| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20160115031515.GA19797@rob-hp-laptop>
Date: Thu, 14 Jan 2016 21:15:15 -0600
From: Rob Herring <robh@...nel.org>
To: Maxime Ripard <maxime.ripard@...e-electrons.com>
Cc: Mike Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...eaurora.org>,
David Airlie <airlied@...ux.ie>,
Thierry Reding <thierry.reding@...il.com>,
Philipp Zabel <p.zabel@...gutronix.de>,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, linux-clk@...r.kernel.org,
dri-devel@...ts.freedesktop.org, linux-sunxi@...glegroups.com,
Laurent Pinchart <laurent.pinchart@...asonboard.com>,
Chen-Yu Tsai <wens@...e.org>,
Hans de Goede <hdegoede@...hat.com>,
Alexander Kaplan <alex@...tthing.co>,
Boris Brezillon <boris.brezillon@...e-electrons.com>,
Wynter Woods <wynter@...tthing.co>,
Thomas Petazzoni <thomas.petazzoni@...e-electrons.com>,
Rob Clark <robdclark@...il.com>,
Daniel Vetter <daniel@...ll.ch>
Subject: Re: [PATCH v2 17/26] drm: sun4i: Add DT bindings documentation
On Thu, Jan 14, 2016 at 04:25:00PM +0100, Maxime Ripard wrote:
> The display pipeline of the Allwinner A10 is involving several loosely
> coupled components.
>
> Add a documentation for the bindings.
>
> Signed-off-by: Maxime Ripard <maxime.ripard@...e-electrons.com>
> ---
> .../bindings/display/sunxi/sun4i-drm.txt | 228 +++++++++++++++++++++
drm is a linuxism. It shouldn't be used for binding doc.
> 1 file changed, 228 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
>
> diff --git a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
> new file mode 100644
> index 000000000000..061bc87147a3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
> @@ -0,0 +1,228 @@
> +Allwinner A10 Display Pipeline
> +==============================
> +
> +The Allwinner A10 Display pipeline is composed of several components
> +that are going to be documented below:
> +
> +TV Encoder
> +----------
> +
> +The TV Encoder supports the composite and VGA output. It is one end of
> +the pipeline.
> +
> +Required properties:
> + - compatible: value should be "allwinner,sun4i-a10-tv-encoder".
> + - reg: base address and size of memory-mapped region
> + - clocks: the clocks driving the TV encoder
> +
> +- ports: A ports node with endpoint definitions as defined in
> + Documentation/devicetree/bindings/media/video-interfaces.txt. The
> + first port should be the input endpoint.
> +
> +TCON
> +----
> +
> +The TCON acts as a timing controller for RGB, LVDS and TV interfaces.
> +
> +Required properties:
> + - compatible: value should be "allwinner,sun4i-a10-tcon".
> + - reg: base address and size of memory-mapped region
> + - interrupts: interrupt associated to this IP
> + - clocks: phandles to the clocks feeding the TCON. Three are needed:
> + - 'ahb': the interface clocks
> + - 'tcon-ch0': The clock driving the TCON channel 0
> + - 'tcon-ch1': The clock driving the TCON channel 1
> +
> + - clock-names: the clock names mentioned above
> + - clock-output-names: Name of the pixel clock created
> +
> +- ports: A ports node with endpoint definitions as defined in
> + Documentation/devicetree/bindings/media/video-interfaces.txt. The
> + first port should be the input endpoint, the second one the output
> +
> +Optional properties:
> + - allwinner,panel: phandle to the panel used in our RGB interface
> +
> +
> +Display Engine Backend
> +----------------------
> +
> +The display engine backend exposes layers and sprites to the
> +system.
> +
> +Required properties:
> + - compatible: value must be one of:
> + * allwinner,sun5i-a13-display-backend
> + - reg: base address and size of the memory-mapped region.
> + - clocks: phandles to the clocks feeding the frontend and backend
> + * ahb: the backend interface clock
> + * mod: the backend module clock
> + * ram: the backend DRAM clock
> + - clock-names: the clock names mentioned above
> + - resets: phandles to the reset controllers driving the backend
> +
> +- ports: A ports node with endpoint definitions as defined in
> + Documentation/devicetree/bindings/media/video-interfaces.txt. The
> + first port should be the input endpoints, the second one the output
> +
> +Display Engine Frontend
> +-----------------------
> +
> +The display engine frontend does formats conversion, scaling,
> +deinterlacing and color space conversion.
