[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1452278231-9546-7-git-send-email-rklein@nvidia.com>
Date: Fri, 8 Jan 2016 13:37:08 -0500
From: Rhyland Klein <rklein@...dia.com>
To: Peter De Schrijver <pdeschrijver@...dia.com>
CC: Mike Turquette <mturquette@...aro.org>,
Stephen Warren <swarren@...dotorg.org>,
Stephen Boyd <sboyd@...eaurora.org>,
Thierry Reding <thierry.reding@...il.com>,
Alexandre Courbot <gnurou@...il.com>,
Bill Huang <bilhuang@...dia.com>, Jim Lin <jilin@...dia.com>,
Benson Leung <bleung@...omium.org>, linux-clk@...r.kernel.org,
linux-tegra@...r.kernel.org, linux-kernel@...r.kernel.org,
Rhyland Klein <rklein@...dia.com>
Subject: [PATCH 6/9] clk: tegra210: fix pllx dyn step calculation
The logic for calculating the input rate used when figuring out
the proper dynamic steps for pllx was incorrect. It is supposed to
be calculated using parent_rate / m but it was just using the parent
rate directly, therefore using the wrong step values.
Signed-off-by: Rhyland Klein <rklein@...dia.com>
---
drivers/clk/tegra/clk-tegra210.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/clk/tegra/clk-tegra210.c b/drivers/clk/tegra/clk-tegra210.c
index 2a7faa357130..5d8fac7052f2 100644
--- a/drivers/clk/tegra/clk-tegra210.c
+++ b/drivers/clk/tegra/clk-tegra210.c
@@ -780,13 +780,13 @@ static void pllx_get_dyn_steps(struct clk_hw *hw, u32 *step_a, u32 *step_b)
{
unsigned long input_rate;
- if (!IS_ERR_OR_NULL(hw->clk)) {
+ /* cf rate */
+ if (!IS_ERR_OR_NULL(hw->clk))
input_rate = clk_hw_get_rate(clk_hw_get_parent(hw));
- /* cf rate */
- input_rate /= tegra_pll_get_fixed_mdiv(hw, input_rate);
- } else {
+ else
input_rate = 38400000;
- }
+
+ input_rate /= tegra_pll_get_fixed_mdiv(hw, input_rate);
switch (input_rate) {
case 12000000:
--
1.9.1
Powered by blists - more mailing lists