[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1453747643-61875-10-git-send-email-john.garry@huawei.com>
Date: Tue, 26 Jan 2016 02:47:09 +0800
From: John Garry <john.garry@...wei.com>
To: <JBottomley@...n.com>, <martin.petersen@...cle.com>,
<robh+dt@...nel.org>, <pawel.moll@....com>, <mark.rutland@....com>,
<ijc+devicetree@...lion.org.uk>, <galak@...eaurora.org>
CC: <linuxarm@...wei.com>, <zhangfei.gao@...aro.org>,
<xuwei5@...ilicon.com>, <john.garry2@...l.dcu.ie>,
<linux-scsi@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<arnd@...db.de>, <devicetree@...r.kernel.org>,
John Garry <john.garry@...wei.com>
Subject: [RESEND PATCH v2 09/23] hisi_sas: add v2 hw init
Add code to initialise the hardware.
Support is also added to deal with the
"am-max-transmissions" (amt) limitation in hip06
controller #1. This is how many connection requests
we can send on the system bus before waiting for a
response.
Due to chip bus design, controller #1 is limited to
32 amt, while, by design, a controller supports 64.
The default value for the nibbles in the relevant
registers is 0x40; these need to be programmed with
0x20.
Signed-off-by: John Garry <john.garry@...wei.com>
---
drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 288 +++++++++++++++++++++++++++++++++
1 file changed, 288 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index 31e4fdc..da9c375 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -249,7 +249,295 @@
#define ITCT_HDR_RTOLT_OFF 48
#define ITCT_HDR_RTOLT_MSK (0xffffULL << ITCT_HDR_RTOLT_OFF)
+struct hisi_sas_complete_v2_hdr {
+ __le32 dw0;
+ __le32 dw1;
+ __le32 act;
+ __le32 dw3;
+};
+
+#define HISI_SAS_COMMAND_ENTRIES_V2_HW 4096
+
+static u32 hisi_sas_read32(struct hisi_hba *hisi_hba, u32 off)
+{
+ void __iomem *regs = hisi_hba->regs + off;
+
+ return readl(regs);
+}
+
+static void hisi_sas_write32(struct hisi_hba *hisi_hba, u32 off, u32 val)
+{
+ void __iomem *regs = hisi_hba->regs + off;
+
+ writel(val, regs);
+}
+
+static void hisi_sas_phy_write32(struct hisi_hba *hisi_hba, int phy_no,
+ u32 off, u32 val)
+{
+ void __iomem *regs = hisi_hba->regs + (0x400 * phy_no) + off;
+
+ writel(val, regs);
+}
+
+static u32 hisi_sas_phy_read32(struct hisi_hba *hisi_hba,
+ int phy_no, u32 off)
+{
+ void __iomem *regs = hisi_hba->regs + (0x400 * phy_no) + off;
+
+ return readl(regs);
+}
+
+static int reset_hw_v2_hw(struct hisi_hba *hisi_hba)
+{
+ int i, reset_val;
+ u32 val;
+ unsigned long end_time;
+ struct device *dev = &hisi_hba->pdev->dev;
+
+ /* The mask needs to be set depending on the number of phys */
+ if (hisi_hba->n_phy == 9)
+ reset_val = 0x1fffff;
