lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Wed, 13 Jan 2016 22:29:16 +0100 From: Anton Wuerfel <anton.wuerfel@....de> To: Greg Kroah-Hartman <gregkh@...uxfoundation.org> Cc: Jiri Slaby <jslaby@...e.com>, "James E.J. Bottomley" <jejb@...isc-linux.org>, Helge Deller <deller@....de>, Joachim Eastwood <manabian@...il.com>, Matthias Brugger <matthias.bgg@...il.com>, Masahiro Yamada <yamada.masahiro@...ionext.com>, Peter Hurley <peter@...leysoftware.com>, Sebastian Andrzej Siewior <bigeasy@...utronix.de>, Andy Shevchenko <andriy.shevchenko@...ux.intel.com>, Phillip Raffeck <phillip.raffeck@....de>, Heikki Krogerus <heikki.krogerus@...ux.intel.com>, Peter Hung <hpeter@...il.com>, linux-serial@...r.kernel.org, linux-kernel@...r.kernel.org, linux-parisc@...r.kernel.org, linux-kernel@...cs.fau.de, Anton Würfel <anton.wuerfel@....de> Subject: [PATCH v6 10/15] tty: serial: 8250: Suitably replace printk From: Phillip Raffeck <phillip.raffeck@....de> This patch replaces printk by the corresponding variant of dev_* in order to fix checkpatch warnings. If no suitable device pointer is present, the corresponding pr_* variant is used. Signed-off-by: Phillip Raffeck <phillip.raffeck@....de> Signed-off-by: Anton Würfel <anton.wuerfel@....de> Cc: linux-kernel@...cs.fau.de --- drivers/tty/serial/8250/8250_core.c | 5 ++--- drivers/tty/serial/8250/8250_gsc.c | 7 ++++--- drivers/tty/serial/8250/8250_hp300.c | 20 +++++++++++--------- drivers/tty/serial/8250/8250_port.c | 3 +-- 4 files changed, 18 insertions(+), 17 deletions(-) diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index b60b58b..d6b4906 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -1094,9 +1094,8 @@ static int __init serial8250_init(void) serial8250_isa_init_ports(); - printk(KERN_INFO "Serial: 8250/16550 driver, " - "%d ports, IRQ sharing %sabled\n", nr_uarts, - share_irqs ? "en" : "dis"); + pr_info("Serial: 8250/16550 driver, %d ports, IRQ sharing %sabled\n", + nr_uarts, share_irqs ? "en" : "dis"); #ifdef CONFIG_SPARC ret = sunserial_register_minors(&serial8250_reg, UART_NR); diff --git a/drivers/tty/serial/8250/8250_gsc.c b/drivers/tty/serial/8250/8250_gsc.c index 2e3ea1a..b1e6ae9 100644 --- a/drivers/tty/serial/8250/8250_gsc.c +++ b/drivers/tty/serial/8250/8250_gsc.c @@ -42,7 +42,7 @@ static int __init serial_init_chip(struct parisc_device *dev) * the user what they're missing. */ if (parisc_parent(dev)->id.hw_type != HPHW_IOA) - printk(KERN_INFO + dev_info(&dev->dev, "Serial: device 0x%llx not configured.\n" "Enable support for Wax, Lasi, Asp or Dino.\n", (unsigned long long)dev->hpa.start); @@ -66,8 +66,9 @@ static int __init serial_init_chip(struct parisc_device *dev) err = serial8250_register_8250_port(&uart); if (err < 0) { - printk(KERN_WARNING - "serial8250_register_8250_port returned error %d\n", err); + dev_warn(&dev->dev, + "serial8250_register_8250_port returned error %d\n", + err); iounmap(uart.port.membase); return err; } diff --git a/drivers/tty/serial/8250/8250_hp300.c b/drivers/tty/serial/8250/8250_hp300.c index cf566bb..38166db 100644 --- a/drivers/tty/serial/8250/8250_hp300.c +++ b/drivers/tty/serial/8250/8250_hp300.c @@ -110,7 +110,7 @@ int __init hp300_setup_serial_console(void) /* Check for APCI console */ if (scode == 256) { #ifdef CONFIG_HPAPCI - printk(KERN_INFO "Serial console is HP APCI 1\n"); + pr_info("Serial console is HP APCI 1\n"); port.uartclk = HPAPCI_BAUD_BASE * 16; port.mapbase = (FRODO_BASE + FRODO_APCI_OFFSET(1)); @@ -118,7 +118,7 @@ int __init hp300_setup_serial_console(void) port.regshift = 2; add_preferred_console("ttyS", port.line, "9600n8"); #else - printk(KERN_WARNING "Serial console is APCI but support is disabled (CONFIG_HPAPCI)!\n"); + pr_warn("Serial console is APCI but support is disabled (CONFIG_HPAPCI)!\n"); return 0; #endif } else { @@ -127,7 +127,7 @@ int __init hp300_setup_serial_console(void) if (!pa) return 0; - printk(KERN_INFO "Serial console is HP DCA at select code %d\n", scode); + pr_info("Serial console is HP DCA at select code %d\n", scode); port.uartclk = HPDCA_BAUD_BASE * 16; port.mapbase = (pa + UART_OFFSET); @@ -141,13 +141,13 @@ int __init hp300_setup_serial_console(void) if (DIO_ID(pa + DIO_VIRADDRBASE) & 0x80) add_preferred_console("ttyS", port.line, "9600n8"); #else - printk(KERN_WARNING "Serial console is DCA but support is disabled (CONFIG_HPDCA)!\n"); + pr_warn("Serial console is DCA but support is disabled (CONFIG_HPDCA)!\n"); return 0; #endif } if (early_serial_setup(&port) < 0) - printk(KERN_WARNING "hp300_setup_serial_console(): early_serial_setup() failed.\n"); + pr_warn("%s: early_serial_setup() failed.\n", __func__); return 0; } #endif /* CONFIG_SERIAL_8250_CONSOLE */ @@ -179,8 +179,9 @@ static int hpdca_init_one(struct dio_dev *d, line = serial8250_register_8250_port(&uart); if (line < 0) { - printk(KERN_NOTICE "8250_hp300: register_serial() DCA scode %d" - " irq %d failed\n", d->scode, uart.port.irq); + dev_notice(&d->dev, + "8250_hp300: register_serial() DCA scode %d irq %d failed\n", + d->scode, uart.port.irq); return -ENOMEM; } @@ -260,8 +261,9 @@ static int __init hp300_8250_init(void) line = serial8250_register_8250_port(&uart); if (line < 0) { - printk(KERN_NOTICE "8250_hp300: register_serial() APCI" - " %d irq %d failed\n", i, uart.port.irq); + dev_notice(uart.port.dev, + "8250_hp300: register_serial() APCI %d irq %d failed\n", + i, uart.port.irq); kfree(port); continue; } diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index 5375c24..25fd6b4 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -1222,8 +1222,7 @@ static void autoconfig(struct uart_8250_port *up) out_lock: spin_unlock_irqrestore(&port->lock, flags); if (up->capabilities != old_capabilities) { - printk(KERN_WARNING - "ttyS%d: detected caps %08x should be %08x\n", + pr_warn("ttyS%d: detected caps %08x should be %08x\n", serial_index(port), old_capabilities, up->capabilities); } -- 1.9.1
Powered by blists - more mailing lists