| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <56A110F7.2020509@oracle.com>
Date: Thu, 21 Jan 2016 11:10:15 -0600
From: Babu Moger <babu.moger@...cle.com>
To: Jordan_Hargrave@...l.com, bhelgaas@...gle.com
Cc: linux-pci@...r.kernel.org, linux-kernel@...r.kernel.org,
alexander.duyck@...il.com, hare@...e.de, mkubecek@...e.com,
shane.seymour@....com, myron.stowe@...il.com
Subject: Re: [PATCH RFC] pci: Blacklist vpd access for buggy devices
On 1/21/2016 9:47 AM, Jordan_Hargrave@...l.com wrote:
>> From: Babu Moger [babu.moger@...cle.com]
>> Sent: Tuesday, January 19, 2016 2:39 PM
>> To: Hargrave, Jordan; bhelgaas@...gle.com
>> Cc: linux-pci@...r.kernel.org; linux-kernel@...r.kernel.org; alexander.duyck@...il.com; hare@...e.de; mkubecek@...e.com; shane.seymour@....com; myron.stowe@...il.com
>> Subject: Re: [PATCH RFC] pci: Blacklist vpd access for buggy devices
>>
>> Hi Jordan,
>>
>> On 1/19/2016 9:22 AM, Jordan_Hargrave@...l.com wrote:
>>> From: Babu Moger [babu.moger@...cle.com]
>>> Sent: Monday, January 11, 2016 4:49 PM
>>> To: bhelgaas@...gle.com
>>> Cc: linux-pci@...r.kernel.org; linux-kernel@...r.kernel.org; alexander.duyck@...il.com; hare@...e.de; mkubecek@...e.com; shane.seymour@....com; myron.stowe@...il.com; VenkatKumar.Duvvuru@...go.com; Hargrave, Jordan
>>> Subject: Re: [PATCH RFC] pci: Blacklist vpd access for buggy devices
>>>
>>> Sorry. Missed Jordan.
>>>
>>> On 1/11/2016 3:13 PM, Babu Moger wrote:
>>>> Reading or Writing of PCI VPD data causes system panic.
>>>> We saw this problem by running "lspci -vvv" in the beginning.
>>>> However this can be easily reproduced by running
>>>> cat /sys/bus/devices/XX../vpd
>>>>
>>>> VPD length has been set as 32768 by default. Accessing vpd
>>>> will trigger read/write of 32k. This causes problem as we
>>>> could read data beyond the VPD end tag. Behaviour is un-
>>>> predictable when this happens. I see some other adapter doing
>>>> similar quirks(commit bffadffd43d4 ("PCI: fix VPD limit quirk
>>>> for Broadcom 5708S"))
>>>>
>>>> I see there is an attempt to fix this right way.
>>>> https://patchwork.ozlabs.org/patch/534843/ or
>>>> https://lkml.org/lkml/2015/10/23/97
>>>>
>>>> Tried to fix it this way, but problem is I dont see the proper
>>>> start/end TAGs(at least for this adapter) at all. The data is
>>>> mostly junk or zeros. This patch fixes the issue by setting the
>>>> vpd length to 0x80.
>>>>
>>>> Also look at the threds
>>>>
>>>> https://lkml.org/lkml/2015/11/10/557
>>>> https://lkml.org/lkml/2015/12/29/315
>>>>
>>>> Signed-off-by: Babu Moger <babu.moger@...cle.com>
>>>> ---
>>>>
>>>> NOTE:
>>>> Jordan, Are you sure all the devices in PCI_VENDOR_ID_ATHEROS and
>>>> PCI_VENDOR_ID_ATTANSIC have this problem. You have used PCI_ANY_ID.
>>>> I felt it is too broad. Can you please check.
>>>>
>>>
>>> I don't actually have that hardware, it was a bugfix for biosdevname for RedHat. We were getting
>>> 'BUG: soft lockup - CPU#0 stuck for 23s!' when attempting to read the vpd area.
>>>
>>> Certainly 0x1969:0x1026 experienced this.
>>
>> Ok. Thanks. I will update the patch 4/4.
>>
>
> Thanks! I also found 1969:2062. Maybe best to just block everything in drivers/net/ethernet/atheros/xxxx
Ok. I will update the patch..
