| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1452865330-32383-1-git-send-email-geert@linux-m68k.org>
Date: Fri, 15 Jan 2016 14:42:10 +0100
From: Geert Uytterhoeven <geert@...ux-m68k.org>
To: Mathias Nyman <mathias.nyman@...el.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Matthias Brugger <matthias.bgg@...il.com>
Cc: linux-usb@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org, linux-kernel@...r.kernel.org,
Geert Uytterhoeven <geert@...ux-m68k.org>
Subject: [PATCH] xhci: mediatek: Move PM functions inside #idef CONFIG_PM_SLEEP
If CONFIG_PM_SLEEP=n:
drivers/usb/host/xhci-mtk.c:136: warning: ‘xhci_mtk_host_disable’ defined but not used
drivers/usb/host/xhci-mtk.c:314: warning: ‘usb_wakeup_enable’ defined but not used
drivers/usb/host/xhci-mtk.c:322: warning: ‘usb_wakeup_disable’ defined but not used
Move all functions related to power management into the existing section
protected by #ifdef CONFIG_PM_SLEEP section to fix this.
Signed-off-by: Geert Uytterhoeven <geert@...ux-m68k.org>
---
drivers/usb/host/xhci-mtk.c | 242 ++++++++++++++++++++++----------------------
1 file changed, 121 insertions(+), 121 deletions(-)
diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c
index c9ab6a44c34aef05..43a1ae0fc0a9911e 100644
--- a/drivers/usb/host/xhci-mtk.c
+++ b/drivers/usb/host/xhci-mtk.c
@@ -132,42 +132,6 @@ static int xhci_mtk_host_enable(struct xhci_hcd_mtk *mtk)
return 0;
}
-static int xhci_mtk_host_disable(struct xhci_hcd_mtk *mtk)
-{
- struct mu3c_ippc_regs __iomem *ippc = mtk->ippc_regs;
- u32 value;
- int ret;
- int i;
-
- /* power down all u3 ports */
- for (i = 0; i < mtk->num_u3_ports; i++) {
- value = readl(&ippc->u3_ctrl_p[i]);
- value |= CTRL_U3_PORT_PDN;
- writel(value, &ippc->u3_ctrl_p[i]);
- }
-
- /* power down all u2 ports */
- for (i = 0; i < mtk->num_u2_ports; i++) {
- value = readl(&ippc->u2_ctrl_p[i]);
- value |= CTRL_U2_PORT_PDN;
- writel(value, &ippc->u2_ctrl_p[i]);
- }
-
- /* power down host ip */
- value = readl(&ippc->ip_pw_ctr1);
- value |= CTRL1_IP_HOST_PDN;
- writel(value, &ippc->ip_pw_ctr1);
-
- /* wait for host ip to sleep */
- ret = readl_poll_timeout(&ippc->ip_pw_sts1, value,
- (value & STS1_IP_SLEEP_STS), 100, 100000);
- if (ret) {
- dev_err(mtk->dev, "ip sleep failed!!!\n");
- return ret;
- }
- return 0;
-}
-
static int xhci_mtk_ssusb_config(struct xhci_hcd_mtk *mtk)
{
struct mu3c_ippc_regs __iomem *ippc = mtk->ippc_regs;
@@ -241,91 +205,6 @@ static void xhci_mtk_clks_disable(struct xhci_hcd_mtk *mtk)
clk_disable_unprepare(mtk->sys_clk);
}
-/* only clocks can be turn off for ip-sleep wakeup mode */
-static void usb_wakeup_ip_sleep_en(struct xhci_hcd_mtk *mtk)
-{
- u32 tmp;
- struct regmap *pericfg = mtk->pericfg;
-
- regmap_read(pericfg, PERI_WK_CTRL1, &tmp);
- tmp &= ~UWK_CTL1_IS_P;
- tmp &= ~(UWK_CTL1_IS_C(0xf));
- tmp |= UWK_CTL1_IS_C(0x8);
- regmap_write(pericfg, PERI_WK_CTRL1, tmp);
