| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20160114191829.GA1990@katana>
Date: Thu, 14 Jan 2016 20:18:33 +0100
From: Wolfram Sang <wsa@...-dreams.de>
To: Linus Torvalds <torvalds@...ux-foundation.org>
Cc: linux-i2c@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PULL REQUEST] i2c for 4.5
Linus,
here is the pull request for the 4.5 merge window. Quite some driver
updates:
* piix4 can now handle multiplexed adapters
* brcmstb, xlr, eg20t, designware drivers support more SoCs
* emev2 gained i2c slave support
* img-scb and rcar got bigger refactoring to remove issues
* lots of common driver updates
i2c core changes:
* new quirk flag when an adapter does not support clock stretching, so
clients can be configured to avoid that if possible
* added a helper function to retrieve timing parameters from firmware
(with rcar being the first user)
* "multi-master" DT binding added so drivers can adapt to this setting
(like disabling PM to keep arbitration working)
* RuntimePM for the logical adapter device is now always enabled by the
core to ensure propagation from childs to the parent (the HW device)
* new macro builtin_i2c_driver to reduce boilerplate
Please pull.
Thanks,
Wolfram
The following changes since commit 31ade3b83e1821da5fbb2f11b5b3d4ab2ec39db8:
Linux 4.4-rc3 (2015-11-29 18:58:26 -0800)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git i2c/for-4.5
for you to fetch changes up to c698d639f72b55686ec3518d2bc8dc5f2eca9354:
i2c: create builtin_i2c_driver to avoid registration boilerplate (2016-01-13 11:06:03 +0100)
----------------------------------------------------------------
Akshay Bhat (1):
DT: i2c: trivial-devices: Add Epson RX8010 and MPL3115
Baruch Siach (1):
i2c: designware: retry transfer on transient failure
Christian Fetzer (3):
i2c: piix4: Convert piix4_main_adapter to array
i2c: piix4: Add support for multiplexed main adapter in SB800
i2c: piix4: Add adapter port name support for SB800 chipset
Fabio Estevam (2):
i2c: imx: Improve message log when DMA is not used
i2c: imx: Remove unneeded comments
Gao Pan (4):
i2c: imx: init bus recovery info before adding i2c adapter
i2c: imx: add runtime pm support to improve the performance
i2c: imx: improve code readability
i2c: imx: fix i2c resource leak with dma transfer
Geliang Tang (2):
i2c: designware: use to_pci_dev()
i2c: st: use to_platform_device()
Kamal Dasu (1):
i2c: brcmstb: Adding support for CM and DSL SoCs
LABBE Corentin (1):
i2c: taos-evm: replace simple_strtoul by kstrtou8
Lars-Peter Clausen (1):
i2c: xiic: Replace spinlock with mutex
Liguo Zhang (2):
i2c: mediatek: add i2c first write then read optimization
i2c: mediatek: fix i2c multi transfer issue in high speed mode
Ludovic Desroches (1):
i2c: at91: add support for the HOLD field
Masahiro Yamada (4):
i2c: uniphier: error out if clock rate is zero
i2c: uniphier: error out if bus speed is zero
i2c: uniphier_f: error out if clock rate is zero
i2c: uniphier_f: error out if bus speed is zero
Måns Rullgård (3):
i2c: xlr: add support for Sigma Designs controller variant
i2c: xlr: fix extra read/write at end of rx transfer
i2c: xlr: add interrupt support for Sigma Designs chips
Nicola Corna (4):
i2c: add i2c quirk flag for unsupported clock stretching
i2c: algo-bit: add I2C_AQ_NO_CLK_STRETCH
i2c: bcm2835: add I2C_AQ_NO_CLK_STRETCH
i2c: add i2c_check_quirks helper function
Niklas Söderlund (1):
i2c: emev2: add slave support
Paul Burton (2):
i2c: eg20t: set i2c_adapter->dev.of_node
i2c: eg20t: allow build on MIPS platforms
