lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1453448584-9854-1-git-send-email-shawn.lin@rock-chips.com>
Date:	Fri, 22 Jan 2016 15:43:04 +0800
From:	Shawn Lin <shawn.lin@...k-chips.com>
To:	Jaehoon Chung <jh80.chung@...sung.com>,
	Ulf Hansson <ulf.hansson@...aro.org>
Cc:	linux-mmc@...r.kernel.org, linux-kernel@...r.kernel.org,
	Shawn Lin <shawn.lin@...k-chips.com>
Subject: [PATCH] mmc: dw_mmc: fix num_slots setting

This patch make num_slots to 1 if pdata->num_slot is not
defined. Meanwhile, we need to make sure num_slots should
not larger that the supported slots

Signed-off-by: Shawn Lin <shawn.lin@...k-chips.com>
---

 drivers/mmc/host/dw_mmc.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 7128351..065a8f5 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -2949,12 +2949,6 @@ int dw_mci_probe(struct dw_mci *host)
 		}
 	}
 
-	if (host->pdata->num_slots < 1) {
-		dev_err(host->dev,
-			"Platform data must supply num_slots.\n");
-		return -ENODEV;
-	}
-
 	host->biu_clk = devm_clk_get(host->dev, "biu");
 	if (IS_ERR(host->biu_clk)) {
 		dev_dbg(host->dev, "biu clock not available\n");
@@ -3111,7 +3105,15 @@ int dw_mci_probe(struct dw_mci *host)
 	if (host->pdata->num_slots)
 		host->num_slots = host->pdata->num_slots;
 	else
-		host->num_slots = SDMMC_GET_SLOT_NUM(mci_readl(host, HCON));
+		host->num_slots = 1;
+
+	if (host->num_slots < 1 ||
+	    host->num_slots > SDMMC_GET_SLOT_NUM(mci_readl(host, HCON))) {
+		dev_err(host->dev,
+			"Platform data must supply correct num_slots.\n");
+		ret = -ENODEV;
+		goto err_clk_ciu;
+	}
 
 	/*
 	 * Enable interrupts for command done, data over, data empty,
-- 
2.3.7


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