| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1453727747-23307-7-git-send-email-wens@csie.org>
Date: Mon, 25 Jan 2016 21:15:42 +0800
From: Chen-Yu Tsai <wens@...e.org>
To: Maxime Ripard <maxime.ripard@...e-electrons.com>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...eaurora.org>
Cc: Chen-Yu Tsai <wens@...e.org>, linux-clk@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Vishnu Patekar <vishnupatekar0510@...il.com>,
linux-sunxi@...glegroups.com
Subject: [PATCH RFC 06/11] clk: sunxi: factors: Consolidate get_factors parameters into a struct
The .get_factors callback of factors_clk has 6 parameters. To extend
factors_clk in any way that requires adding parameters to .get_factors
would make that list even longer, not to mention changing all the
function declarations.
Do this once now and consolidate all the parameters into a struct.
Also drop the space before function pointer arguments, since checkpatch
complains.
Signed-off-by: Chen-Yu Tsai <wens@...e.org>
---
drivers/clk/sunxi/clk-factors.c | 24 ++--
drivers/clk/sunxi/clk-factors.h | 13 ++-
drivers/clk/sunxi/clk-mod0.c | 20 ++--
drivers/clk/sunxi/clk-sun8i-mbus.c | 18 +--
drivers/clk/sunxi/clk-sun9i-core.c | 77 +++++--------
drivers/clk/sunxi/clk-sunxi.c | 222 +++++++++++++++----------------------
6 files changed, 155 insertions(+), 219 deletions(-)
diff --git a/drivers/clk/sunxi/clk-factors.c b/drivers/clk/sunxi/clk-factors.c
index b464ca4a232e..47b7d918b74c 100644
--- a/drivers/clk/sunxi/clk-factors.c
+++ b/drivers/clk/sunxi/clk-factors.c
@@ -73,8 +73,13 @@ static long clk_factors_round_rate(struct clk_hw *hw, unsigned long rate,
unsigned long *parent_rate)
{
struct clk_factors *factors = to_clk_factors(hw);
- factors->get_factors((u32 *)&rate, (u32)*parent_rate,
- NULL, NULL, NULL, NULL);
+ struct factors_request req = {
+ .rate = rate,
+ .parent_rate = *parent_rate,
+ };
+
+ factors->get_factors(&req);
+
return rate;
}
@@ -120,13 +125,16 @@ static int clk_factors_determine_rate(struct clk_hw *hw,
static int clk_factors_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
- u8 n = 0, k = 0, m = 0, p = 0;
+ struct factors_request req = {
+ .rate = rate,
+ .parent_rate = parent_rate,
+ };
u32 reg;
struct clk_factors *factors = to_clk_factors(hw);
const struct clk_factors_config *config = factors->config;
unsigned long flags = 0;
- factors->get_factors((u32 *)&rate, (u32)parent_rate, &n, &k, &m, &p);
+ factors->get_factors(&req);
if (factors->lock)
spin_lock_irqsave(factors->lock, flags);
@@ -135,10 +143,10 @@ static int clk_factors_set_rate(struct clk_hw *hw, unsigned long rate,
reg = readl(factors->reg);
/* Set up the new factors - macros do not do anything if width is 0 */
- reg = FACTOR_SET(config->nshift, config->nwidth, reg, n);
- reg = FACTOR_SET(config->kshift, config->kwidth, reg, k);
- reg = FACTOR_SET(config->mshift, config->mwidth, reg, m);
- reg = FACTOR_SET(config->pshift, config->pwidth, reg, p);
+ reg = FACTOR_SET(config->nshift, config->nwidth, reg, req.n);
+ reg = FACTOR_SET(config->kshift, config->kwidth, reg, req.k);
+ reg = FACTOR_SET(config->mshift, config->mwidth, reg, req.m);
