[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1452602781-22424-3-git-send-email-lee.jones@linaro.org>
Date: Tue, 12 Jan 2016 12:46:16 +0000
From: Lee Jones <lee.jones@...aro.org>
To: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Cc: kernel@...inux.com, maxime.coquelin@...com, ohad@...ery.com,
devicetree@...r.kernel.org, Nathan_Lynch@...tor.com,
f.fainelli@...il.com, ludovic.barre@...com, s-anna@...com,
Lee Jones <lee.jones@...aro.org>
Subject: [PATCH v5 2/7] remoteproc: dt: Provide bindings for ST's Remote Processor Controller driver
Signed-off-by: Ludovic Barre <ludovic.barre@...com>
Signed-off-by: Lee Jones <lee.jones@...aro.org>
---
.../devicetree/bindings/remoteproc/st-rproc.txt | 41 ++++++++++++++++++++++
1 file changed, 41 insertions(+)
create mode 100644 Documentation/devicetree/bindings/remoteproc/st-rproc.txt
diff --git a/Documentation/devicetree/bindings/remoteproc/st-rproc.txt b/Documentation/devicetree/bindings/remoteproc/st-rproc.txt
new file mode 100644
index 0000000..1031bcd
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/st-rproc.txt
@@ -0,0 +1,41 @@
+STMicroelectronics Co-Processor Bindings
+----------------------------------------
+
+This binding provides support for adjunct processors found on ST SoCs.
+
+Co-processors can be controlled from the bootloader or the primary OS. If
+the bootloader starts a co-processor, the primary OS must detect its state
+and act accordingly.
+
+Required properties:
+- compatible Should be one of:
+ "st,st231-rproc"
+ "st,st40-rproc"
+- memory-region Reserved memory (See: ../reserved-memory/reserved-memory.txt)
+- resets Reset lines (See: ../reset/reset.txt)
+- reset-names Must be "sw_reset" and "pwr_reset"
+- clocks Clock for co-processor (See: ../clock/clock-bindings.txt)
+- clock-frequency Clock frequency to set co-processor at if the bootloader
+ hasn't already done so
+- st,syscfg System configuration register which holds the boot vector
+ for the co-processor
+ 1st cell: Phandle to syscon block
+ 2nd cell: Boot vector register offset
+
+Example:
+
+ audio_reserved: rproc@...00000 {
+ compatible = "shared-dma-pool";
+ reg = <0x42000000 0x01000000>;
+ no-map;
+ };
+
+ st231-audio {
+ compatible = "st,st231-rproc";
+ memory-region = <&audio_reserved>;
+ resets = <&softreset STIH407_ST231_AUD_SOFTRESET>;
+ reset-names = "sw_reset";
+ clocks = <&clk_s_c0_flexgen CLK_ST231_AUD_0>;
+ clock-frequency = <600000000>;
+ st,syscfg = <&syscfg_core 0x228>;
+ };
--
1.9.1
Powered by blists - more mailing lists