- regmap_write(pericfg, PERI_WK_CTRL1, tmp | UWK_CTL1_IS_E);
-
- regmap_read(pericfg, PERI_WK_CTRL1, &tmp);
- dev_dbg(mtk->dev, "%s(): WK_CTRL1[P6,E25,C26:29]=%#x\n",
- __func__, tmp);
-}
-
-static void usb_wakeup_ip_sleep_dis(struct xhci_hcd_mtk *mtk)
-{
- u32 tmp;
-
- regmap_read(mtk->pericfg, PERI_WK_CTRL1, &tmp);
- tmp &= ~UWK_CTL1_IS_E;
- regmap_write(mtk->pericfg, PERI_WK_CTRL1, tmp);
-}
-
-/*
-* for line-state wakeup mode, phy's power should not power-down
-* and only support cable plug in/out
-*/
-static void usb_wakeup_line_state_en(struct xhci_hcd_mtk *mtk)
-{
- u32 tmp;
- struct regmap *pericfg = mtk->pericfg;
-
- /* line-state of u2-port0 */
- regmap_read(pericfg, PERI_WK_CTRL1, &tmp);
- tmp &= ~UWK_CTL1_0P_LS_P;
- tmp &= ~(UWK_CTL1_0P_LS_C(0xf));
- tmp |= UWK_CTL1_0P_LS_C(0x8);
- regmap_write(pericfg, PERI_WK_CTRL1, tmp);
- regmap_read(pericfg, PERI_WK_CTRL1, &tmp);
- regmap_write(pericfg, PERI_WK_CTRL1, tmp | UWK_CTL1_0P_LS_E);
-
- /* line-state of u2-port1 */
- regmap_read(pericfg, PERI_WK_CTRL0, &tmp);
- tmp &= ~(UWK_CTL1_1P_LS_C(0xf));
- tmp |= UWK_CTL1_1P_LS_C(0x8);
- regmap_write(pericfg, PERI_WK_CTRL0, tmp);
- regmap_write(pericfg, PERI_WK_CTRL0, tmp | UWK_CTL1_1P_LS_E);
-}
-
-static void usb_wakeup_line_state_dis(struct xhci_hcd_mtk *mtk)
-{
- u32 tmp;
- struct regmap *pericfg = mtk->pericfg;
-
- /* line-state of u2-port0 */
- regmap_read(pericfg, PERI_WK_CTRL1, &tmp);
- tmp &= ~UWK_CTL1_0P_LS_E;
- regmap_write(pericfg, PERI_WK_CTRL1, tmp);
-
- /* line-state of u2-port1 */
- regmap_read(pericfg, PERI_WK_CTRL0, &tmp);
- tmp &= ~UWK_CTL1_1P_LS_E;
- regmap_write(pericfg, PERI_WK_CTRL0, tmp);
-}
-
-static void usb_wakeup_enable(struct xhci_hcd_mtk *mtk)
-{
- if (mtk->wakeup_src == SSUSB_WK_IP_SLEEP)
- usb_wakeup_ip_sleep_en(mtk);
- else if (mtk->wakeup_src == SSUSB_WK_LINE_STATE)
- usb_wakeup_line_state_en(mtk);
-}
-
-static void usb_wakeup_disable(struct xhci_hcd_mtk *mtk)
-{
- if (mtk->wakeup_src == SSUSB_WK_IP_SLEEP)
- usb_wakeup_ip_sleep_dis(mtk);
- else if (mtk->wakeup_src == SSUSB_WK_LINE_STATE)
- usb_wakeup_line_state_dis(mtk);
-}
-
static int usb_wakeup_of_property_parse(struct xhci_hcd_mtk *mtk,
struct device_node *dn)
{
@@ -696,6 +575,127 @@ static int xhci_mtk_remove(struct platform_device *dev)
}
#ifdef CONFIG_PM_SLEEP
+static int xhci_mtk_host_disable(struct xhci_hcd_mtk *mtk)
+{
+ struct mu3c_ippc_regs __iomem *ippc = mtk->ippc_regs;
+ u32 value;
+ int ret;
+ int i;
+
+ /* power down all u3 ports */
+ for (i = 0; i < mtk->num_u3_ports; i++) {
+ value = readl(&ippc->u3_ctrl_p[i]);
+ value |= CTRL_U3_PORT_PDN;
+ writel(value, &ippc->u3_ctrl_p[i]);
+ }
+
+ /* power down all u2 ports */
+ for (i = 0; i < mtk->num_u2_ports; i++) {
+ value = readl(&ippc->u2_ctrl_p[i]);
+ value |= CTRL_U2_PORT_PDN;
+ writel(value, &ippc->u2_ctrl_p[i]);
+ }
+
+ /* power down host ip */
+ value = readl(&ippc->ip_pw_ctr1);