Paul Gortmaker (1):
i2c: create builtin_i2c_driver to avoid registration boilerplate
Shubhrajyoti Datta (2):
i2c: cadence: Move to sensible power management
i2c: cadence: Remove the suspended flag
Sifan Naeem (5):
i2c: img-scb: support I2C_M_IGNORE_NAK
i2c: img-scb: remove fifo EMPTYING interrupts handle
i2c: img-scb: add handle for stop detected interrupt
i2c: img-scb: add handle for Master halt interrupt
i2c: img-scb: support repeated starts on IP v3.3
Stephen Rothwell (1):
i2c: ibm_iic: rename i2c_timings struct due to clash with generic version
Suravee Suthikulpanit (2):
i2c: designware: Add support for AMD Seattle I2C
i2c: designware: Do not require clock when SSCN and FFCN are provided
Wolfram Sang (26):
i2c: rcar: make sure clocks are on when doing clock calculation
i2c: rcar: rework hw init
i2c: rcar: remove unused IOERROR state
i2c: rcar: remove spinlock
i2c: rcar: refactor setup of a msg
i2c: rcar: init new messages in irq
i2c: rcar: don't issue stop when HW does it automatically
i2c: rcar: check master irqs before slave irqs
i2c: rcar: revoke START request early
i2c: rcar: clean up after refactoring
i2c: rcar: handle difference in setting up non-first message
i2c: piix4: remove unneeded assignments
i2c: document generic DT bindings for timing parameters
i2c: add generic routine to parse DT for timing information
i2c: rcar: refactor probe function a little
i2c: rcar: switch to i2c generic dt parsing
i2c: rcar: honor additional i2c timings from DT
i2c: emev: select I2C slave support
i2c: make i2c_parse_fw_timings() always visible
i2c: document binding for multi-master case
i2c: rcar: remove macros dealing with flags
i2c: rcar: disable PM in multi-master mode
i2c: always enable RuntimePM for the adapter device
i2c: s3c2410: remove superfluous runtime PM calls
dt-bindings: move I2C eeprom descriptions to the proper file
dt-bindings: i2c: eeprom: add another EEPROM device
.../devicetree/bindings/eeprom/eeprom.txt | 21 +-
Documentation/devicetree/bindings/i2c/i2c-at91.txt | 5 +-
.../devicetree/bindings/i2c/i2c-brcmstb.txt | 2 +-
Documentation/devicetree/bindings/i2c/i2c-rcar.txt | 4 +
Documentation/devicetree/bindings/i2c/i2c.txt | 36 ++-
.../devicetree/bindings/i2c/trivial-devices.txt | 15 +-
drivers/i2c/algos/i2c-algo-bit.c | 6 +
drivers/i2c/busses/Kconfig | 9 +-
drivers/i2c/busses/i2c-at91.c | 53 +++-
drivers/i2c/busses/i2c-bcm2835.c | 10 +
drivers/i2c/busses/i2c-brcmstb.c | 80 ++++--
drivers/i2c/busses/i2c-cadence.c | 73 +++--
drivers/i2c/busses/i2c-designware-core.c | 23 +-
drivers/i2c/busses/i2c-designware-pcidrv.c | 4 +-
drivers/i2c/busses/i2c-designware-platdrv.c | 32 ++-
drivers/i2c/busses/i2c-eg20t.c | 1 +
drivers/i2c/busses/i2c-emev2.c | 112 +++++++-
drivers/i2c/busses/i2c-ibm_iic.c | 4 +-
drivers/i2c/busses/i2c-img-scb.c | 92 ++++--
drivers/i2c/busses/i2c-imx.c | 113 ++++++--
drivers/i2c/busses/i2c-mt65xx.c | 54 +++-
drivers/i2c/busses/i2c-piix4.c | 202 +++++++++++--
drivers/i2c/busses/i2c-rcar.c | 319 ++++++++++-----------
drivers/i2c/busses/i2c-s3c2410.c | 6 -
drivers/i2c/busses/i2c-st.c | 3 +-
drivers/i2c/busses/i2c-taos-evm.c | 8 +-
drivers/i2c/busses/i2c-uniphier-f.c | 11 +-
drivers/i2c/busses/i2c-uniphier.c | 11 +-
drivers/i2c/busses/i2c-xiic.c | 12 +-
drivers/i2c/busses/i2c-xlr.c | 250 ++++++++++++++--
drivers/i2c/i2c-core.c | 56 ++++
include/linux/i2c.h | 47 ++-
32 files changed, 1254 insertions(+), 420 deletions(-)
Download attachment "signature.asc" of type "application/pgp-signature" (820 bytes)
Powered by blists - more mailing lists