+ else
+ reset_val = 0x7ffff;
+
+ /* Disable all of the DQ */
+ for (i = 0; i < HISI_SAS_MAX_QUEUES; i++)
+ hisi_sas_write32(hisi_hba, DLVRY_QUEUE_ENABLE, 0);
+
+ /* Disable all of the PHYs */
+ for (i = 0; i < hisi_hba->n_phy; i++) {
+ u32 phy_cfg = hisi_sas_phy_read32(hisi_hba, i, PHY_CFG);
+
+ phy_cfg &= ~PHY_CTRL_RESET_MSK;
+ hisi_sas_phy_write32(hisi_hba, i, PHY_CFG, phy_cfg);
+ }
+ udelay(50);
+
+ /* Ensure DMA tx & rx idle */
+ for (i = 0; i < hisi_hba->n_phy; i++) {
+ u32 dma_tx_status, dma_rx_status;
+
+ end_time = jiffies + msecs_to_jiffies(1000);
+
+ while (1) {
+ dma_tx_status = hisi_sas_phy_read32(hisi_hba, i,
+ DMA_TX_STATUS);
+ dma_rx_status = hisi_sas_phy_read32(hisi_hba, i,
+ DMA_RX_STATUS);
+
+ if (!(dma_tx_status & DMA_TX_STATUS_BUSY_MSK) &&
+ !(dma_rx_status & DMA_RX_STATUS_BUSY_MSK))
+ break;
+
+ msleep(20);
+ if (time_after(jiffies, end_time))
+ return -EIO;
+ }
+ }
+
+ /* Ensure axi bus idle */
+ end_time = jiffies + msecs_to_jiffies(1000);
+ while (1) {
+ u32 axi_status =
+ hisi_sas_read32(hisi_hba, AXI_CFG);
+
+ if (axi_status == 0)
+ break;
+
+ msleep(20);
+ if (time_after(jiffies, end_time))
+ return -EIO;
+ }
+
+ /* reset and disable clock*/
+ regmap_write(hisi_hba->ctrl, hisi_hba->ctrl_reset_reg,
+ reset_val);
+ regmap_write(hisi_hba->ctrl, hisi_hba->ctrl_clock_ena_reg + 4,
+ reset_val);
+ msleep(1);
+ regmap_read(hisi_hba->ctrl, hisi_hba->ctrl_reset_sts_reg, &val);
+ if (reset_val != (val & reset_val)) {
+ dev_err(dev, "SAS reset fail.\n");
+ return -EIO;
+ }
+
+ /* De-reset and enable clock*/
+ regmap_write(hisi_hba->ctrl, hisi_hba->ctrl_reset_reg + 4,
+ reset_val);
+ regmap_write(hisi_hba->ctrl, hisi_hba->ctrl_clock_ena_reg,
+ reset_val);
+ msleep(1);
+ regmap_read(hisi_hba->ctrl, hisi_hba->ctrl_reset_sts_reg,
+ &val);
+ if (val & reset_val) {
+ dev_err(dev, "SAS de-reset fail.\n");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static void init_reg_v2_hw(struct hisi_hba *hisi_hba)
+{
+ struct device *dev = &hisi_hba->pdev->dev;
+ struct device_node *np = dev->of_node;
+ int i;
+
+ /* Global registers init */
+
+ /* Deal with am-max-transmissions quirk */
+ if (of_get_property(np, "hip06-sas-v2-quirk-amt", NULL)) {
+ hisi_sas_write32(hisi_hba, AM_CFG_MAX_TRANS, 0x2020);
+ hisi_sas_write32(hisi_hba, AM_CFG_SINGLE_PORT_MAX_TRANS,
+ 0x2020);
+ } /* Else, use defaults -> do nothing */
+
+ hisi_sas_write32(hisi_hba, DLVRY_QUEUE_ENABLE,
+ (u32)((1ULL << hisi_hba->queue_count) - 1));
+ hisi_sas_write32(hisi_hba, AXI_USER1, 0xc0000000);
+ hisi_sas_write32(hisi_hba, AXI_USER2, 0x10000);
+ hisi_sas_write32(hisi_hba, HGC_SAS_TXFAIL_RETRY_CTRL, 0x108);