+ reg = FACTOR_SET(config->pshift, config->pwidth, reg, req.p);
/* Apply them now */
writel(reg, factors->reg);
diff --git a/drivers/clk/sunxi/clk-factors.h b/drivers/clk/sunxi/clk-factors.h
index 7ea1379a7cda..f09d7c214533 100644
--- a/drivers/clk/sunxi/clk-factors.h
+++ b/drivers/clk/sunxi/clk-factors.h
@@ -19,12 +19,21 @@ struct clk_factors_config {
u8 n_start;
};
+struct factors_request {
+ unsigned long rate;
+ unsigned long parent_rate;
+ u8 n;
+ u8 k;
+ u8 m;
+ u8 p;
+};
+
struct factors_data {
int enable;
int mux;
int muxmask;
const struct clk_factors_config *table;
- void (*getter) (u32 *rate, u32 parent_rate, u8 *n, u8 *k, u8 *m, u8 *p);
+ void (*getter)(struct factors_request *req);
const char *name;
};
@@ -32,7 +41,7 @@ struct clk_factors {
struct clk_hw hw;
void __iomem *reg;
const struct clk_factors_config *config;
- void (*get_factors) (u32 *rate, u32 parent, u8 *n, u8 *k, u8 *m, u8 *p);
+ void (*get_factors)(struct factors_request *req);
spinlock_t *lock;
/* for cleanup */
struct clk_mux *mux;
diff --git a/drivers/clk/sunxi/clk-mod0.c b/drivers/clk/sunxi/clk-mod0.c
index c67fea1a128d..578bff0dd251 100644
--- a/drivers/clk/sunxi/clk-mod0.c
+++ b/drivers/clk/sunxi/clk-mod0.c
@@ -28,17 +28,16 @@
* rate = (parent_rate >> p) / (m + 1);
*/
-static void sun4i_a10_get_mod0_factors(u32 *freq, u32 parent_rate,
- u8 *n, u8 *k, u8 *m, u8 *p)
+static void sun4i_a10_get_mod0_factors(struct factors_request *req)
{
u8 div, calcm, calcp;
/* These clocks can only divide, so we will never be able to achieve
* frequencies higher than the parent frequency */
- if (*freq > parent_rate)
- *freq = parent_rate;
+ if (req->rate > req->parent_rate)
+ req->rate = req->parent_rate;
- div = DIV_ROUND_UP(parent_rate, *freq);
+ div = DIV_ROUND_UP(req->parent_rate, req->rate);
if (div < 16)
calcp = 0;
@@ -51,14 +50,9 @@ static void sun4i_a10_get_mod0_factors(u32 *freq, u32 parent_rate,
calcm = DIV_ROUND_UP(div, 1 << calcp);
- *freq = (parent_rate >> calcp) / calcm;
-
- /* we were called to round the frequency, we can now return */
- if (n == NULL)
- return;
-
- *m = calcm - 1;
- *p = calcp;
+ req->rate = (req->parent_rate >> calcp) / calcm;
+ req->m = calcm - 1;
+ req->p = calcp;
}
/* user manual says "n" but it's really "p" */
diff --git a/drivers/clk/sunxi/clk-sun8i-mbus.c b/drivers/clk/sunxi/clk-sun8i-mbus.c
index bf117a636d23..78683f02a37d 100644
--- a/drivers/clk/sunxi/clk-sun8i-mbus.c
+++ b/drivers/clk/sunxi/clk-sun8i-mbus.c
@@ -26,8 +26,7 @@
* rate = parent_rate / (m + 1);
*/
-static void sun8i_a23_get_mbus_factors(u32 *freq, u32 parent_rate,
- u8 *n, u8 *k, u8 *m, u8 *p)
+static void sun8i_a23_get_mbus_factors(struct factors_request *req)
{
u8 div;
@@ -35,21 +34,16 @@ static void sun8i_a23_get_mbus_factors(u32 *freq, u32 parent_rate,
* These clocks can only divide, so we will never be able to
* achieve frequencies higher than the parent frequency
*/
- if (*freq > parent_rate)
- *freq = parent_rate;
+ if (req->rate > req->parent_rate)
+ req->rate = req->parent_rate;
- div = DIV_ROUND_UP(parent_rate, *freq);
