| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 26 Jan 2016 02:47:15 +0800
From: John Garry <john.garry@...wei.com>
To: <JBottomley@...n.com>, <martin.petersen@...cle.com>,
<robh+dt@...nel.org>, <pawel.moll@....com>, <mark.rutland@....com>,
<ijc+devicetree@...lion.org.uk>, <galak@...eaurora.org>
CC: <linuxarm@...wei.com>, <zhangfei.gao@...aro.org>,
<xuwei5@...ilicon.com>, <john.garry2@...l.dcu.ie>,
<linux-scsi@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<arnd@...db.de>, <devicetree@...r.kernel.org>,
John Garry <john.garry@...wei.com>
Subject: [RESEND PATCH v2 15/23] hisi_sas: add v2 SATA interrupt handler
Signed-off-by: John Garry <john.garry@...wei.com>
---
drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 100 +++++++++++++++++++++++++++++++++
1 file changed, 100 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index 5af2069..c4a887c 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -861,6 +861,86 @@ static irqreturn_t int_chnl_int_v2_hw(int irq_no, void *p)
return IRQ_HANDLED;
}
+static irqreturn_t sata_int_v2_hw(int irq_no, void *p)
+{
+ struct hisi_sas_phy *phy = p;
+ struct hisi_hba *hisi_hba = phy->hisi_hba;
+ struct asd_sas_phy *sas_phy = &phy->sas_phy;
+ struct device *dev = &hisi_hba->pdev->dev;
+ struct hisi_sas_initial_fis *initial_fis;
+ struct dev_to_host_fis *fis;
+ u32 ent_tmp, ent_msk, ent_int, port_id, link_rate, hard_phy_linkrate;
+ irqreturn_t res = IRQ_HANDLED;
+ u8 attached_sas_addr[SAS_ADDR_SIZE] = {0};
+ int phy_no;
+
+ phy_no = sas_phy->id;
+ initial_fis = &hisi_hba->initial_fis[phy_no];
+ fis = &initial_fis->fis;
+
+ ent_msk = hisi_sas_read32(hisi_hba, ENT_INT_SRC_MSK1);
+ hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK1, ent_msk | 1 << phy_no);
+
+ ent_int = hisi_sas_read32(hisi_hba, ENT_INT_SRC1);
+ ent_tmp = ent_int;
+ ent_int >>= ENT_INT_SRC1_D2H_FIS_CH1_OFF * (phy_no % 4);
+ if ((ent_int & ENT_INT_SRC1_D2H_FIS_CH0_MSK) == 0) {
+ dev_warn(dev, "sata int: phy%d did not receive FIS\n", phy_no);
+ hisi_sas_write32(hisi_hba, ENT_INT_SRC1, ent_tmp);
+ hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK1, ent_msk);
+ res = IRQ_NONE;
+ goto end;
+ }
+
+ if (unlikely(phy_no == 8)) {
+ u32 port_state = hisi_sas_read32(hisi_hba, PORT_STATE);
+
+ port_id = (port_state & PORT_STATE_PHY8_PORT_NUM_MSK) >>
+ PORT_STATE_PHY8_PORT_NUM_OFF;
+ link_rate = (port_state & PORT_STATE_PHY8_CONN_RATE_MSK) >>
+ PORT_STATE_PHY8_CONN_RATE_OFF;
+ } else {
+ port_id = hisi_sas_read32(hisi_hba, PHY_PORT_NUM_MA);
+ port_id = (port_id >> (4 * phy_no)) & 0xf;
+ link_rate = hisi_sas_read32(hisi_hba, PHY_CONN_RATE);
+ link_rate = (link_rate >> (phy_no * 4)) & 0xf;
+ }
+
+ if (port_id == 0xf) {
+ dev_err(dev, "sata int: phy%d invalid portid\n", phy_no);
+ res = IRQ_NONE;
+ goto end;
+ }
+
+ sas_phy->linkrate = link_rate;
+ hard_phy_linkrate = hisi_sas_phy_read32(hisi_hba, phy_no,
+ HARD_PHY_LINKRATE);
+ phy->maximum_linkrate = hard_phy_linkrate & 0xf;
+ phy->minimum_linkrate = (hard_phy_linkrate >> 4) & 0xf;
+
+ sas_phy->oob_mode = SATA_OOB_MODE;
+ /* Make up some unique SAS address */
+ attached_sas_addr[0] = 0x50;
+ attached_sas_addr[7] = phy_no;
+ memcpy(sas_phy->attached_sas_addr, attached_sas_addr, SAS_ADDR_SIZE);
+ memcpy(sas_phy->frame_rcvd, fis, sizeof(struct dev_to_host_fis));
+ dev_info(dev, "sata int phyup: phy%d link_rate=%d\n", phy_no, link_rate);
+ phy->phy_type &= ~(PORT_TYPE_SAS | PORT_TYPE_SATA);
+ phy->port_id = port_id;
+ phy->phy_type |= PORT_TYPE_SATA;
+ phy->phy_attached = 1;
+ phy->identify.device_type = SAS_SATA_DEV;
+ phy->frame_rcvd_size = sizeof(struct dev_to_host_fis);
+ phy->identify.target_port_protocols = SAS_PROTOCOL_SATA;
+ queue_work(hisi_hba->wq, &phy->phyup_ws);
+
+end:
+ hisi_sas_write32(hisi_hba, ENT_INT_SRC1, ent_tmp);
+ hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK1, ent_msk);
+
+ return res;
+}
+
static irq_handler_t phy_interrupts[HISI_SAS_PHY_INT_NR] = {
int_phy_updown_v2_hw,
int_chnl_int_v2_hw,
@@ -900,6 +980,26 @@ static int interrupt_init_v2_hw(struct hisi_hba *hisi_hba)
}
}
+ for (i = 0; i < hisi_hba->n_phy; i++) {
+ struct hisi_sas_phy *phy = &hisi_hba->phy[i];
+ int idx = i + 72; /* First SATA interrupt is irq72 */
+
+ irq = irq_map[idx];
+ if (!irq) {
+ dev_err(dev, "irq init: fail map phy interrupt %d\n",
+ idx);
+ return -ENOENT;
+ }
+
+ rc = devm_request_irq(dev, irq, sata_int_v2_hw, 0,
+ DRV_NAME " sata", phy);
+ if (rc) {
+ dev_err(dev, "irq init: could not request "
+ "sata interrupt %d, rc=%d\n",
+ irq, rc);
+ return -ENOENT;
+ }
+ }
return 0;
}
--
1.9.1
Powered by blists - more mailing lists