| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1452764917-15628-1-git-send-email-martink@posteo.de>
Date: Thu, 14 Jan 2016 10:48:37 +0100
From: Martin Kepplinger <martink@...teo.de>
To: jic23@...nel.org, knaack.h@....de, lars@...afoo.de,
pmeerw@...erw.net, christoph.muellner@...obroma-systems.com,
mfuzzey@...keon.com
Cc: linux-iio@...r.kernel.org, linux-kernel@...r.kernel.org,
Martin Kepplinger <martink@...teo.de>,
Martin Kepplinger <martin.kepplinger@...obroma-systems.com>
Subject: [PATCH v5] iio: mma8452: add freefall detection for Freescale's accelerometers
This adds freefall event detection to the supported devices. It adds
the in_accel_x&y&z_mag_falling_en iio event attribute, which activates
freefall mode.
In freefall mode, the current acceleration magnitude (AND combination
of all axis values) is compared to the specified threshold.
If it falls under the threshold (in_accel_mag_falling_value),
the appropriate IIO event code is generated.
This is what the sysfs "events" directory for these devices looks
like after this change:
-rw-r--r-- 4096 Oct 23 08:45 in_accel_mag_falling_period
-rw-r--r-- 4096 Oct 23 08:45 in_accel_mag_falling_value
-rw-r--r-- 4096 Oct 23 08:45 in_accel_mag_rising_period
-rw-r--r-- 4096 Oct 23 08:45 in_accel_mag_rising_value
-r--r--r-- 4096 Oct 23 08:45 in_accel_scale
-rw-r--r-- 4096 Oct 23 08:45 in_accel_x&y&z_mag_falling_en
-rw-r--r-- 4096 Oct 23 08:45 in_accel_x_mag_rising_en
-rw-r--r-- 4096 Oct 23 08:45 in_accel_y_mag_rising_en
-rw-r--r-- 4096 Oct 23 08:45 in_accel_z_mag_rising_en
Signed-off-by: Martin Kepplinger <martin.kepplinger@...obroma-systems.com>
Signed-off-by: Christoph Muellner <christoph.muellner@...obroma-systems.com>
---
revision history
----------------
v1:
initial post
v2:
build all from correct event and channel spec structs
v3:
rising and falling are treated as equal now. Until last time, I had
misunderstood the iio events' user API definition. This works and
values always reflect the current state of operation.
v4:
fix error that caused a build warning
v5:
changes according to Peter's review
drivers/iio/accel/mma8452.c | 157 +++++++++++++++++++++++++++++++++++++++-----
1 file changed, 140 insertions(+), 17 deletions(-)
diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c
index ccc632a..820a8a3 100644
--- a/drivers/iio/accel/mma8452.c
+++ b/drivers/iio/accel/mma8452.c
@@ -15,7 +15,7 @@
*
* 7-bit I2C slave address 0x1c/0x1d (pin selectable)
*
- * TODO: orientation / freefall events, autosleep
+ * TODO: orientation events, autosleep
*/
#include <linux/module.h>
@@ -416,6 +416,47 @@ fail:
return ret;
}
+/* returns >0 if in freefall mode, 0 if not or <0 if an error occured */
+static int mma8452_freefall_mode_enabled(struct mma8452_data *data)
+{
+ int val;
+ const struct mma_chip_info *chip = data->chip_info;
+
+ val = i2c_smbus_read_byte_data(data->client, chip->ev_cfg);
+ if (val < 0)
+ return val;
+
+ return !(val & MMA8452_FF_MT_CFG_OAE);
+}
+
+static int mma8452_set_freefall_mode(struct mma8452_data *data, bool state)
+{
+ int val;