+ div = DIV_ROUND_UP(req->parent_rate, req->rate);
if (div > 8)
div = 8;
- *freq = parent_rate / div;
-
- /* we were called to round the frequency, we can now return */
- if (m == NULL)
- return;
-
- *m = div - 1;
+ req->rate = req->parent_rate / div;
+ req->m = div - 1;
}
static struct clk_factors_config sun8i_a23_mbus_config = {
diff --git a/drivers/clk/sunxi/clk-sun9i-core.c b/drivers/clk/sunxi/clk-sun9i-core.c
index 37c85caaef88..a81211062ecb 100644
--- a/drivers/clk/sunxi/clk-sun9i-core.c
+++ b/drivers/clk/sunxi/clk-sun9i-core.c
@@ -32,15 +32,14 @@
* p and m are named div1 and div2 in Allwinner's SDK
*/
-static void sun9i_a80_get_pll4_factors(u32 *freq, u32 parent_rate,
- u8 *n_ret, u8 *k, u8 *m_ret, u8 *p_ret)
+static void sun9i_a80_get_pll4_factors(struct factors_request *req)
{
int n;
int m = 1;
int p = 1;
/* Normalize value to a 6 MHz multiple (24 MHz / 4) */
- n = DIV_ROUND_UP(*freq, 6000000);
+ n = DIV_ROUND_UP(req->rate, 6000000);
/* If n is too large switch to steps of 12 MHz */
if (n > 255) {
@@ -60,15 +59,10 @@ static void sun9i_a80_get_pll4_factors(u32 *freq, u32 parent_rate,
else if (n < 12)
n = 12;
- *freq = ((24000000 * n) >> p) / (m + 1);
-
- /* we were called to round the frequency, we can now return */
- if (n_ret == NULL)
- return;
-
- *n_ret = n;
- *m_ret = m;
- *p_ret = p;
+ req->rate = ((24000000 * n) >> p) / (m + 1);
+ req->n = n;
+ req->m = m;
+ req->p = p;
}
static const struct clk_factors_config sun9i_a80_pll4_config = {
@@ -111,27 +105,21 @@ CLK_OF_DECLARE(sun9i_a80_pll4, "allwinner,sun9i-a80-pll4-clk", sun9i_a80_pll4_se
* rate = parent_rate / (m + 1);
*/
-static void sun9i_a80_get_gt_factors(u32 *freq, u32 parent_rate,
- u8 *n, u8 *k, u8 *m, u8 *p)
+static void sun9i_a80_get_gt_factors(struct factors_request *req)
{
u32 div;
- if (parent_rate < *freq)
- *freq = parent_rate;
+ if (req->parent_rate < req->rate)
+ req->rate = req->parent_rate;
- div = DIV_ROUND_UP(parent_rate, *freq);
+ div = DIV_ROUND_UP(req->parent_rate, req->rate);
/* maximum divider is 4 */
if (div > 4)
div = 4;
- *freq = parent_rate / div;
-
- /* we were called to round the frequency, we can now return */
- if (!m)
- return;
-
- *m = div;
+ req->rate = req->parent_rate / div;
+ req->m = div;
}
static const struct clk_factors_config sun9i_a80_gt_config = {
@@ -176,27 +164,21 @@ CLK_OF_DECLARE(sun9i_a80_gt, "allwinner,sun9i-a80-gt-clk", sun9i_a80_gt_setup);
* rate = parent_rate >> p;
*/
-static void sun9i_a80_get_ahb_factors(u32 *freq, u32 parent_rate,
- u8 *n, u8 *k, u8 *m, u8 *p)
+static void sun9i_a80_get_ahb_factors(struct factors_request *req)
{
u32 _p;
- if (parent_rate < *freq)
- *freq = parent_rate;
+ if (req->parent_rate < req->rate)
+ req->rate = req->parent_rate;
- _p = order_base_2(DIV_ROUND_UP(parent_rate, *freq));
+ _p = order_base_2(DIV_ROUND_UP(req->parent_rate, req->rate));
/* maximum p is 3 */
if (_p > 3)
_p = 3;
- *freq = parent_rate >> _p;
-
- /* we were called to round the frequency, we can now return */
- if (!p)
- return;
-
- *p = _p;
+ req->rate = req->parent_rate >> _p;
+ req->p = _p;
}
static const struct clk_factors_config sun9i_a80_ahb_config = {
