linux-kernel - Re: [PATCH v3 6/9] ARM: dts: rockchip: add the sdio power sequence for kylin board

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <10023420.T8auvzlYRp@phil>
Date:	Sun, 17 Jan 2016 20:31:01 +0100
From:	Heiko Stuebner <heiko@...ech.de>
To:	Caesar Wang <wxt@...k-chips.com>
Cc:	linux-rockchip@...ts.infradead.org, leozwang@...gle.com,
	Mark Brown <broonie@...nel.org>, linux-kernel@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org, keescook@...gle.com
Subject: Re: [PATCH v3 6/9] ARM: dts: rockchip: add the sdio power sequence for kylin board

Am Freitag, 15. Januar 2016, 21:49:53 schrieb Caesar Wang:
> This patch adds the sdio power sequence for kylin board.
> The WLAN attached to a SDIO interface, wifi/bluetooth have
> reset and power been needed to enable.
> 
> AFAIK, the simple power sequence provider sets a value for multiple GPIOs.
> So the reset and power of WlAN chip can be handled in mmc power sequence.
> On the module itself this is one of these, that should can be handled by
> reset GPIOs in simple mmc power sequence.
> 
> The Bluetooth host wake is high active from bootup, this patch is also
> set pinctrl bias as the default to enable the pull up in soc internal.
> 
> Signed-off-by: Caesar Wang <wxt@...k-chips.com>

applied to my dts32 branch for 4.6,

after moving the sdio-pwrseq node to its correct alphabetical position. 
Please try to keep to the sorting :-)


Thanks
Heiko