>
> atl1c:
> static const struct pci_device_id atl1c_pci_tbl[] = {
> {PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATTANSIC_L1C)},
> {PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATTANSIC_L2C)},
> {PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATHEROS_L2C_B)},
> {PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATHEROS_L2C_B2)},
> {PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATHEROS_L1D)},
> {PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATHEROS_L1D_2_0)},
> /* required last entry */
> { 0 }
> };
>
> atl1e
> static const struct pci_device_id atl1e_pci_tbl[] = {
> {PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATTANSIC_L1E)},
> {PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, 0x1066)},
> /* required last entry */
> { 0 }
> };
>
>>>
>>> 09:00.0 Ethernet controller: Atheros Communications AR8121/AR8113/AR8114 Gigabit or Fast Ethernet (rev b0)
>>> Subsystem: Atheros Communications AR8121/AR8113/AR8114 Gigabit or Fast Ethernet
>>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>>> Latency: 0, Cache Line Size: 64 bytes
>>> Interrupt: pin A routed to IRQ 46
>>> Region 0: Memory at c0300000 (64-bit, non-prefetchable) [size=256K]
>>> Region 2: I/O ports at 3000 [size=128]
>>> Capabilities: [40] Power Management version 2
>>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
>>> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>>> Capabilities: [48] MSI: Enable+ Count=1/1 Maskable- 64bit+
>>> Address: 00000000fee0300c Data: 41a1
>>> Capabilities: [58] Express (v1) Endpoint, MSI 00
>>> DevCap: MaxPayload 4096 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
>>> ExtTag- AttnBtn+ AttnInd+ PwrInd+ RBE- FLReset-
>>> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>>> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>>> MaxPayload 128 bytes, MaxReadReq 512 bytes
>>> DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-
>>> LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 unlimited, L1 unlimited
>>> ClockPM- Surprise- LLActRep- BwNot-
>>> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
>>> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>>> LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>>> Capabilities: [6c] Vital Product Data
>>> Unknown small resource type 0b, will not decode more.
>>> Capabilities: [100 v1] Advanced Error Reporting
>>> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
>>> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>>> UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
>>> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
>>> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
>>> AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
>>> Capabilities: [180 v1] Device Serial Number ff-2e-05-c3-00-23-8b-ff
>>> Kernel driver in use: ATL1E
>>> 00: 69 19 26 10 07 04 10 00 b0 00 00 02 10 00 00 00
>>> 10: 04 00 30 c0 00 00 00 00 01 30 00 00 00 00 00 00
>>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 69 19 26 10
>>> 30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 01 00 00
>>> 40: 01 48 02 c0 00 00 00 00 05 58 81 00 0c 30 e0 fe
>>> 50: 00 00 00 00 a1 41 00 00 10 6c 01 00 85 7f 04 05
>>> 60: 00 20 1a 00 11 f4 03 00 40 00 11 10 03 00 00 80
>>> 70: 5a ff 88 14 00 00 00 00 00 00 00 00 00 00 00 00
>>> 80: 00 00 00 00 69 19 26 10 00 00 00 00 00 00 00 00
>>> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>>
>>>> drivers/pci/quirks.c | 41 +++++++++++++++++++++++++++++++++++++++++
>>>> 1 files changed, 41 insertions(+), 0 deletions(-)
>>>>
>>>> diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
>>>> index b03373f..8abcee5 100644
>>>> --- a/drivers/pci/quirks.c
>>>> +++ b/drivers/pci/quirks.c
>>>> @@ -2123,6 +2123,47 @@ static void quirk_via_cx700_pci_parking_caching(struct pci_dev *dev)
>>>> DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, 0x324e, quirk_via_cx700_pci_parking_caching);
>>>>
>>>> /*
>>>> + * A read/write to sysfs entry ('/sys/bus/pci/devices/<id>/vpd')
>>>> + * will dump 32k of data. The default length is set as 32768.
>>>> + * Reading a full 32k will cause an access beyond the VPD end tag.
>>>> + * The system behaviour at that point is mostly unpredictable.
>>>> + * Apparently, some vendors have not implemented this VPD headers properly.
>>>> + * Adding a generic function disable vpd data for these buggy adapters
>>>> + * Add the DECLARE_PCI_FIXUP_FINAL line below with the specific with
>>>> + * vendor and device of interest to use this quirk.
>>>> + */
>>>> +static void quirk_blacklist_vpd(struct pci_dev *dev)
>>>> +{
>>>> + if (dev->vpd) {
>>>> + dev->vpd->len = 0;
>>>> + dev_warn(&dev->dev, "PCI vpd access has been disabled due to firmware bug\n");
>>>> + }
>>>> +}
>>>> +
>>>> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0060,
>>>> + quirk_blacklist_vpd);
>>>> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x007c,
>>>> + quirk_blacklist_vpd);
>>>> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0413,
>>>> + quirk_blacklist_vpd);
>>>> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0078,
>>>> + quirk_blacklist_vpd);
>>>> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0079,
>>>> + quirk_blacklist_vpd);
>>>> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0073,
>>>> + quirk_blacklist_vpd);
>>>> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0071,
>>>> + quirk_blacklist_vpd);
>>>> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x005b,
>>>> + quirk_blacklist_vpd);
>>>> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x002f,
>>>> + quirk_blacklist_vpd);
>>>> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x005d,
>>>> + quirk_blacklist_vpd);
>>>> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x005f,
>>>> + quirk_blacklist_vpd);
>>>> +
>>>> +/*
>>>> * For Broadcom 5706, 5708, 5709 rev. A nics, any read beyond the
>>>> * VPD end tag will hang the device. This problem was initially
>>>> * observed when a vpd entry was created in sysfs
>>>>
>>
>
Powered by blists - more mailing lists