@@ -262,31 +244,22 @@ CLK_OF_DECLARE(sun9i_a80_apb0, "allwinner,sun9i-a80-apb0-clk", sun9i_a80_apb0_se
* rate = (parent_rate >> p) / (m + 1);
*/
-static void sun9i_a80_get_apb1_factors(u32 *freq, u32 parent_rate,
- u8 *n, u8 *k, u8 *m, u8 *p)
+static void sun9i_a80_get_apb1_factors(struct factors_request *req)
{
u32 div;
- u8 calcm, calcp;
- if (parent_rate < *freq)
- *freq = parent_rate;
+ if (req->parent_rate < req->rate)
+ req->rate = req->parent_rate;
- div = DIV_ROUND_UP(parent_rate, *freq);
+ div = DIV_ROUND_UP(req->parent_rate, req->rate);
/* Highest possible divider is 256 (p = 3, m = 31) */
if (div > 256)
div = 256;
- calcp = order_base_2(div);
- calcm = (parent_rate >> calcp) - 1;
- *freq = (parent_rate >> calcp) / (calcm + 1);
-
- /* we were called to round the frequency, we can now return */
- if (n == NULL)
- return;
-
- *m = calcm;
- *p = calcp;
+ req->p = order_base_2(div);
+ req->m = (req->parent_rate >> req->p) - 1;
+ req->rate = (req->parent_rate >> req->p) / (req->m + 1);
}
static const struct clk_factors_config sun9i_a80_apb1_config = {
diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
index 5dd927859bc2..56d4fdcf9c89 100644
--- a/drivers/clk/sunxi/clk-sunxi.c
+++ b/drivers/clk/sunxi/clk-sunxi.c
@@ -246,49 +246,45 @@ CLK_OF_DECLARE(sun6i_a31_ahb1, "allwinner,sun6i-a31-ahb1-clk", sun6i_ahb1_clk_se
* parent_rate is always 24Mhz
*/
-static void sun4i_get_pll1_factors(u32 *freq, u32 parent_rate,
- u8 *n, u8 *k, u8 *m, u8 *p)
+static void sun4i_get_pll1_factors(struct factors_request *req)
{
u8 div;
/* Normalize value to a 6M multiple */
- div = *freq / 6000000;
- *freq = 6000000 * div;
-
- /* we were called to round the frequency, we can now return */
- if (n == NULL)
- return;
+ div = req->rate / 6000000;
+ req->rate = 6000000 * div;
/* m is always zero for pll1 */
- *m = 0;
+ req->m = 0;
/* k is 1 only on these cases */
- if (*freq >= 768000000 || *freq == 42000000 || *freq == 54000000)
- *k = 1;
+ if (req->rate >= 768000000 || req->rate == 42000000 ||
+ req->rate == 54000000)
+ req->k = 1;
else
- *k = 0;
+ req->k = 0;
/* p will be 3 for divs under 10 */
if (div < 10)
- *p = 3;
+ req->p = 3;
/* p will be 2 for divs between 10 - 20 and odd divs under 32 */
else if (div < 20 || (div < 32 && (div & 1)))
- *p = 2;
+ req->p = 2;
/* p will be 1 for even divs under 32, divs under 40 and odd pairs
* of divs between 40-62 */
else if (div < 40 || (div < 64 && (div & 2)))
- *p = 1;
+ req->p = 1;
/* any other entries have p = 0 */
else
- *p = 0;
+ req->p = 0;
/* calculate a suitable n based on k and p */
- div <<= *p;
- div /= (*k + 1);
- *n = div / 4;
+ div <<= req->p;
+ div /= (req->k + 1);
+ req->n = div / 4;
}
/**
@@ -297,15 +293,14 @@ static void sun4i_get_pll1_factors(u32 *freq, u32 parent_rate,
* rate = parent_rate * (n + 1) * (k + 1) / (m + 1);
* parent_rate should always be 24MHz
*/
-static void sun6i_a31_get_pll1_factors(u32 *freq, u32 parent_rate,
- u8 *n, u8 *k, u8 *m, u8 *p)
+static void sun6i_a31_get_pll1_factors(struct factors_request *req)
{
/*
* We can operate only on MHz, this will make our life easier
* later.