+ hisi_sas_write32(hisi_hba, HGC_SAS_TX_OPEN_FAIL_RETRY_CTRL, 0x7FF);
+ hisi_sas_write32(hisi_hba, OPENA_WT_CONTI_TIME, 0x1);
+ hisi_sas_write32(hisi_hba, I_T_NEXUS_LOSS_TIME, 0x1F4);
+ hisi_sas_write32(hisi_hba, MAX_CON_TIME_LIMIT_TIME, 0x4E20);
+ hisi_sas_write32(hisi_hba, BUS_INACTIVE_LIMIT_TIME, 0x1);
+ hisi_sas_write32(hisi_hba, CFG_AGING_TIME, 0x1);
+ hisi_sas_write32(hisi_hba, HGC_ERR_STAT_EN, 0x1);
+ hisi_sas_write32(hisi_hba, HGC_GET_ITV_TIME, 0x1);
+ hisi_sas_write32(hisi_hba, INT_COAL_EN, 0x1);
+ hisi_sas_write32(hisi_hba, OQ_INT_COAL_TIME, 0x1);
+ hisi_sas_write32(hisi_hba, OQ_INT_COAL_CNT, 0x1);
+ hisi_sas_write32(hisi_hba, ENT_INT_COAL_TIME, 0x1);
+ hisi_sas_write32(hisi_hba, ENT_INT_COAL_CNT, 0x1);
+ hisi_sas_write32(hisi_hba, OQ_INT_SRC, 0x0);
+ hisi_sas_write32(hisi_hba, ENT_INT_SRC1, 0xffffffff);
+ hisi_sas_write32(hisi_hba, ENT_INT_SRC2, 0xffffffff);
+ hisi_sas_write32(hisi_hba, ENT_INT_SRC3, 0xffffffff);
+ hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK1, 0x7efefefe);
+ hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK2, 0x7efefefe);
+ hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK3, 0x7ffffffe);
+ hisi_sas_write32(hisi_hba, SAS_ECC_INTR_MSK, 0xfffff3c0);
+ for (i = 0; i < hisi_hba->queue_count; i++)
+ hisi_sas_write32(hisi_hba, OQ0_INT_SRC_MSK+0x4*i, 0);
+
+ hisi_sas_write32(hisi_hba, AXI_AHB_CLK_CFG, 1);
+ hisi_sas_write32(hisi_hba, HYPER_STREAM_ID_EN_CFG, 1);
+
+ for (i = 0; i < hisi_hba->n_phy; i++) {
+ hisi_sas_phy_write32(hisi_hba, i, PROG_PHY_LINK_RATE, 0x855);
+ hisi_sas_phy_write32(hisi_hba, i, SAS_PHY_CTRL, 0x30b9908);
+ hisi_sas_phy_write32(hisi_hba, i, SL_TOUT_CFG, 0x7d7d7d7d);
+ hisi_sas_phy_write32(hisi_hba, i, DONE_RECEIVED_TIME, 0x10);
+ hisi_sas_phy_write32(hisi_hba, i, CHL_INT0, 0xffffffff);
+ hisi_sas_phy_write32(hisi_hba, i, CHL_INT1, 0xffffffff);
+ hisi_sas_phy_write32(hisi_hba, i, CHL_INT2, 0xffffffff);
+ hisi_sas_phy_write32(hisi_hba, i, RXOP_CHECK_CFG_H, 0x1000);
+ hisi_sas_phy_write32(hisi_hba, i, CHL_INT1_MSK, 0xffffffff);
+ hisi_sas_phy_write32(hisi_hba, i, CHL_INT2_MSK, 0x8ffffbff);
+ hisi_sas_phy_write32(hisi_hba, i, SL_CFG, 0x23f801fc);
+ hisi_sas_phy_write32(hisi_hba, i, PHY_CTRL_RDY_MSK, 0x0);
+ hisi_sas_phy_write32(hisi_hba, i, PHYCTRL_NOT_RDY_MSK, 0x0);
+ hisi_sas_phy_write32(hisi_hba, i, PHYCTRL_DWS_RESET_MSK, 0x0);
+ hisi_sas_phy_write32(hisi_hba, i, PHYCTRL_PHY_ENA_MSK, 0x0);
+ hisi_sas_phy_write32(hisi_hba, i, SL_RX_BCAST_CHK_MSK, 0x0);
+ hisi_sas_phy_write32(hisi_hba, i, CHL_INT_COAL_EN, 0x0);
+ hisi_sas_phy_write32(hisi_hba, i, PHYCTRL_OOB_RESTART_MSK, 0x0);
