lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list] 
Message-ID: <20160118171514.GG19062@n2100.arm.linux.org.uk>
Date:	Mon, 18 Jan 2016 17:15:14 +0000
From:	Russell King - ARM Linux <linux@....linux.org.uk>
To:	Yakir Yang <ykk@...k-chips.com>
Cc:	Mark Yao <mark.yao@...k-chips.com>,
	Heiko Stuebner <heiko@...ech.de>,
	Mark Rutland <mark.rutland@....com>,
	devicetree@...r.kernel.org, Pawel Moll <pawel.moll@....com>,
	Ian Campbell <ijc+devicetree@...lion.org.uk>,
	David Airlie <airlied@...ux.ie>, Ben Chan <benchan@...gle.com>,
	Ken Mixte <kmixter@...gle.com>, linux-kernel@...r.kernel.org,
	dri-devel@...ts.freedesktop.org,
	linux-rockchip@...ts.infradead.org,
	Rob Herring <robh+dt@...nel.org>,
	Kumar Gala <galak@...eaurora.org>,
	Thierry Reding <treding@...dia.com>,
	linux-arm-kernel@...ts.infradead.org,
	Zheng Yang <zhengyang@...k-chips.com>
Subject: Re: [PATCH v4] drm/rockchip: hdmi: add Innosilicon HDMI support

Hi,

Some comments below...

On Mon, Jan 18, 2016 at 10:42:20PM +0800, Yakir Yang wrote:
> +static int inno_hdmi_config_video_avi(struct inno_hdmi *hdmi)
> +{
> +	char info[HDMI_SIZE_AVI_INFOFRAME] = {0};
> +	int avi_color_mode;
> +	int i;
> +
> +	hdmi_writeb(hdmi, HDMI_CONTROL_PACKET_BUF_INDEX, INFOFRAME_AVI);
> +
> +	info[0] = 0x82;
> +	info[1] = 0x02;
> +	info[2] = 0x0D;
> +	info[3] = info[0] + info[1] + info[2];
> +
> +	if (hdmi->hdmi_data.enc_out_format == HDMI_COLORSPACE_RGB)
> +		avi_color_mode = AVI_COLOR_MODE_RGB;
> +	else if (hdmi->hdmi_data.enc_out_format == HDMI_COLORSPACE_YUV444)
> +		avi_color_mode = AVI_COLOR_MODE_YCBCR444;
> +	else if (hdmi->hdmi_data.enc_out_format == HDMI_COLORSPACE_YUV422)
> +		avi_color_mode = AVI_COLOR_MODE_YCBCR422;
> +	else
> +		avi_color_mode = AVI_COLOR_MODE_RGB;
> +
> +	info[4] = (avi_color_mode << 5);
> +	info[5] = (AVI_COLORIMETRY_NO_DATA << 6) |
> +		  (AVI_CODED_FRAME_ASPECT_NO_DATA << 4) |
> +		  ACTIVE_ASPECT_RATE_SAME_AS_CODED_FRAME;
> +
> +	info[6] = 0;
> +	info[7] = hdmi->hdmi_data.vic;
> +
> +	if (hdmi->hdmi_data.vic == 6 || hdmi->hdmi_data.vic == 7 ||
> +	    hdmi->hdmi_data.vic == 21 || hdmi->hdmi_data.vic == 22)
> +		info[8] = 1;
> +	else
> +		info[8] = 0;
> +
> +	/* Calculate avi info frame checKsum */
> +	for (i = 4; i < HDMI_SIZE_AVI_INFOFRAME; i++)
> +		info[3] += info[i];
> +	info[3] = 0x100 - info[3];
> +
> +	for (i = 0; i < HDMI_SIZE_AVI_INFOFRAME; i++)
> +		hdmi_writeb(hdmi, HDMI_CONTROL_PACKET_ADDR + i, info[i]);
> +
> +	return 0;

Is there a reason why the helpers in drivers/video/hdmi.c can't be used
to generate this?

hdmi_avi_infoframe_init / hdmi_avi_infoframe_pack and
drm_hdmi_avi_infoframe_from_display_mode ?

