| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1453427689-23785-1-git-send-email-ykk@rock-chips.com>
Date: Fri, 22 Jan 2016 09:54:49 +0800
From: Yakir Yang <ykk@...k-chips.com>
To: Inki Dae <inki.dae@...sung.com>,
Kyungmin Park <kyungmin.park@...sung.com>,
Jingoo Han <jingoohan1@...il.com>,
Thierry Reding <treding@...dia.com>,
Krzysztof Kozlowski <k.kozlowski@...sung.com>,
Rob Herring <robh+dt@...nel.org>,
Heiko Stuebner <heiko@...ech.de>,
Mark Yao <mark.yao@...k-chips.com>
Cc: Russell King <linux@....linux.org.uk>, emil.l.velikov@...il.com,
Gustavo Padovan <gustavo.padovan@...labora.co.uk>,
Kishon Vijay Abraham I <kishon@...com>,
javier@....samsung.com, Andy Yan <andy.yan@...k-chips.com>,
dri-devel@...ts.freedesktop.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-samsung-soc@...r.kernel.org,
linux-rockchip@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org,
Yakir Yang <ykk@...k-chips.com>
Subject: [PATCH v13 03/17] drm: bridge: analogix/dp: remove duplicate configuration of link rate and link count
link_rate and lane_count already configured in analogix_dp_set_link_train(),
so we don't need to config those repeatly after training finished, just
remove them out.
Beside Display Port 1.2 already support 5.4Gbps link rate, the maximum sets
would change from {1.62Gbps, 2.7Gbps} to {1.62Gbps, 2.7Gbps, 5.4Gbps}.
Signed-off-by: Yakir Yang <ykk@...k-chips.com>
Tested-by: Javier Martinez Canillas <javier@....samsung.com>
---
Changes in v13: None
Changes in v12:
- Remove the enum link_rate_type struct, using the marcos in drm_dp_helper.h (Jingoo)
Changes in v11: None
Changes in v10: None
Changes in v9: None
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4:
- Update commit message more readable. (Jingoo)
- Adjust the order from 05 to 04
Changes in v3:
- The link_rate and lane_count shouldn't config to the DT property value
directly, but we can take those as hardware limite. For example, RK3288
only support 4 physical lanes of 2.7/1.62 Gbps/lane, so DT property would
like "link-rate = 0x0a" "lane-count = 4". (Thierry)
Changes in v2: None
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 14 +++++++-------
drivers/gpu/drm/bridge/analogix/analogix_dp_core.h | 7 +------
drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 2 +-
3 files changed, 9 insertions(+), 14 deletions(-)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index 6901a6f..b948636 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -627,6 +627,8 @@ static void analogix_dp_get_max_rx_bandwidth(struct analogix_dp_device *dp,
/*
* For DP rev.1.1, Maximum link rate of Main Link lanes
* 0x06 = 1.62 Gbps, 0x0a = 2.7 Gbps
+ * For DP rev.1.2, Maximum link rate of Main Link lanes
+ * 0x06 = 1.62 Gbps, 0x0a = 2.7 Gbps, 0x14 = 5.4Gbps
*/
analogix_dp_read_byte_from_dpcd(dp, DP_MAX_LINK_RATE, &data);
*bandwidth = data;
@@ -647,7 +649,7 @@ static void analogix_dp_get_max_rx_lane_count(struct analogix_dp_device *dp,
static void analogix_dp_init_training(struct analogix_dp_device *dp,
enum link_lane_count_type max_lane,
- enum link_rate_type max_rate)
+ int max_rate)
{
/*
* MACRO_RST must be applied after the PLL_LOCK to avoid
@@ -659,11 +661,12 @@ static void analogix_dp_init_training(struct analogix_dp_device *dp,
analogix_dp_get_max_rx_bandwidth(dp, &dp->link_train.link_rate);
analogix_dp_get_max_rx_lane_count(dp, &dp->link_train.lane_count);
- if ((dp->link_train.link_rate != LINK_RATE_1_62GBPS) &&
- (dp->link_train.link_rate != LINK_RATE_2_70GBPS)) {
+ if ((dp->link_train.link_rate != DP_LINK_BW_1_62) &&
+ (dp->link_train.link_rate != DP_LINK_BW_2_7) &&
+ (dp->link_train.link_rate != DP_LINK_BW_5_4)) {
dev_err(dp->dev, "Rx Max Link Rate is abnormal :%x !\n",
dp->link_train.link_rate);
- dp->link_train.link_rate = LINK_RATE_1_62GBPS;
+ dp->link_train.link_rate = DP_LINK_BW_1_62;
}
if (dp->link_train.lane_count == 0) {
@@ -901,9 +904,6 @@ static void analogix_dp_commit(struct analogix_dp_device *dp)
analogix_dp_enable_rx_to_enhanced_mode(dp, 1);
analogix_dp_enable_enhanced_mode(dp, 1);
- analogix_dp_set_lane_count(dp, dp->video_info->lane_count);
- analogix_dp_set_link_bandwidth(dp, dp->video_info->link_rate);
-
analogix_dp_init_video(dp);
ret = analogix_dp_config_video(dp);
if (ret)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
index f7dfc8e..911642e 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
@@ -20,11 +20,6 @@
#define MAX_CR_LOOP 5
#define MAX_EQ_LOOP 5
-enum link_rate_type {
- LINK_RATE_1_62GBPS = 0x06,
- LINK_RATE_2_70GBPS = 0x0a
-};
-
enum link_lane_count_type {
LANE_COUNT1 = 1,
LANE_COUNT2 = 2,
@@ -128,7 +123,7 @@ struct video_info {
enum color_coefficient ycbcr_coeff;
enum color_depth color_depth;
- enum link_rate_type link_rate;
+ int link_rate;
enum link_lane_count_type lane_count;
};
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
index a388c0a..eb0b63c 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
@@ -855,7 +855,7 @@ void analogix_dp_set_link_bandwidth(struct analogix_dp_device *dp, u32 bwtype)
u32 reg;
reg = bwtype;
- if ((bwtype == LINK_RATE_2_70GBPS) || (bwtype == LINK_RATE_1_62GBPS))
+ if ((bwtype == DP_LINK_BW_2_7) || (bwtype == DP_LINK_BW_1_62))
writel(reg, dp->reg_base + ANALOGIX_DP_LINK_BW_SET);
}
--
1.9.1
Powered by blists - more mailing lists