_FSRADE_SD_DISABLE 0
> +#define MAX77620_SD_CFG1_FSRADE_SD_ENABLE BIT(0)
> +
> +/* LDO_CNFG2 */
> +#define MAX77620_LDO_POWER_MODE_MASK 0xC0
> +#define MAX77620_LDO_POWER_MODE_SHIFT 6
> +#define MAX77620_LDO_CFG2_ADE_MASK BIT(1)
> +#define MAX77620_LDO_CFG2_ADE_DISABLE 0
> +#define MAX77620_LDO_CFG2_ADE_ENABLE BIT(1)
> +#define MAX77620_LDO_CFG2_SS_MASK BIT(0)
> +#define MAX77620_LDO_CFG2_SS_FAST BIT(0)
> +#define MAX77620_LDO_CFG2_SS_SLOW 0
> +
> +#define MAX77620_IRQ_TOP_GLBL_MASK BIT(7)
> +#define MAX77620_IRQ_TOP_SD_MASK BIT(6)
> +#define MAX77620_IRQ_TOP_LDO_MASK BIT(5)
> +#define MAX77620_IRQ_TOP_GPIO_MASK BIT(4)
> +#define MAX77620_IRQ_TOP_RTC_MASK BIT(3)
> +#define MAX77620_IRQ_TOP_32K_MASK BIT(2)
> +#define MAX77620_IRQ_TOP_ONOFF_MASK BIT(1)
> +
> +#define MAX77620_IRQ_LBM_MASK BIT(3)
> +#define MAX77620_IRQ_TJALRM1_MASK BIT(2)
> +#define MAX77620_IRQ_TJALRM2_MASK BIT(1)
> +
> +#define MAX77620_PWR_I2C_ADDR 0x3c
> +#define MAX77620_RTC_I2C_ADDR 0x68
> +
> +#define MAX77620_CNFG_GPIO_DRV_MASK BIT(0)
> +#define MAX77620_CNFG_GPIO_DRV_PUSHPULL BIT(0)
> +#define MAX77620_CNFG_GPIO_DRV_OPENDRAIN 0
> +#define MAX77620_CNFG_GPIO_DIR_MASK BIT(1)
> +#define MAX77620_CNFG_GPIO_DIR_INPUT BIT(1)
> +#define MAX77620_CNFG_GPIO_DIR_OUTPUT 0
> +#define MAX77620_CNFG_GPIO_INPUT_VAL_MASK BIT(2)
> +#define MAX77620_CNFG_GPIO_OUTPUT_VAL_MASK BIT(3)
> +#define MAX77620_CNFG_GPIO_OUTPUT_VAL_HIGH BIT(3)
> +#define MAX77620_CNFG_GPIO_OUTPUT_VAL_LOW 0
> +#define MAX77620_CNFG_GPIO_INT_MASK (0x3 << 4)
> +#define MAX77620_CNFG_GPIO_INT_FALLING BIT(4)
> +#define MAX77620_CNFG_GPIO_INT_RISING BIT(5)
> +#define MAX77620_CNFG_GPIO_DBNC_MASK (0x3 << 6)
> +#define MAX77620_CNFG_GPIO_DBNC_None (0x0 << 6)
> +#define MAX77620_CNFG_GPIO_DBNC_8ms (0x1 << 6)
> +#define MAX77620_CNFG_GPIO_DBNC_16ms (0x2 << 6)
> +#define MAX77620_CNFG_GPIO_DBNC_32ms (0x3 << 6)
> +
> +#define MAX77620_IRQ_LVL2_GPIO_EDGE0 BIT(0)
> +#define MAX77620_IRQ_LVL2_GPIO_EDGE1 BIT(1)
> +#define MAX77620_IRQ_LVL2_GPIO_EDGE2 BIT(2)
> +#define MAX77620_IRQ_LVL2_GPIO_EDGE3 BIT(3)
> +#define MAX77620_IRQ_LVL2_GPIO_EDGE4 BIT(4)
> +#define MAX77620_IRQ_LVL2_GPIO_EDGE5 BIT(5)
> +#define MAX77620_IRQ_LVL2_GPIO_EDGE6 BIT(6)
> +#define MAX77620_IRQ_LVL2_GPIO_EDGE7 BIT(7)
> +
> +#define MAX77620_CNFG1_32K_OUT0_EN BIT(2)
> +
> +#define MAX77620_ONOFFCNFG1_SFT_RST BIT(7)
> +#define MAX77620_ONOFFCNFG1_MRT_MASK 0x38
> +#define MAX77620_ONOFFCNFG1_MRT_SHIFT 0x3
> +#define MAX77620_ONOFFCNFG1_SLPEN BIT(2)
> +#define MAX77620_ONOFFCNFG1_PWR_OFF BIT(1)
> +#define MAX20024_ONOFFCNFG1_CLRSE 0x18
> +
> +#define MAX77620_ONOFFCNFG2_SFT_RST_WK BIT(7)
> +#define MAX77620_ONOFFCNFG2_WD_RST_WK BIT(6)
> +#define MAX77620_ONOFFCNFG2_SLP_LPM_MSK BIT(5)
> +#define MAX77620_ONOFFCNFG2_WK_EN0 BIT(0)
> +
> +#define MAX77620_GLBLM_MASK BIT(0)
> +
> +#define MAX77620_WDTC_MASK 0x3
> +#define MAX77620_WDTOFFC BIT(4)
> +#define MAX77620_WDTSLPC BIT(3)
> +#define MAX77620_WDTEN BIT(2)
> +
> +#define MAX77620_TWD_MASK 0x3
> +#define MAX77620_TWD_2s 0x0
> +#define MAX77620_TWD_16s 0x1
> +#define MAX77620_TWD_64s 0x2
> +#define MAX77620_TWD_128s 0x3
> +