*/
- u32 freq_mhz = *freq / 1000000;
- u32 parent_freq_mhz = parent_rate / 1000000;
+ u32 freq_mhz = req->rate / 1000000;
+ u32 parent_freq_mhz = req->parent_rate / 1000000;
/*
* Round down the frequency to the closest multiple of either
@@ -319,28 +314,20 @@ static void sun6i_a31_get_pll1_factors(u32 *freq, u32 parent_rate,
else
freq_mhz = round_freq_16;
- *freq = freq_mhz * 1000000;
-
- /*
- * If the factors pointer are null, we were just called to
- * round down the frequency.
- * Exit.
- */
- if (n == NULL)
- return;
+ req->rate = freq_mhz * 1000000;
/* If the frequency is a multiple of 32 MHz, k is always 3 */
if (!(freq_mhz % 32))
- *k = 3;
+ req->k = 3;
/* If the frequency is a multiple of 9 MHz, k is always 2 */
else if (!(freq_mhz % 9))
- *k = 2;
+ req->k = 2;
/* If the frequency is a multiple of 8 MHz, k is always 1 */
else if (!(freq_mhz % 8))
- *k = 1;
+ req->k = 1;
/* Otherwise, we don't use the k factor */
else
- *k = 0;
+ req->k = 0;
/*
* If the frequency is a multiple of 2 but not a multiple of
@@ -351,27 +338,28 @@ static void sun6i_a31_get_pll1_factors(u32 *freq, u32 parent_rate,
* somehow relates to this frequency.
*/
if ((freq_mhz % 6) == 2 || (freq_mhz % 6) == 4)
- *m = 2;
+ req->m = 2;
/*
* If the frequency is a multiple of 6MHz, but the factor is
* odd, m will be 3
*/
else if ((freq_mhz / 6) & 1)
- *m = 3;
+ req->m = 3;
/* Otherwise, we end up with m = 1 */
else
- *m = 1;
+ req->m = 1;
/* Calculate n thanks to the above factors we already got */
- *n = freq_mhz * (*m + 1) / ((*k + 1) * parent_freq_mhz) - 1;
+ req->n = freq_mhz * (req->m + 1) / ((req->k + 1) * parent_freq_mhz)
+ - 1;
/*
* If n end up being outbound, and that we can still decrease
* m, do it.
