| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <B256D81BAE5131468A838E5D7A243641D63E8740@penmbx01>
Date: Tue, 12 Jan 2016 07:40:30 +0000
From: "Yang, Wenyou" <Wenyou.Yang@...el.com>
To: Lee Jones <lee.jones@...aro.org>
CC: Rob Herring <robh+dt@...nel.org>, Pawel Moll <pawel.moll@....com>,
"Mark Rutland" <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
"Ferre, Nicolas" <Nicolas.FERRE@...el.com>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>
Subject: RE: [PATCH 1/2] mfd: act8945a: add Active-semi ACT8945A PMIC MFD
driver
Hi Lee,
Thank you very much for so many comments.
> -----Original Message-----
> From: Lee Jones [mailto:lee.jones@...aro.org]
> Sent: 2016年1月11日 13:49
> To: Yang, Wenyou <Wenyou.Yang@...el.com>
> Cc: Rob Herring <robh+dt@...nel.org>; Pawel Moll <pawel.moll@....com>;
> Mark Rutland <mark.rutland@....com>; Ian Campbell
> <ijc+devicetree@...lion.org.uk>; Kumar Gala <galak@...eaurora.org>; Ferre,
> Nicolas <Nicolas.FERRE@...el.com>; linux-kernel@...r.kernel.org;
> devicetree@...r.kernel.org
> Subject: Re: [PATCH 1/2] mfd: act8945a: add Active-semi ACT8945A PMIC MFD
> driver
>
> On Fri, 08 Jan 2016, Wenyou Yang wrote:
>
> > This patch adds support for the Active-semi ACT8945A PMIC.
> > It is a Multi Function Device with the following subdevices:
> > - Regulator
> > - Charger
> >
> > It is interfaced to the host controller using I2C interface, ACT8945A
> > is a child device of the I2C.
> >
> > Signed-off-by: Wenyou Yang <wenyou.yang@...el.com>
> > ---
> >
> > drivers/mfd/Kconfig | 8 +++
> > drivers/mfd/Makefile | 1 +
> > drivers/mfd/act8945a.c | 122
> ++++++++++++++++++++++++++++++++++++++++++
> > include/linux/mfd/act8945a.h | 25 +++++++++
> > 4 files changed, 156 insertions(+)
> > create mode 100644 drivers/mfd/act8945a.c create mode 100644
> > include/linux/mfd/act8945a.h
> >
> > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index
> > 9581ebb..018c72d 100644
> > --- a/drivers/mfd/Kconfig
> > +++ b/drivers/mfd/Kconfig
> > @@ -18,6 +18,14 @@ config MFD_CS5535
> > This is the core driver for CS5535/CS5536 MFD functions. This is
> > necessary for using the board's GPIO and MFGPT functionality.
> >
> > +config MFD_ACT8945A
> > + bool "Active-semi ACT8945A"
> > + select MFD_CORE
> > + select REGMAP_I2C
> > + depends on I2C && OF
> > + help
> > + Support for the ACT8945A PMIC from Active-Semi
>
> Checkpatch usually complains about single line helps.
>
> > config MFD_AS3711
> > bool "AMS AS3711"
> > select MFD_CORE
> > diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index
> > 0f230a6..2f1ca82 100644
> > --- a/drivers/mfd/Makefile
> > +++ b/drivers/mfd/Makefile
> > @@ -6,6 +6,7 @@
> > obj-$(CONFIG_MFD_88PM860X) += 88pm860x.o
> > obj-$(CONFIG_MFD_88PM800) += 88pm800.o 88pm80x.o
> > obj-$(CONFIG_MFD_88PM805) += 88pm805.o 88pm80x.o
> > +obj-$(CONFIG_MFD_ACT8945A) += act8945a.o
> > obj-$(CONFIG_MFD_SM501) += sm501.o
> > obj-$(CONFIG_MFD_ASIC3) += asic3.o tmio_core.o
> > obj-$(CONFIG_MFD_BCM590XX) += bcm590xx.o
> > diff --git a/drivers/mfd/act8945a.c b/drivers/mfd/act8945a.c new file
> > mode 100644 index 0000000..b9b8685
> > --- /dev/null
> > +++ b/drivers/mfd/act8945a.c
> > @@ -0,0 +1,122 @@
> > +/*
> > + * MFD driver for Active-semi ACT8945a PMIC
> > + *
> > + * Copyright (C) 2015 Atmel Corporation.
>
> Please update this.
>
> > + * Wenyou Yang <wenyou.yang@...el.com>
>
> * Author: Wenyou Yang <wenyou.yang@...el.com>
>
> > + * This software is licensed under the terms of the GNU General
> > + Public
> > + * License version 2, as published by the Free Software Foundation,
> > + and
> > + * may be copied, distributed, and modified under those terms.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
> the
> > + * GNU General Public License for more details.
>
> This is the long version. Any chance it can be shortened?