+ const struct mma_chip_info *chip = data->chip_info;
+
+ val = i2c_smbus_read_byte_data(data->client, chip->ev_cfg);
+ if (val < 0)
+ return val;
+
+ if (state && !(mma8452_freefall_mode_enabled(data))) {
+ val |= BIT(idx_x + chip->ev_cfg_chan_shift);
+ val |= BIT(idx_y + chip->ev_cfg_chan_shift);
+ val |= BIT(idx_z + chip->ev_cfg_chan_shift);
+ val &= ~MMA8452_FF_MT_CFG_OAE;
+ } else if (!state && mma8452_freefall_mode_enabled(data)) {
+ val &= ~BIT(idx_x + chip->ev_cfg_chan_shift);
+ val &= ~BIT(idx_y + chip->ev_cfg_chan_shift);
+ val &= ~BIT(idx_z + chip->ev_cfg_chan_shift);
+ val |= MMA8452_FF_MT_CFG_OAE;
+ }
+
+ val = mma8452_change_config(data, chip->ev_cfg, val);
+ if (val)
+ return val;
+
+ return 0;
+}
+
static int mma8452_set_hp_filter_frequency(struct mma8452_data *data,
int val, int val2)
{
@@ -609,12 +650,22 @@ static int mma8452_read_event_config(struct iio_dev *indio_dev,
const struct mma_chip_info *chip = data->chip_info;
int ret;
- ret = i2c_smbus_read_byte_data(data->client,
- data->chip_info->ev_cfg);
- if (ret < 0)
- return ret;
+ switch (dir) {
+ case IIO_EV_DIR_FALLING:
+ return mma8452_freefall_mode_enabled(data);
+ case IIO_EV_DIR_RISING:
+ if (mma8452_freefall_mode_enabled(data))
+ return 0;
+
+ ret = i2c_smbus_read_byte_data(data->client,
+ data->chip_info->ev_cfg);
+ if (ret < 0)
+ return ret;
- return !!(ret & BIT(chan->scan_index + chip->ev_cfg_chan_shift));
+ return !!(ret & BIT(chan->scan_index + chip->ev_cfg_chan_shift));
+ default:
+ return -EINVAL;
+ }
}
static int mma8452_write_event_config(struct iio_dev *indio_dev,
@@ -627,19 +678,34 @@ static int mma8452_write_event_config(struct iio_dev *indio_dev,
const struct mma_chip_info *chip = data->chip_info;
int val;
- val = i2c_smbus_read_byte_data(data->client, chip->ev_cfg);
- if (val < 0)
- return val;
-
- if (state)
- val |= BIT(chan->scan_index + chip->ev_cfg_chan_shift);
- else
- val &= ~BIT(chan->scan_index + chip->ev_cfg_chan_shift);
+ switch (dir) {
+ case IIO_EV_DIR_FALLING:
+ return mma8452_set_freefall_mode(data, state);
+ case IIO_EV_DIR_RISING:
+ val = i2c_smbus_read_byte_data(data->client, chip->ev_cfg);
+ if (val < 0)
+ return val;
+
+ if (state) {
+ if (mma8452_freefall_mode_enabled(data)) {
+ val &= ~BIT(idx_x + chip->ev_cfg_chan_shift);
+ val &= ~BIT(idx_y + chip->ev_cfg_chan_shift);
+ val &= ~BIT(idx_z + chip->ev_cfg_chan_shift);
+ val |= MMA8452_FF_MT_CFG_OAE;
+ }
+ val |= BIT(chan->scan_index + chip->ev_cfg_chan_shift);
+ } else {
+ if (mma8452_freefall_mode_enabled(data))
+ return -EBUSY;
+ val &= ~BIT(chan->scan_index + chip->ev_cfg_chan_shift);
+ }
- val |= chip->ev_cfg_ele;
- val |= MMA8452_FF_MT_CFG_OAE;
+ val |= chip->ev_cfg_ele;
- return mma8452_change_config(data, chip->ev_cfg, val);
+ return mma8452_change_config(data, chip->ev_cfg, val);
+ default:
+ return -EINVAL;
+ }
}
static void mma8452_transient_interrupt(struct iio_dev *indio_dev)
@@ -652,6 +718,16 @@ static void mma8452_transient_interrupt(struct iio_dev *indio_dev)
if (src < 0)
return;
+ if (mma8452_freefall_mode_enabled(data)) {