*/
- if ((*n + 1) > 31 && (*m + 1) > 1) {
- *n = (*n + 1) / 2 - 1;
- *m = (*m + 1) / 2 - 1;
+ if ((req->n + 1) > 31 && (req->m + 1) > 1) {
+ req->n = (req->n + 1) / 2 - 1;
+ req->m = (req->m + 1) / 2 - 1;
}
}
@@ -382,45 +370,41 @@ static void sun6i_a31_get_pll1_factors(u32 *freq, u32 parent_rate,
* parent_rate is always 24Mhz
*/
-static void sun8i_a23_get_pll1_factors(u32 *freq, u32 parent_rate,
- u8 *n, u8 *k, u8 *m, u8 *p)
+static void sun8i_a23_get_pll1_factors(struct factors_request *req)
{
u8 div;
/* Normalize value to a 6M multiple */
- div = *freq / 6000000;
- *freq = 6000000 * div;
-
- /* we were called to round the frequency, we can now return */
- if (n == NULL)
- return;
+ div = req->rate / 6000000;
+ req->rate = 6000000 * div;
/* m is always zero for pll1 */
- *m = 0;
+ req->m = 0;
/* k is 1 only on these cases */
- if (*freq >= 768000000 || *freq == 42000000 || *freq == 54000000)
- *k = 1;
+ if (req->rate >= 768000000 || req->rate == 42000000 ||
+ req->rate == 54000000)
+ req->k = 1;
else
- *k = 0;
+ req->k = 0;
/* p will be 2 for divs under 20 and odd divs under 32 */
if (div < 20 || (div < 32 && (div & 1)))
- *p = 2;
+ req->p = 2;
/* p will be 1 for even divs under 32, divs under 40 and odd pairs
* of divs between 40-62 */
else if (div < 40 || (div < 64 && (div & 2)))
- *p = 1;
+ req->p = 1;
/* any other entries have p = 0 */
else
- *p = 0;
+ req->p = 0;
/* calculate a suitable n based on k and p */
- div <<= *p;
- div /= (*k + 1);
- *n = div / 4 - 1;
+ div <<= req->p;
+ div /= (req->k + 1);
+ req->n = div / 4 - 1;
}
/**
@@ -430,29 +414,24 @@ static void sun8i_a23_get_pll1_factors(u32 *freq, u32 parent_rate,
* parent_rate is always 24Mhz
*/
-static void sun4i_get_pll5_factors(u32 *freq, u32 parent_rate,
- u8 *n, u8 *k, u8 *m, u8 *p)
+static void sun4i_get_pll5_factors(struct factors_request *req)
{
u8 div;
/* Normalize value to a parent_rate multiple (24M) */
- div = *freq / parent_rate;
- *freq = parent_rate * div;
-
- /* we were called to round the frequency, we can now return */
- if (n == NULL)
- return;
+ div = req->rate / req->parent_rate;
+ req->rate = req->parent_rate * div;
if (div < 31)
- *k = 0;
+ req->k = 0;
else if (div / 2 < 31)
- *k = 1;
+ req->k = 1;
else if (div / 3 < 31)
- *k = 2;
+ req->k = 2;
else
- *k = 3;
+ req->k = 3;
- *n = DIV_ROUND_UP(div, (*k+1));
+ req->n = DIV_ROUND_UP(div, (req->k + 1));
}
/**
@@ -462,24 +441,19 @@ static void sun4i_get_pll5_factors(u32 *freq, u32 parent_rate,
* parent_rate is always 24Mhz
*/
-static void sun6i_a31_get_pll6_factors(u32 *freq, u32 parent_rate,
- u8 *n, u8 *k, u8 *m, u8 *p)
+static void sun6i_a31_get_pll6_factors(struct factors_request *req)
{
u8 div;
/* Normalize value to a parent_rate multiple (24M) */
- div = *freq / parent_rate;
- *freq = parent_rate * div;
+ div = req->rate / req->parent_rate;
+ req->rate = req->parent_rate * div;
- /* we were called to round the frequency, we can now return */
- if (n == NULL)
- return;
-
- *k = div / 32;
- if (*k > 3)
- *k = 3;
+ req->k = div / 32;
+ if (req->k > 3)
+ req->k = 3;
- *n = DIV_ROUND_UP(div, (*k+1)) - 1;
+ req->n = DIV_ROUND_UP(div, (req->k + 1)) - 1;
}
/**
@@ -488,37 +462,32 @@ static void sun6i_a31_get_pll6_factors(u32 *freq, u32 parent_rate,
* rate = parent_rate >> p
