| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <5b24687aeff9e313287bd25a76fc64ce07a05f61.1452268345.git.cyrille.pitchen@atmel.com>
Date: Fri, 8 Jan 2016 17:02:18 +0100
From: Cyrille Pitchen <cyrille.pitchen@...el.com>
To: <computersforpeace@...il.com>, <linux-mtd@...ts.infradead.org>
CC: <nicolas.ferre@...el.com>, <boris.brezillon@...e-electrons.com>,
<marex@...x.de>, <vigneshr@...com>, <linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<devicetree@...r.kernel.org>, <robh+dt@...nel.org>,
<pawel.moll@....com>, <mark.rutland@....com>,
<ijc+devicetree@...lion.org.uk>, <galak@...eaurora.org>,
Cyrille Pitchen <cyrille.pitchen@...el.com>
Subject: [PATCH linux-next v2 06/14] mtd: spi-nor: fix support of Micron memories
This patch adds missing mode transitions. Indeed depending on both the
current memory mode and the new protocol wanted by the user, we may need
to perform a switch back to the Extended SPI mode.
However when the current mode is the Quad mode and the user has asked for
a Quad SPI protocol, we'd rather stay in Quad mode and use the Fast Read
4-4-4 command than switch to the Extended SPI mode and use the Fast Read
1-1-4 command.
Also we'd rather stay in Dual mode than swith to the Extended SPI mode
whenever the user has asked for Dual SPI protocol.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@...el.com>
---
drivers/mtd/spi-nor/spi-nor.c | 154 +++++++++++++++++++++++++++++++++++++++---
include/linux/mtd/spi-nor.h | 1 +
2 files changed, 147 insertions(+), 8 deletions(-)
diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index f8a4887ca6eb..db76af852198 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -1325,6 +1325,147 @@ static int winbond_set_single_mode(struct spi_nor *nor)
return 0;
}
+static int micron_set_protocol(struct spi_nor *nor, u8 mask, u8 val,
+ enum spi_nor_protocol proto)
+{
+ u8 evcr;
+ int ret;
+
+ /* Read the Enhanced Volatile Configuration Register (EVCR). */
+ ret = nor->read_reg(nor, SPINOR_OP_RD_EVCR, &evcr, 1);
+ if (ret < 0) {
+ dev_err(nor->dev, "error while reading EVCR register\n");
+ return ret;
+ }
+
+ /* Check whether we need to update the protocol bits. */
+ if ((evcr & mask) == val)
+ return 0;
+
+ /* Set EVCR protocol bits. */
+ write_enable(nor);
+ evcr = (evcr & ~mask) | val;
+ ret = nor->write_reg(nor, SPINOR_OP_WD_EVCR, &evcr, 1);
+ if (ret < 0) {
+ dev_err(nor->dev, "error while writing EVCR register\n");
+ return ret;
+ }
+
+ /* Switch reg protocol now before accessing any other registers. */
+ nor->reg_proto = proto;
+
+ ret = spi_nor_wait_till_ready(nor);
+ if (ret)
+ return ret;
+
+ /* Read EVCR and check it. */
+ ret = nor->read_reg(nor, SPINOR_OP_RD_EVCR, &evcr, 1);
+ if (ret < 0 || (evcr & mask) != val) {
+ dev_err(nor->dev, "Micron EVCR protocol bits not updated\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int micron_set_extended_spi_protocol(struct spi_nor *nor)
+{
+ int ret;
+
+ /* Set Quad/Dual bits to 11 to select the Extended SPI mode */
+ ret = micron_set_protocol(nor,
+ EVCR_QUAD_EN_MICRON | EVCR_DUAL_EN_MICRON,
+ EVCR_QUAD_EN_MICRON | EVCR_DUAL_EN_MICRON,
+ SNOR_PROTO_1_1_1);
+ if (ret) {
+ dev_err(nor->dev, "Failed to set Micron Extended SPI mode\n");
+ return ret;
+ }
+
+ nor->write_proto = SNOR_PROTO_1_1_1;
+ nor->erase_proto = SNOR_PROTO_1_1_1;
+ return 0;
+}
+
+static int micron_set_quad_mode(struct spi_nor *nor)
+{
+ /* Check whether the Dual SPI mode is enabled. */
+ if (unlikely(nor->read_proto == SNOR_PROTO_2_2_2)) {
+ int ret;
+
+ /*
+ * Exit Micron Dual mode and switch to the Extended SPI mode:
+ * we can change the mode safely as we write into a volatile
+ * register.
