linux-kernel - Re: [PATCH] mmc: dw_mmc-rockchip: add pinctrl support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <569E18E4.7050509@rock-chips.com>
Date:	Tue, 19 Jan 2016 19:07:16 +0800
From:	Shawn Lin <shawn.lin@...k-chips.com>
To:	Heiko Stuebner <heiko@...ech.de>
Cc:	shawn.lin@...k-chips.com, Jaehoon Chung <jh80.chung@...sung.com>,
	Ulf Hansson <ulf.hansson@...aro.org>,
	linux-mmc@...r.kernel.org, linux-kernel@...r.kernel.org,
	wxt@...k-chips.com
Subject: Re: [PATCH] mmc: dw_mmc-rockchip: add pinctrl support

On 2016/1/19 18:07, Heiko Stuebner wrote:
> Hi Shawn,
>
> Am Dienstag, 19. Januar 2016, 17:52:45 schrieb Shawn Lin:
>> We find rk3368 fail to enumerate sd card since
>> the default state is gpio function. Meahwhile, lots of
>> rockchip platform dts file assign pinctrl to dw_mmc but actually
>> dw_mmc never use it. Fortunately, those platforms' default io
>> state is sdmmc function, but no always right for all.
>>
>> Cc: Heiko Stuebner <heiko@...ech.de>
>> Signed-off-by: Shawn Lin <shawn.lin@...k-chips.com>
>
> I do believe any issue you see, must come from somewhere else, because the
> driver-core does in drivers/base/dd.c really_probe():
> 	pinctrl_bind_pins()

yes, pinctrl_bind_pins does turn pinctrl state. But I try debug a little
more and seems somewhere else switch the state before dw_mmc probe. Now 
I *guess* that may relate to our ATF or MCU firmware since rk3368's 
sdmmc io can also be used as mcu_jtag for system debug. I need to double 
check that point, thanks.

Hi Caesar,
does your patch able to consider adding SDMMC/CPU_JTAG/MCU_JTAG 
managment for rk3368 as well?

> which in turn already does the needed pinctrl state handling.
>
> So that default-state should be set up even before the dwmmc probe function
> is called.
>
> The sharing between sdmmc and uart2 pins is the same on the rk3036 and so
> far Caesar seems to have been able to switch the pin-state to sdmmc without
> touching the dw_mmc driver itself.
>
>
> Heiko
>
>
>> ---
>>
>>   drivers/mmc/host/dw_mmc-rockchip.c | 15 +++++++++++++++
>>   1 file changed, 15 insertions(+)
>>
>> diff --git a/drivers/mmc/host/dw_mmc-rockchip.c
>> b/drivers/mmc/host/dw_mmc-rockchip.c index d9c92f3..308b424 100644
>> --- a/drivers/mmc/host/dw_mmc-rockchip.c
>> +++ b/drivers/mmc/host/dw_mmc-rockchip.c
>> @@ -9,6 +9,7 @@
>>
>>   #include <linux/module.h>
>>   #include <linux/platform_device.h>
>> +#include <linux/pinctrl/consumer.h>
>>   #include <linux/clk.h>
>>   #include <linux/mmc/host.h>
>>   #include <linux/mmc/dw_mmc.h>
>> @@ -21,6 +22,8 @@
>>   #define RK3288_CLKGEN_DIV       2
>>
>>   struct dw_mci_rockchip_priv_data {
>> +	struct pinctrl		*pinctrl;
>> +	struct pinctrl_state	*pins_default;
>>   	struct clk		*drv_clk;
>>   	struct clk		*sample_clk;
>>   	int			default_sample_phase;
>> @@ -78,6 +81,10 @@ static void dw_mci_rk3288_set_ios(struct dw_mci *host,
>> struct mmc_ios *ios) /* Make sure we use phases which we can enumerate
>> with */
>>   	if (!IS_ERR(priv->sample_clk))
>>   		clk_set_phase(priv->sample_clk, priv->default_sample_phase);
>> +
>> +	/* Make sure we use correct pinctrl which we can enumerate with */
>> +	if (!IS_ERR(priv->pinctrl) && !IS_ERR(priv->pins_default))
>> +		pinctrl_select_state(priv->pinctrl, priv->pins_default);
>>   }
>>
>>   #define NUM_PHASES			360
>> @@ -223,6 +230,14 @@ static int dw_mci_rk3288_parse_dt(struct dw_mci
>> *host) if (IS_ERR(priv->sample_clk))
>>   		dev_dbg(host->dev, "ciu_sample not available\n");
>>
>> +	priv->pinctrl = devm_pinctrl_get(host->dev);
>> +	if (!IS_ERR(priv->pinctrl)) {
>> +		priv->pins_default = pinctrl_lookup_state(priv->pinctrl,
>> +							  "default");
>> +		if (IS_ERR(priv->pins_default))
>> +			dev_dbg(host->dev, "pinctrl not available\n");
>> +	}
>> +
>>   	host->priv = priv;
>>
>>   	return 0;
>
>
>
>


-- 
Best Regards
Shawn Lin