*/
-static void sun5i_a13_get_ahb_factors(u32 *freq, u32 parent_rate,
- u8 *n, u8 *k, u8 *m, u8 *p)
+static void sun5i_a13_get_ahb_factors(struct factors_request *req)
{
u32 div;
/* divide only */
- if (parent_rate < *freq)
- *freq = parent_rate;
+ if (req->parent_rate < req->rate)
+ req->rate = req->parent_rate;
/*
* user manual says valid speed is 8k ~ 276M, but tests show it
* can work at speeds up to 300M, just after reparenting to pll6
*/
- if (*freq < 8000)
- *freq = 8000;
- if (*freq > 300000000)
- *freq = 300000000;
+ if (req->rate < 8000)
+ req->rate = 8000;
+ if (req->rate > 300000000)
+ req->rate = 300000000;
- div = order_base_2(DIV_ROUND_UP(parent_rate, *freq));
+ div = order_base_2(DIV_ROUND_UP(req->parent_rate, req->rate));
/* p = 0 ~ 3 */
if (div > 3)
div = 3;
- *freq = parent_rate >> div;
+ req->rate = req->parent_rate >> div;
- /* we were called to round the frequency, we can now return */
- if (p == NULL)
- return;
-
- *p = div;
+ req->p = div;
}
/**
@@ -527,39 +496,34 @@ static void sun5i_a13_get_ahb_factors(u32 *freq, u32 parent_rate,
* rate = (parent_rate >> p) / (m + 1);
*/
-static void sun4i_get_apb1_factors(u32 *freq, u32 parent_rate,
- u8 *n, u8 *k, u8 *m, u8 *p)
+static void sun4i_get_apb1_factors(struct factors_request *req)
{
u8 calcm, calcp;
+ int div;
- if (parent_rate < *freq)
- *freq = parent_rate;
+ if (req->parent_rate < req->rate)
+ req->rate = req->parent_rate;
- parent_rate = DIV_ROUND_UP(parent_rate, *freq);
+ div = DIV_ROUND_UP(req->parent_rate, req->rate);
/* Invalid rate! */
- if (parent_rate > 32)
+ if (div > 32)
return;
- if (parent_rate <= 4)
+ if (div <= 4)
calcp = 0;
- else if (parent_rate <= 8)
+ else if (div <= 8)
calcp = 1;
- else if (parent_rate <= 16)
+ else if (div <= 16)
calcp = 2;
else
calcp = 3;
- calcm = (parent_rate >> calcp) - 1;
-
- *freq = (parent_rate >> calcp) / (calcm + 1);
+ calcm = (req->parent_rate >> calcp) - 1;
- /* we were called to round the frequency, we can now return */
- if (n == NULL)
- return;
-
- *m = calcm;
- *p = calcp;
+ req->rate = (req->parent_rate >> calcp) / (calcm + 1);
+ req->m = calcm;
+ req->p = calcp;
}
@@ -571,17 +535,16 @@ static void sun4i_get_apb1_factors(u32 *freq, u32 parent_rate,
* rate = (parent_rate >> p) / (m + 1);
*/
-static void sun7i_a20_get_out_factors(u32 *freq, u32 parent_rate,
- u8 *n, u8 *k, u8 *m, u8 *p)
+static void sun7i_a20_get_out_factors(struct factors_request *req)
{
u8 div, calcm, calcp;
/* These clocks can only divide, so we will never be able to achieve
* frequencies higher than the parent frequency */
- if (*freq > parent_rate)
- *freq = parent_rate;
+ if (req->rate > req->parent_rate)
+ req->rate = req->parent_rate;
- div = DIV_ROUND_UP(parent_rate, *freq);
+ div = DIV_ROUND_UP(req->parent_rate, req->rate);
if (div < 32)
calcp = 0;
@@ -594,14 +557,9 @@ static void sun7i_a20_get_out_factors(u32 *freq, u32 parent_rate,
calcm = DIV_ROUND_UP(div, 1 << calcp);
- *freq = (parent_rate >> calcp) / calcm;
-
- /* we were called to round the frequency, we can now return */
- if (n == NULL)
- return;
-
- *m = calcm - 1;
- *p = calcp;
+ req->rate = (req->parent_rate >> calcp) / calcm;
+ req->m = calcm - 1;
+ req->p = calcp;
}
/**
--
2.7.0
Powered by blists - more mailing lists