+ * Also the Quad mode is not worth it for MTD usages: it
+ * should only be relevant for eXecution In Place (XIP) usages,
+ * which are out of the scope of the spi-nor framework.
+ */
+ ret = micron_set_extended_spi_protocol(nor);
+ if (ret)
+ return ret;
+ }
+
+ /*
+ * Whatever the Quad mode is enabled or not, the
+ * Fast Read Quad Output 1-1-4 (0x6b) op code is supported.
+ */
+ if (nor->read_proto != SNOR_PROTO_4_4_4)
+ nor->read_proto = SNOR_PROTO_1_1_4;
+ nor->read_opcode = SPINOR_OP_READ_1_1_4;
+ return 0;
+}
+
+static int micron_set_dual_mode(struct spi_nor *nor)
+{
+ /* Check whether Quad mode is enabled. */
+ if (unlikely(nor->read_proto == SNOR_PROTO_4_4_4)) {
+ int ret;
+
+ /*
+ * Exit Micron Quad mode and switch to the Extended SPI mode:
+ * we can change the mode safely as we write into a volatile
+ * register.
+ * Also the Dual mode is not worth it for MTD usages: it
+ * should only be relevant for eXecution In Place (XIP) usages,
+ * which are out of the scope of the spi-nor framework.
+ */
+ ret = micron_set_extended_spi_protocol(nor);
+ if (ret)
+ return ret;
+ }
+
+ /*
+ * Whatever the Dual mode is enabled or not, the
+ * Fast Read Dual Output 1-1-2 (0x3b) op code is supported.
+ */
+ if (nor->read_proto != SNOR_PROTO_2_2_2)
+ nor->read_proto = SNOR_PROTO_1_1_2;
+ nor->read_opcode = SPINOR_OP_READ_1_1_2;
+ return 0;
+}
+
+static int micron_set_single_mode(struct spi_nor *nor)
+{
+ /* Check whether either the Dual or Quad mode is enabled. */
+ if (unlikely(nor->read_proto != SNOR_PROTO_1_1_1)) {
+ int ret;
+
+ /*
+ * Exit Micron Dual or Quad mode and switch to the Extended SPI
+ * mode: we can change the mode safely as we write into a
+ * volatile register.
+ */
+ ret = micron_set_extended_spi_protocol(nor);
+ if (ret)
+ return ret;
+
+ nor->read_proto = SNOR_PROTO_1_1_1;
+ }
+
+ return 0;
+}
+
static int set_quad_mode(struct spi_nor *nor, const struct flash_info *info)
{
int status;
@@ -1337,10 +1478,7 @@ static int set_quad_mode(struct spi_nor *nor, const struct flash_info *info)
return winbond_set_quad_mode(nor);
case SNOR_MFR_MICRON:
- /* Check whether Micron Quad mode is enabled. */
- if (nor->read_proto != SNOR_PROTO_4_4_4)
- nor->read_proto = SNOR_PROTO_1_1_4;
- break;
+ return micron_set_quad_mode(nor);
case SNOR_MFR_SPANSION:
status = spansion_quad_enable(nor);
@@ -1369,10 +1507,7 @@ static int set_dual_mode(struct spi_nor *nor, const struct flash_info *info)
return winbond_set_dual_mode(nor);
case SNOR_MFR_MICRON:
- /* Check whether Micron Dual mode is enabled. */
- if (nor->read_proto != SNOR_PROTO_2_2_2)
- nor->read_proto = SNOR_PROTO_1_1_2;
- break;
+ return micron_set_dual_mode(nor);
default:
nor->read_proto = SNOR_PROTO_1_1_2;
@@ -1392,6 +1527,9 @@ static int set_single_mode(struct spi_nor *nor, const struct flash_info *info)
case SNOR_MFR_WINBOND:
return winbond_set_single_mode(nor);
+ case SNOR_MFR_MICRON:
+ return micron_set_single_mode(nor);
+
default:
nor->read_proto = SNOR_PROTO_1_1_1;
break;
diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
index 46343f5a8162..d0a6f343a063 100644
--- a/include/linux/mtd/spi-nor.h
+++ b/include/linux/mtd/spi-nor.h
@@ -102,6 +102,7 @@
/* Enhanced Volatile Configuration Register bits */
#define EVCR_QUAD_EN_MICRON BIT(7) /* Micron Quad I/O */
+#define EVCR_DUAL_EN_MICRON BIT(6) /* Micron Dual I/O */
/* Flag Status Register bits */
#define FSR_READY BIT(7)
--
1.8.2.2
Powered by blists - more mailing lists