linux-kernel - Re: [PATCH 1/2] phy: zynqmp: Add dt bindings for ZynqMP PHY.

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <56963C32.8070909@ti.com>
Date:	Wed, 13 Jan 2016 17:29:46 +0530
From:	Kishon Vijay Abraham I <kishon@...com>
To:	Subbaraya Sundeep Bhatta <subbaraya.sundeep.bhatta@...inx.com>,
	"robh@...nel.org" <robh@...nel.org>
CC:	"balbi@...com" <balbi@...com>,
	"gregkh@...uxfoundation.org" <gregkh@...uxfoundation.org>,
	"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 1/2] phy: zynqmp: Add dt bindings for ZynqMP PHY.



On Wednesday 13 January 2016 05:19 PM, Subbaraya Sundeep Bhatta wrote:
> Hi Kishon,
> 
>> -----Original Message-----
>> From: Kishon Vijay Abraham I [mailto:kishon@...com]
>> Sent: Wednesday, January 13, 2016 4:39 PM
>> To: Subbaraya Sundeep Bhatta; robh@...nel.org
>> Cc: balbi@...com; gregkh@...uxfoundation.org; devicetree@...r.kernel.org;
>> linux-kernel@...r.kernel.org; Subbaraya Sundeep Bhatta
>> Subject: Re: [PATCH 1/2] phy: zynqmp: Add dt bindings for ZynqMP PHY.
>>
>> Hi,
>>
>> On Wednesday 13 January 2016 02:52 PM, Subbaraya Sundeep Bhatta wrote:
>>> This patch adds the document describing dt bindings for ZynqMP PHY.
>>> ZynqMP SOC has a High Speed Processing System Gigabit Transceiver
>>> which provides PHY capabilties to USB, SATA, PCIE, Display Port and
>>> Ehernet SGMII controllers.
>>>
>>> Signed-off-by: Subbaraya Sundeep Bhatta <sbhatta@...inx.com>
>>> ---
>>>  .../devicetree/bindings/phy/phy-zynqmp.txt         | 104
>> +++++++++++++++++++++
>>>  1 file changed, 104 insertions(+)
>>>  create mode 100644
>>> Documentation/devicetree/bindings/phy/phy-zynqmp.txt
>>>
>>> diff --git a/Documentation/devicetree/bindings/phy/phy-zynqmp.txt
>>> b/Documentation/devicetree/bindings/phy/phy-zynqmp.txt
>>> new file mode 100644
>>> index 0000000..ec0d3de
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/phy/phy-zynqmp.txt
>>> @@ -0,0 +1,104 @@
>>> +Xilinx ZynqMP PHY binding
>>> +
>>> +This binding describes a ZynqMP PHY device that is used to control
>>> +ZynqMP High Speed Gigabit Transceiver(GT). ZynqMP PS GTR provides
>>> +four lanes and are used by USB, SATA, PCIE, Display port and Ethernet
>> SGMMI controllers.
>>> +
>>> +Required properties (controller (parent) node):
>>> +- compatible    : Should be "xlnx,zynqmp-psgtr"
>>> +
>>> +- reg		: Address and length of register sets for each device in
>>> +		  "reg-names"
>>> +- reg-names     : The names of the register addresses corresponding to the
>>> +		  registers filled in "reg":
>>> +			- serdes: SERDES block register set
>>> +			- siou: SIOU block register set
>>> +			- lpd: Low power domain peripherals reset control
>>> +			- fpd: Full power domain peripherals reset control
>>> +
>>> +-xlnx,tx_termination_fix: Include fix for a functional issue in the GT. The TX
>>> +			  termination resistance can be out of spec due to a
>>> +			  bug in the calibration logic. This issue will be fixed
>>> +			  in silicon in future versions.
>>> +
>>> +Required nodes	:  A sub-node is required for each lane the controller
>>> +		   provides. These nodes are translated by the driver's
>>> +		   .xlate() function.
>>
>> driver details need not be in the binding documentation.
> 
> Ok will remove this.
>>> +
>>> +Required properties (port (child) nodes):
>>> +lane0:
>>> +- #phy-cells	: Should be 1
>>> +		  Cell after port phandle is device type from:
>>> +			- XPSGTR_TYPE_PCIE_0
>>> +			- XPSGTR_TYPE_SATA_0
>>> +			- XPSGTR_TYPE_USB0
>>> +			- XPSGTR_TYPE_DP_1
>>> +			- XPSGTR_TYPE_SGMII0
>>
>> Why not use the already existing PHY TYPES?
>> phy-cells can be made as '2' and the last cell can be used as index if that's
>> required.
> 
> PCIE_0 means lane 0 of PCIe controller and USB0 is USB 0 controller
> (there are two USB controllers). To differentiate I named like above.
> phy-cells with 2 sounds good. Shall I add PHY_TYPE_SGMII to
> include/dt-bindings/phy/phy.h and remove the phy-zynqmp.h ?

yes, so that it can be used by others too.

Thanks
Kishon