> +#define MAX77620_CNFGGLBL1_LBDAC_EN BIT(7)
> +#define MAX77620_CNFGGLBL1_MPPLD BIT(6)
> +#define MAX77620_CNFGGLBL1_LBHYST (BIT(5) | BIT(4))
> +#define MAX77620_CNFGGLBL1_LBDAC 0x0E
> +#define MAX77620_CNFGGLBL1_LBRSTEN BIT(0)
> +
> +/* CNFG BBC registers */
> +#define MAX77620_CNFGBBC_ENABLE BIT(0)
> +#define MAX77620_CNFGBBC_CURRENT_MASK 0x06
> +#define MAX77620_CNFGBBC_CURRENT_SHIFT 1
> +#define MAX77620_CNFGBBC_VOLTAGE_MASK 0x18
> +#define MAX77620_CNFGBBC_VOLTAGE_SHIFT 3
> +#define MAX77620_CNFGBBC_LOW_CURRENT_ENABLE BIT(5)
> +#define MAX77620_CNFGBBC_RESISTOR_MASK 0xC0
> +#define MAX77620_CNFGBBC_RESISTOR_SHIFT 6
> +
> +/* I2c Slave Id */
> +enum {
> + MAX77620_PWR_SLAVE,
> + MAX77620_RTC_SLAVE,
> + MAX77620_NUM_SLAVES,
> +};
> +
> +/* GPIOs */
> +enum {
> + MAX77620_GPIO0,
> + MAX77620_GPIO1,
> + MAX77620_GPIO2,
> + MAX77620_GPIO3,
> + MAX77620_GPIO4,
> + MAX77620_GPIO5,
> + MAX77620_GPIO6,
> + MAX77620_GPIO7,
> +
> + MAX77620_GPIO_NR,
> +};
> +
> +/* Interrupts */
> +enum {
> + MAX77620_IRQ_TOP_GLBL, /* Low-Battery */
> + MAX77620_IRQ_TOP_SD, /* SD power fail */
> + MAX77620_IRQ_TOP_LDO, /* LDO power fail */
> + MAX77620_IRQ_TOP_GPIO, /* TOP GPIO internal int to MAX77620 */
> + MAX77620_IRQ_TOP_RTC, /* RTC */
> + MAX77620_IRQ_TOP_32K, /* 32kHz oscillator */
> + MAX77620_IRQ_TOP_ONOFF, /* ON/OFF oscillator */
> +
> + MAX77620_IRQ_LBT_MBATLOW, /* Thermal alarm status, > 120C */
> + MAX77620_IRQ_LBT_TJALRM1, /* Thermal alarm status, > 120C */
> + MAX77620_IRQ_LBT_TJALRM2, /* Thermal alarm status, > 140C */
> +
> + MAX77620_IRQ_GPIO0, /* GPIO0 edge detection */
> + MAX77620_IRQ_GPIO1, /* GPIO1 edge detection */
> + MAX77620_IRQ_GPIO2, /* GPIO2 edge detection */
> + MAX77620_IRQ_GPIO3, /* GPIO3 edge detection */
> + MAX77620_IRQ_GPIO4, /* GPIO4 edge detection */
> + MAX77620_IRQ_GPIO5, /* GPIO5 edge detection */
> + MAX77620_IRQ_GPIO6, /* GPIO6 edge detection */
> + MAX77620_IRQ_GPIO7, /* GPIO7 edge detection */
> +
> + MAX77620_IRQ_ONOFF_MRWRN, /* Hard power off warnning */
> + MAX77620_IRQ_ONOFF_EN0_1SEC, /* EN0 active for 1s */
> + MAX77620_IRQ_ONOFF_EN0_F, /* EN0 falling */
> + MAX77620_IRQ_ONOFF_EN0_R, /* EN0 rising */
> + MAX77620_IRQ_ONOFF_LID_F, /* LID falling */
> + MAX77620_IRQ_ONOFF_LID_R, /* LID rising */
> + MAX77620_IRQ_ONOFF_ACOK_F, /* ACOK falling */
> + MAX77620_IRQ_ONOFF_ACOK_R, /* ACOK rising */
> +
> + MAX77620_IRQ_NVER, /* Non-Volatile Event Recorder */
> + MAX77620_IRQ_NR,
> +};
> +
> +enum max77620_regulators {
> + MAX77620_REGULATOR_ID_SD0,
> + MAX77620_REGULATOR_ID_SD1,
> + MAX77620_REGULATOR_ID_SD2,
> + MAX77620_REGULATOR_ID_SD3,
> + MAX77620_REGULATOR_ID_SD4,
> + MAX77620_REGULATOR_ID_LDO0,
> + MAX77620_REGULATOR_ID_LDO1,
> + MAX77620_REGULATOR_ID_LDO2,
> + MAX77620_REGULATOR_ID_LDO3,
> + MAX77620_REGULATOR_ID_LDO4,
> + MAX77620_REGULATOR_ID_LDO5,
> + MAX77620_REGULATOR_ID_LDO6,
> + MAX77620_REGULATOR_ID_LDO7,
> + MAX77620_REGULATOR_ID_LDO8,
> + MAX77620_NUM_REGS,
> +};
> +
> +/* FPS Source */
> +enum max77620_regulator_fps_src {
> + FPS_SRC_0,
> + FPS_SRC_1,
> + FPS_SRC_2,
> + FPS_SRC_NONE,
> + FPS_SRC_DEF,
> +};
> +
> +/* Regulator types */