+ value |= CTRL1_IP_HOST_PDN;
+ writel(value, &ippc->ip_pw_ctr1);
+
+ /* wait for host ip to sleep */
+ ret = readl_poll_timeout(&ippc->ip_pw_sts1, value,
+ (value & STS1_IP_SLEEP_STS), 100, 100000);
+ if (ret) {
+ dev_err(mtk->dev, "ip sleep failed!!!\n");
+ return ret;
+ }
+ return 0;
+}
+
+/* only clocks can be turn off for ip-sleep wakeup mode */
+static void usb_wakeup_ip_sleep_en(struct xhci_hcd_mtk *mtk)
+{
+ u32 tmp;
+ struct regmap *pericfg = mtk->pericfg;
+
+ regmap_read(pericfg, PERI_WK_CTRL1, &tmp);
+ tmp &= ~UWK_CTL1_IS_P;
+ tmp &= ~(UWK_CTL1_IS_C(0xf));
+ tmp |= UWK_CTL1_IS_C(0x8);
+ regmap_write(pericfg, PERI_WK_CTRL1, tmp);
+ regmap_write(pericfg, PERI_WK_CTRL1, tmp | UWK_CTL1_IS_E);
+
+ regmap_read(pericfg, PERI_WK_CTRL1, &tmp);
+ dev_dbg(mtk->dev, "%s(): WK_CTRL1[P6,E25,C26:29]=%#x\n",
+ __func__, tmp);
+}
+
+static void usb_wakeup_ip_sleep_dis(struct xhci_hcd_mtk *mtk)
+{
+ u32 tmp;
+
+ regmap_read(mtk->pericfg, PERI_WK_CTRL1, &tmp);
+ tmp &= ~UWK_CTL1_IS_E;
+ regmap_write(mtk->pericfg, PERI_WK_CTRL1, tmp);
+}
+
+/*
+* for line-state wakeup mode, phy's power should not power-down
+* and only support cable plug in/out
+*/
+static void usb_wakeup_line_state_en(struct xhci_hcd_mtk *mtk)
+{
+ u32 tmp;
+ struct regmap *pericfg = mtk->pericfg;
+
+ /* line-state of u2-port0 */
+ regmap_read(pericfg, PERI_WK_CTRL1, &tmp);
+ tmp &= ~UWK_CTL1_0P_LS_P;
+ tmp &= ~(UWK_CTL1_0P_LS_C(0xf));
+ tmp |= UWK_CTL1_0P_LS_C(0x8);
+ regmap_write(pericfg, PERI_WK_CTRL1, tmp);
+ regmap_read(pericfg, PERI_WK_CTRL1, &tmp);
+ regmap_write(pericfg, PERI_WK_CTRL1, tmp | UWK_CTL1_0P_LS_E);
+
+ /* line-state of u2-port1 */
+ regmap_read(pericfg, PERI_WK_CTRL0, &tmp);
+ tmp &= ~(UWK_CTL1_1P_LS_C(0xf));
+ tmp |= UWK_CTL1_1P_LS_C(0x8);
+ regmap_write(pericfg, PERI_WK_CTRL0, tmp);
+ regmap_write(pericfg, PERI_WK_CTRL0, tmp | UWK_CTL1_1P_LS_E);
+}
+
+static void usb_wakeup_line_state_dis(struct xhci_hcd_mtk *mtk)
+{
+ u32 tmp;
+ struct regmap *pericfg = mtk->pericfg;
+
+ /* line-state of u2-port0 */
+ regmap_read(pericfg, PERI_WK_CTRL1, &tmp);
+ tmp &= ~UWK_CTL1_0P_LS_E;
+ regmap_write(pericfg, PERI_WK_CTRL1, tmp);
+
+ /* line-state of u2-port1 */
+ regmap_read(pericfg, PERI_WK_CTRL0, &tmp);
+ tmp &= ~UWK_CTL1_1P_LS_E;
+ regmap_write(pericfg, PERI_WK_CTRL0, tmp);
+}
+
+static void usb_wakeup_enable(struct xhci_hcd_mtk *mtk)
+{
+ if (mtk->wakeup_src == SSUSB_WK_IP_SLEEP)
+ usb_wakeup_ip_sleep_en(mtk);
+ else if (mtk->wakeup_src == SSUSB_WK_LINE_STATE)
+ usb_wakeup_line_state_en(mtk);
+}
+
+static void usb_wakeup_disable(struct xhci_hcd_mtk *mtk)
+{
+ if (mtk->wakeup_src == SSUSB_WK_IP_SLEEP)
+ usb_wakeup_ip_sleep_dis(mtk);
+ else if (mtk->wakeup_src == SSUSB_WK_LINE_STATE)
+ usb_wakeup_line_state_dis(mtk);
+}
+
static int xhci_mtk_suspend(struct device *dev)
{
struct xhci_hcd_mtk *mtk = dev_get_drvdata(dev);
--
1.9.1
Powered by blists - more mailing lists