[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <569C9DBB.6060808@atmel.com>
Date: Mon, 18 Jan 2016 09:09:31 +0100
From: Nicolas Ferre <nicolas.ferre@...el.com>
To: Jonathan Cameron <jic23@...nel.org>,
<alexandre.belloni@...e-electrons.com>, <linux-iio@...r.kernel.org>
CC: <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<plagnioj@...osoft.com>, <linux-arm-kernel@...ts.infradead.org>,
<pmeerw@...erw.net>, <robh@...nel.org>
Subject: Re: [PATCH v3 3/5] ARM: at91/dt: sama5d2: add adc device
Le 18/01/2016 08:59, Ludovic Desroches a écrit :
> On Sat, Jan 16, 2016 at 11:38:30AM +0000, Jonathan Cameron wrote:
>> On 14/01/16 15:38, Ludovic Desroches wrote:
>>> Add the ADC device, and remove the adc_op_clk which is useless since the
>>> adc sampling frequency is configured with sysfs.
>>>
>>> Signed-off-by: Ludovic Desroches <ludovic.desroches@...el.com>
>> I've now applied the driver to the togreg branch of iio.git.
>> Should get a pull request out to Greg in about 2 weeks time and it'll
>> probably be in linux-next a week after that. I'm assuming all the device
>> tree changes will got through the at91 tree and arm-soc etc.
>> Shout if you want me to take them through IIO.
>>
>
> Ok, I think Nicolas would take this patch.
Sure, we'll take them through AT91 then arm-soc trees.
Thanks, bye.
>>> ---
>>> arch/arm/boot/dts/sama5d2.dtsi | 18 ++++++++++++------
>>> 1 file changed, 12 insertions(+), 6 deletions(-)
>>>
>>> diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
>>> index 3f750f6..46dd430 100644
>>> --- a/arch/arm/boot/dts/sama5d2.dtsi
>>> +++ b/arch/arm/boot/dts/sama5d2.dtsi
>>> @@ -88,12 +88,6 @@
>>> #clock-cells = <0>;
>>> clock-frequency = <0>;
>>> };
>>> -
>>> - adc_op_clk: adc_op_clk{
>>> - compatible = "fixed-clock";
>>> - #clock-cells = <0>;
>>> - clock-frequency = <1000000>;
>>> - };
>>> };
>>>
>>> ns_sram: sram@...00000 {
>>> @@ -1085,6 +1079,18 @@
>>> status = "disabled";
>>> };
>>>
>>> + adc: adc@...30000 {
>>> + compatible = "atmel,sama5d2-adc";
>>> + reg = <0xfc030000 0x100>;
>>> + interrupts = <40 IRQ_TYPE_LEVEL_HIGH 7>;
>>> + clocks = <&adc_clk>;
>>> + clock-names = "adc_clk";
>>> + atmel,min-sample-rate-hz = <200000>;
>>> + atmel,max-sample-rate-hz = <20000000>;
>>> + atmel,startup-time-ms = <4>;
>>> + status = "disabled";
>>> + };
>>> +
>>> pioA: pinctrl@...38000 {
>>> compatible = "atmel,sama5d2-pinctrl";
>>> reg = <0xfc038000 0x600>;
>>>
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
>> the body of a message to majordomo@...r.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
Nicolas Ferre
Powered by blists - more mailing lists