> +enum max77620_regulator_type {
> + MAX77620_REGULATOR_TYPE_SD,
> + MAX77620_REGULATOR_TYPE_LDO_N,
> + MAX77620_REGULATOR_TYPE_LDO_P,
> +};
> +
> +enum max77620_chip_id {
> + MAX77620,
> + MAX20024,
> +};
> +
> +struct max77620_chip {
> + struct device *dev;
> +
> + struct i2c_client *clients[MAX77620_NUM_SLAVES];
> + struct regmap *rmap[MAX77620_NUM_SLAVES];
> +
> + int chip_irq;
> + int irq_base;
> + int irq_mbattlow;
> +
> + struct mutex mutex_config;
> + bool sleep_enable;
> + bool enable_global_lpm;
> + int active_fps_period[3];
> + int suspend_fps_period[3];
> +
> + int es_minor_version;
> + int es_major_version;
You set it once and...? Please clean this driver from such
internal/vendor stuff.
> +
> + struct regmap_irq_chip_data *top_irq_data;
> + struct regmap_irq_chip_data *gpio_irq_data;
> +
> + /* chip id */
> + u32 id;
> +};
> +
> +static inline int max77620_irq_get_virq(struct device *dev, int irq)
> +{
> + struct max77620_chip *chip = dev_get_drvdata(dev);
> +
> + return regmap_irq_get_virq(chip->top_irq_data, irq);
> +}
> +
> +static inline int max77620_reg_write(struct device *dev, int sid,
> + unsigned int reg, u8 val)
> +{
> + struct max77620_chip *chip = dev_get_drvdata(dev);
> +
> + return regmap_write(chip->rmap[sid], reg, val);
> +}
> +
> +static inline int max77620_reg_writes(struct device *dev, int sid,
> + unsigned int reg, int len, void *val)
> +{
> + struct max77620_chip *chip = dev_get_drvdata(dev);
> + int ret = 0;
> + u8 *src = (u8 *)val;
> + int i;
> +
> + /* Device does not support bulk write */
> + for (i = 0; i < len; i++) {
> + ret = regmap_write(chip->rmap[sid], reg, *src++);
> + if (ret < 0)
> + break;
> + reg++;
> + }
> + if (ret < 0)
> + dev_err(chip->dev, "%s() failed: %d\n", __func__, ret);
New line.
> + return ret;
> +}
> +
> +static inline int max77620_reg_read(struct device *dev, int sid,
> + unsigned int reg, u8 *val)
> +{
> + struct max77620_chip *chip = dev_get_drvdata(dev);
> + unsigned int ival;
> + int ret;
> +
> + ret = regmap_read(chip->rmap[sid], reg, &ival);
> + if (ret < 0) {
> + dev_err(dev, "failed reading from reg 0x%02x\n", reg);
Great, how many errors you want to print? On error you will have
messages coming from:
1. max77620_reg_read
2. max77620_read_es_version
3. max77620_probe
Three errors messages for the same error.
> + return ret;
> + }
> + *val = ival;
> + return ret;
> +}
> +
> +static inline int max77620_reg_reads(struct device *dev, int sid,
> + unsigned int reg, int len, void *val)
> +{
> + struct max77620_chip *chip = dev_get_drvdata(dev);
> +
> + return regmap_bulk_read(chip->rmap[sid], reg, val, len);
> +}
> +
> +static inline int max77620_reg_update(struct device *dev, int sid,
> + unsigned int reg, unsigned int mask, unsigned int val)
> +{
> + struct max77620_chip *chip = dev_get_drvdata(dev);
> +
> + return regmap_update_bits(chip->rmap[sid], reg, mask, val);
> +}
I think all these shouldn't be static inlines in header. Although some
of them are one-liners but rest are not. Let the compiler decide what
to do with these wrappers.
Best regards,
Krzysztof
Powered by blists - more mailing lists