> +}
> +
> +static int inno_hdmi_config_video_vsi(struct inno_hdmi *hdmi)
> +{
> +	char info[HDMI_SIZE_VSI_INFOFRAME] = {0};
> +	int i;
> +
> +	hdmi_modb(hdmi, HDMI_PACKET_SEND_AUTO, m_PACKET_VSI_EN,
> +		  v_PACKET_VSI_EN(0));
> +
> +	hdmi_writeb(hdmi, HDMI_CONTROL_PACKET_BUF_INDEX, INFOFRAME_VSI);
> +
> +	/* Header Bytes */
> +	info[0] = 0x81;
> +	info[1] = 0x01;
> +
> +	/* PB1 - PB3 contain the 24bit IEEE Registration Identifier */
> +	info[4] = 0x03;
> +	info[5] = 0x0c;
> +	info[6] = 0x00;
> +
> +	/* PB4 - HDMI_Video_Format into bits 7:5 */
> +	info[7] = 0;
> +
> +	/*
> +	 * PB5 - Depending on the video format, this byte will contain
> +	 * either the HDMI_VIC code in buts 7:0, OR the 3D_Structure in
> +	 * bits 7:4.
> +	 */
> +	info[2] = 0x06 - 2;
> +	info[8] = 0;
> +	info[9] = 0;
> +
> +	info[3] = info[0] + info[1] + info[2];
> +
> +	/* Calculate info frame checKsum */
> +	for (i = 4; i < HDMI_SIZE_VSI_INFOFRAME; i++)
> +		info[3] += info[i];
> +	info[3] = 0x100 - info[3];
> +
> +	for (i = 0; i < HDMI_SIZE_VSI_INFOFRAME; i++)
> +		hdmi_writeb(hdmi, HDMI_CONTROL_PACKET_ADDR + i, info[i]);
> +
> +	hdmi_modb(hdmi, HDMI_PACKET_SEND_AUTO, m_PACKET_VSI_EN,
> +		  v_PACKET_VSI_EN(1));
> +
> +	return 0;

hdmi_vendor_infoframe_init / hdmi_vendor_infoframe_pack?

You can probably use the same function to upload the control packet
too - something like:

static int inno_hdmi_upload_frame(struct inno_hdmi *hdmi, int setup_rc,
	union hdmi_infoframe *frame, u32 mask, u32 disable, u32 enable)
{
	if (mask)
		hdmi_modb(hdmi, HDMI_PACKET_SEND_AUTO, mask, disable);

	if (setup_rc >= 0) {
		u8 packed_frame[YOUR_MAXIMUM_INFO_FRAME_SIZE];
		ssize_t rc, i;

		rc = hdmi_infoframe_pack(frame, packed_frame,
					 sizeof(packed_frame));
		if (rc < 0)
			return rc;

		for (i = 0; i < rc; i++)
			hdmi_writeb(hdmi, HDMI_CONTROL_PACKET_ADDR + i, buf[i]);

		if (mask)
			hdmi_modb(hdmi, HDMI_PACKET_SEND_AUTO, mask, enable);
	}

	return setup_rc;
}

static int inno_hdmi_config_video_vsi(struct inno_hdmi *hdmi)
{
	union hdmi_infoframe frame;

	rc = drm_hdmi_vendor_infoframe_from_display_mode(&frame.vendor.hdmi,
							 the_drm_display_mode);

	return inno_hdmi_upload_frame(hdmi, rc, &frame, m_PACKET_VSI_EN,
				      v_PACKET_VSI_EN(0), v_PACKET_VSI_EN(1));
}

> +static int inno_hdmi_i2c_wait(struct inno_hdmi *hdmi)
> +{
> +	struct inno_hdmi_i2c *i2c = hdmi->i2c;
> +	int stat;
> +
> +	stat = wait_for_completion_timeout(&i2c->cmp, HZ / 10);
> +	if (!stat) {
> +		stat = wait_for_completion_timeout(&i2c->cmp, HZ / 10);
> +		if (!stat)
> +			return -EAGAIN;

What's the reason for this double wait_for_completion?  This probably
needs a comment, otherwise it looks like some weird cut-n-paste error.

> +static int inno_hdmi_i2c_write(struct inno_hdmi *hdmi, struct i2c_msg *msgs)
> +{
> +	struct inno_hdmi_i2c *i2c = hdmi->i2c;

You seem to have a local i2c pointer...

> +
> +	/*
> +	 * The DDC module only support read EDID message, so
> +	 * we assume that each word write to this i2c adapter
> +	 * should be the offset of EDID word address.
> +	 */
> +	if ((msgs->len != 1) ||
> +	    ((msgs->addr != DDC_ADDR) && (msgs->addr != DDC_SEGMENT_ADDR)))
> +		return -EINVAL;
> +
> +	reinit_completion(&i2c->cmp);
> +
> +	if (msgs->addr == DDC_SEGMENT_ADDR)
> +		hdmi->i2c->segment_addr = msgs->buf[0];
> +	if (msgs->addr == DDC_ADDR)
> +		hdmi->i2c->ddc_addr = msgs->buf[0];
> +
> +	/* Set edid fifo first addr */
> +	hdmi_writeb(hdmi, HDMI_EDID_FIFO_OFFSET, 0x00);
> +
> +	/* Set edid word address 0x00/0x80 */
> +	hdmi_writeb(hdmi, HDMI_EDID_WORD_ADDR, hdmi->i2c->ddc_addr);
> +
> +	/* Set edid segment pointer */
> +	hdmi_writeb(hdmi, HDMI_EDID_SEGMENT_POINTER, hdmi->i2c->segment_addr);

but then you don't use it in the four locations above.


-- 
RMK's Patch system: http://www.arm.linux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