+ hisi_sas_phy_write32(hisi_hba, i, PHY_CTRL, 0x199B694);
+ }
+
+ for (i = 0; i < hisi_hba->queue_count; i++) {
+ /* Delivery queue */
+ hisi_sas_write32(hisi_hba,
+ DLVRY_Q_0_BASE_ADDR_HI + (i * 0x14),
+ upper_32_bits(hisi_hba->cmd_hdr_dma[i]));
+
+ hisi_sas_write32(hisi_hba, DLVRY_Q_0_BASE_ADDR_LO + (i * 0x14),
+ lower_32_bits(hisi_hba->cmd_hdr_dma[i]));
+
+ hisi_sas_write32(hisi_hba, DLVRY_Q_0_DEPTH + (i * 0x14),
+ HISI_SAS_QUEUE_SLOTS);
+
+ /* Completion queue */
+ hisi_sas_write32(hisi_hba, COMPL_Q_0_BASE_ADDR_HI + (i * 0x14),
+ upper_32_bits(hisi_hba->complete_hdr_dma[i]));
+
+ hisi_sas_write32(hisi_hba, COMPL_Q_0_BASE_ADDR_LO + (i * 0x14),
+ lower_32_bits(hisi_hba->complete_hdr_dma[i]));
+
+ hisi_sas_write32(hisi_hba, COMPL_Q_0_DEPTH + (i * 0x14),
+ HISI_SAS_QUEUE_SLOTS);
+ }
+
+ /* itct */
+ hisi_sas_write32(hisi_hba, ITCT_BASE_ADDR_LO,
+ lower_32_bits(hisi_hba->itct_dma));
+
+ hisi_sas_write32(hisi_hba, ITCT_BASE_ADDR_HI,
+ upper_32_bits(hisi_hba->itct_dma));
+
+ /* iost */
+ hisi_sas_write32(hisi_hba, IOST_BASE_ADDR_LO,
+ lower_32_bits(hisi_hba->iost_dma));
+
+ hisi_sas_write32(hisi_hba, IOST_BASE_ADDR_HI,
+ upper_32_bits(hisi_hba->iost_dma));
+
+ /* breakpoint */
+ hisi_sas_write32(hisi_hba, IO_BROKEN_MSG_ADDR_LO,
+ lower_32_bits(hisi_hba->breakpoint_dma));
+
+ hisi_sas_write32(hisi_hba, IO_BROKEN_MSG_ADDR_HI,
+ upper_32_bits(hisi_hba->breakpoint_dma));
+
+ /* SATA broken msg */
+ hisi_sas_write32(hisi_hba, IO_SATA_BROKEN_MSG_ADDR_LO,
+ lower_32_bits(hisi_hba->sata_breakpoint_dma));
+
+ hisi_sas_write32(hisi_hba, IO_SATA_BROKEN_MSG_ADDR_HI,
+ upper_32_bits(hisi_hba->sata_breakpoint_dma));
+
+ /* SATA initial fis */
+ hisi_sas_write32(hisi_hba, SATA_INITI_D2H_STORE_ADDR_LO,
+ lower_32_bits(hisi_hba->initial_fis_dma));
+
+ hisi_sas_write32(hisi_hba, SATA_INITI_D2H_STORE_ADDR_HI,
+ upper_32_bits(hisi_hba->initial_fis_dma));
+}
+
+static int hw_init_v2_hw(struct hisi_hba *hisi_hba)
+{
+ struct device *dev = &hisi_hba->pdev->dev;
+ int rc;
+
+ rc = reset_hw_v2_hw(hisi_hba);
+ if (rc) {
+ dev_err(dev, "hisi_sas_reset_hw failed, rc=%d", rc);
+ return rc;
+ }
+
+ msleep(100);
+ init_reg_v2_hw(hisi_hba);
+
+ return 0;
+}
+
+static int hisi_sas_v2_init(struct hisi_hba *hisi_hba)
+{
+ int rc;
+
+ rc = hw_init_v2_hw(hisi_hba);
+ if (rc)
+ return rc;
+
+ return 0;
+}
+
static const struct hisi_sas_hw hisi_sas_v2_hw = {
+ .hw_init = hisi_sas_v2_init,
+ .max_command_entries = HISI_SAS_COMMAND_ENTRIES_V2_HW,
+ .complete_hdr_size = sizeof(struct hisi_sas_complete_v2_hdr),
};
static int hisi_sas_v2_probe(struct platform_device *pdev)
--
1.9.1
Powered by blists - more mailing lists