>
> > + */
> > +
> > +#include <linux/i2c.h>
> > +#include <linux/mfd/act8945a.h>
> > +#include <linux/mfd/core.h>
> > +#include <linux/module.h>
> > +#include <linux/of_device.h>
> > +#include <linux/regmap.h>
> > +
> > +static const struct mfd_cell act8945a_devs[] = {
> > + {
> > + .name = "act8945a-pmic",
> > + .of_compatible = "active-semi,act8945a-regulator",
> > + },
> > + {
> > + .name = "act8945a-charger",
> > + .of_compatible = "active-semi,act8945a-charger",
> > + },
> > +};
> > +
> > +static const struct regmap_config act8945a_regmap_config = {
> > + .reg_bits = 8,
> > + .val_bits = 8,
> > +};
> > +
> > +static int act8945a_i2c_probe(struct i2c_client *client,
> > + const struct i2c_device_id *id) {
> > + struct act8945a_dev *act8945a;
> > + int ret;
> > +
> > + act8945a = devm_kzalloc(&client->dev, sizeof(*act8945a), GFP_KERNEL);
> > + if (act8945a == NULL)
>
> if (!act8945a)
>
> > + return -ENOMEM;
> > +
> > + i2c_set_clientdata(client, act8945a);
> > +
> > + act8945a->dev = &client->dev;
> > + act8945a->i2c_client = client;
>
> If you're saving 'client' already, you don't need to save 'dev' too, as one can be
> retrieved from the other.
>
> > + act8945a->regmap = devm_regmap_init_i2c(client,
> > + &act8945a_regmap_config);
>
> Don't we have a generic call to obtain a single 8bit register yet?
I didn't find the your said function. Could you point out? Thanks
>
> > + if (IS_ERR(act8945a->regmap)) {
> > + ret = PTR_ERR(act8945a->regmap);
> > + dev_err(&client->dev, "regmap init failed: %d\n", ret);
> > + return ret;
> > + }
> > +
> > + ret = mfd_add_devices(act8945a->dev, -1, act8945a_devs,
>
> Please use the correct defines, instead of '-1'.
>
> > + ARRAY_SIZE(act8945a_devs), NULL, 0, NULL);
> > + if (ret < 0) {
>
> if (ret)
>
> > + dev_err(&client->dev, "mfd_add_devices failed: %d\n", ret);
>
> Be more explicit.
>
> "Failed to add sub devices".
>
> > + return ret;
> > + }
> > +
> > + dev_info(&client->dev, "added %zu mfd sub-devices\n",
> > + ARRAY_SIZE(act8945a_devs));
>
> This serves no one, please remove.
>
> > + return 0;
> > +
> > +}
> > +
> > +static int act8945a_i2c_remove(struct i2c_client *i2c) {
> > + struct act8945a_dev *act8945a = i2c_get_clientdata(i2c);
> > +
> > + mfd_remove_devices(act8945a->dev);
>
> mfd_remove_devices(i2c->dev);
>
> > + return 0;
> > +}
> > +
> > +static const struct i2c_device_id act8945a_i2c_id[] = {
> > + { "act8945a", 0 },
> > + {}
> > +};
> > +MODULE_DEVICE_TABLE(i2c, act8945a_i2c_id);
> > +
> > +static const struct of_device_id act8945a_of_match[] = {
> > + {.compatible = "active-semi,act8945a", },
> > + {},
> > +};
> > +MODULE_DEVICE_TABLE(of, act8945a_of_match);
> > +
> > +static struct i2c_driver act8945a_i2c_driver = {
> > + .driver = {
> > + .name = "act8945a",
> > + .owner = THIS_MODULE,
>
> Remove this line, it's taken care of elsewhere.
>
> > + .of_match_table = of_match_ptr(act8945a_of_match),
> > + },
> > + .probe = act8945a_i2c_probe,
> > + .remove = act8945a_i2c_remove,
> > + .id_table = act8945a_i2c_id,
> > +};
> > +
> > +static int __init act8945a_i2c_init(void) {
> > + return i2c_add_driver(&act8945a_i2c_driver);
> > +}
> > +subsys_initcall(act8945a_i2c_init);
> > +
> > +static void __exit act8945a_i2c_exit(void) {
> > + i2c_del_driver(&act8945a_i2c_driver);
> > +}
> > +module_exit(act8945a_i2c_exit);
> > +
> > +MODULE_DESCRIPTION("ACT8945A PMIC multi-function driver");
> > +MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Wenyou Yang
> > +<wenyou.yang@...el.com>");
> > diff --git a/include/linux/mfd/act8945a.h
> > b/include/linux/mfd/act8945a.h new file mode 100644 index
> > 0000000..5b18d16
> > --- /dev/null
> > +++ b/include/linux/mfd/act8945a.h
> > @@ -0,0 +1,25 @@
> > +/*
> > + * MFD for Active-semi ACT8945A PMIC
> > + *
> > + * Copyright (C) 2015 Atmel Corporation.
>
> Please update this.
>
> > + * This software is licensed under the terms of the GNU General
> > + Public
> > + * License version 2, as published by the Free Software Foundation,
> > + and
> > + * may be copied, distributed, and modified under those terms.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
> the
> > + * GNU General Public License for more details.
> > + */
> > +
> > +#ifndef _LINUX_MFD_ACT8945A_H
> > +#define _LINUX_MFD_ACT8945A_H
> > +
> > +struct act8945a_dev {
> > + struct device *dev;
>
> I don't think you need this.
Yes, will be removed in the next version.
>
> > + struct i2c_client *i2c_client;
>
> Where is this used?
Unused, will remove in the next version.
>
> > + struct regmap *regmap;
>
> Where is this used?
To be used for sub devices to access the device register.
>
> > +};
> > +
> > +#endif
>
> --
> Lee Jones
> Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source
> software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog
Best Regards,
Wenyou Yang
Powered by blists - more mailing lists