+ iio_push_event(indio_dev,
+ IIO_MOD_EVENT_CODE(IIO_ACCEL, 0,
+ IIO_MOD_X_AND_Y_AND_Z,
+ IIO_EV_TYPE_MAG,
+ IIO_EV_DIR_FALLING),
+ ts);
+ return;
+ }
+
if (src & data->chip_info->ev_src_xe)
iio_push_event(indio_dev,
IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, IIO_MOD_X,
@@ -745,6 +821,27 @@ static int mma8452_reg_access_dbg(struct iio_dev *indio_dev,
return 0;
}
+static const struct iio_event_spec mma8452_freefall_event[] = {
+ {
+ .type = IIO_EV_TYPE_MAG,
+ .dir = IIO_EV_DIR_FALLING,
+ .mask_separate = BIT(IIO_EV_INFO_ENABLE),
+ .mask_shared_by_type = BIT(IIO_EV_INFO_VALUE) |
+ BIT(IIO_EV_INFO_PERIOD) |
+ BIT(IIO_EV_INFO_HIGH_PASS_FILTER_3DB)
+ },
+};
+
+static const struct iio_event_spec mma8652_freefall_event[] = {
+ {
+ .type = IIO_EV_TYPE_MAG,
+ .dir = IIO_EV_DIR_FALLING,
+ .mask_separate = BIT(IIO_EV_INFO_ENABLE),
+ .mask_shared_by_type = BIT(IIO_EV_INFO_VALUE) |
+ BIT(IIO_EV_INFO_PERIOD)
+ },
+};
+
static const struct iio_event_spec mma8452_transient_event[] = {
{
.type = IIO_EV_TYPE_MAG,
@@ -781,6 +878,24 @@ static struct attribute_group mma8452_event_attribute_group = {
.attrs = mma8452_event_attributes,
};
+#define MMA8452_FREEFALL_CHANNEL(modifier) { \
+ .type = IIO_ACCEL, \
+ .modified = 1, \
+ .channel2 = modifier, \
+ .scan_index = -1, \
+ .event_spec = mma8452_freefall_event, \
+ .num_event_specs = ARRAY_SIZE(mma8452_freefall_event), \
+}
+
+#define MMA8652_FREEFALL_CHANNEL(modifier) { \
+ .type = IIO_ACCEL, \
+ .modified = 1, \
+ .channel2 = modifier, \
+ .scan_index = -1, \
+ .event_spec = mma8652_freefall_event, \
+ .num_event_specs = ARRAY_SIZE(mma8652_freefall_event), \
+}
+
#define MMA8452_CHANNEL(axis, idx, bits) { \
.type = IIO_ACCEL, \
.modified = 1, \
@@ -827,6 +942,7 @@ static const struct iio_chan_spec mma8452_channels[] = {
MMA8452_CHANNEL(Y, idx_y, 12),
MMA8452_CHANNEL(Z, idx_z, 12),
IIO_CHAN_SOFT_TIMESTAMP(idx_ts),
+ MMA8452_FREEFALL_CHANNEL(IIO_MOD_X_AND_Y_AND_Z),
};
static const struct iio_chan_spec mma8453_channels[] = {
@@ -834,6 +950,7 @@ static const struct iio_chan_spec mma8453_channels[] = {
MMA8452_CHANNEL(Y, idx_y, 10),
MMA8452_CHANNEL(Z, idx_z, 10),
IIO_CHAN_SOFT_TIMESTAMP(idx_ts),
+ MMA8452_FREEFALL_CHANNEL(IIO_MOD_X_AND_Y_AND_Z),
};
static const struct iio_chan_spec mma8652_channels[] = {
@@ -841,6 +958,7 @@ static const struct iio_chan_spec mma8652_channels[] = {
MMA8652_CHANNEL(Y, idx_y, 12),
MMA8652_CHANNEL(Z, idx_z, 12),
IIO_CHAN_SOFT_TIMESTAMP(idx_ts),
+ MMA8652_FREEFALL_CHANNEL(IIO_MOD_X_AND_Y_AND_Z),
};
static const struct iio_chan_spec mma8653_channels[] = {
@@ -848,6 +966,7 @@ static const struct iio_chan_spec mma8653_channels[] = {
MMA8652_CHANNEL(Y, idx_y, 10),
MMA8652_CHANNEL(Z, idx_z, 10),
IIO_CHAN_SOFT_TIMESTAMP(idx_ts),
+ MMA8652_FREEFALL_CHANNEL(IIO_MOD_X_AND_Y_AND_Z),
};
enum {
@@ -1190,6 +1309,10 @@ static int mma8452_probe(struct i2c_client *client,
if (ret < 0)
goto buffer_cleanup;
+ ret = mma8452_set_freefall_mode(data, false);
+ if (ret)
+ return ret;
+
return 0;
buffer_cleanup:
--
2.1.4
Powered by blists - more mailing lists