> +
> +Required properties:
> + - compatible: value must be one of:
> + * allwinner,sun5i-a13-display-frontend
> + - reg: base address and size of the memory-mapped region.
> + - interrupts: interrupt associated to this IP
> + - clocks: phandles to the clocks feeding the frontend and backend
> + * ahb: the backend interface clock
> + * mod: the backend module clock
> + * ram: the backend DRAM clock
should be frontend?
> + - clock-names: the clock names mentioned above
> + - resets: phandles to the reset controllers driving the backend
ditto
> +
> +Display Engine Pipeline
> +-----------------------
> +
> +The display engine pipeline (and its entry point, since it can be
> +either directly the backend or the frontend) is represented as an
> +extra node.
> +
> +Required properties:
> + - compatible: value must be one of:
> + * allwinner,sun5i-a13-display-engine
> + - allwinner,pipelines: list of phandle to the entry points of the
> + pipelines (either to the frontend or backend)
> +
> +Example:
> +
> +panel: panel {
> + compatible = "olimex,lcd-olinuxino-43-ts";
This should either be a child of what it is attached to or use of-graph.
> +};
> +
> +tve0: tv-encoder@...0a000 {
> + compatible = "allwinner,sun4i-a10-tv-encoder";
> + reg = <0x01c0a000 0x1000>;
> + clocks = <&ahb_gates 34>;
> +
> + port {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + tve0_in_tcon0: endpoint@0 {
> + reg = <0>;
I would drop the reg where you only have 1 node for ports or endpoints.
> + remote-endpoint = <&tcon0_out_tve0>;
> + };
> + };
> +};
> +
> +tcon0: lcd-controller@...0c000 {
> + compatible = "allwinner,sun4i-a10-tcon";
> + reg = <0x01c0c000 0x1000>;
> + interrupts = <44>;
> + clocks = <&ahb_gates 36>,
> + <&tcon_ch0_clk>,
> + <&tcon_ch1_clk>;
> + clock-names = "ahb",
> + "tcon-ch0",
> + "tcon-ch1";
> + clock-output-names = "tcon-pixel-clock";
> + allwinner,panel = <&panel>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + tcon0_in: port@0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0>;
> +
> + tcon0_in_be0: endpoint@0 {
> + reg = <0>;
> + remote-endpoint = <&be0_out_tcon0>;
> + };
> + };
> +
> + tcon0_out: port@1 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <1>;
> +
> + tcon0_out_tve0: endpoint@0 {
> + reg = <0>;
> + remote-endpoint = <&tve0_in_tcon0>;
> + };
> + };
> + };
> +};
> +
> +fe0: display-frontend@...00000 {
> + compatible = "allwinner,sun5i-a13-display-frontend";
> + reg = <0x01e00000 0x20000>;
> + interrupts = <47>;
> + clocks = <&ahb_gates 46>, <&de_fe_clk>,
> + <&dram_gates 25>;
> + clock-names = "ahb", "mod",
> + "ram";
> + resets = <&de_fe_clk>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + fe0_out: port@0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0>;
> +
> + fe0_out_be0: endpoint@0 {
> + reg = <0>;
> + remote-endpoint = <&be0_in_fe0>;
> + };
> + };
> + };
> +};
> +
> +be0: display-backend@...60000 {
> + compatible = "allwinner,sun5i-a13-display-backend";
> + reg = <0x01e60000 0x10000>;
> + clocks = <&ahb_gates 44>, <&de_be_clk>,
> + <&dram_gates 26>;
> + clock-names = "ahb", "mod",
> + "ram";
> + resets = <&de_be_clk>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + be0_in: port@0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0>;
> +
> + be0_in_fe0: endpoint@0 {
> + reg = <0>;
> + remote-endpoint = <&fe0_out_be0>;
> + };
> + };
> +
> + be0_out: port@1 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <1>;
> +
> + be0_out_tcon0: endpoint@0 {
> + reg = <0>;
> + remote-endpoint = <&tcon0_in_be0>;
> + };
> + };
> +};
> +
> +display-engine {
> + compatible = "allwinner,sun5i-a13-display-engine";
> + pipelines = <&be0>;
> +};
> --
> 2.6.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists