linux-kernel - [PATCH v7 06/10] usb: dbc: handle dbc-configured exit

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1453813096-6991-7-git-send-email-baolu.lu@linux.intel.com>
Date:	Tue, 26 Jan 2016 20:58:12 +0800
From:	Lu Baolu <baolu.lu@...ux.intel.com>
To:	Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc:	linux-usb@...r.kernel.org, linux-kernel@...r.kernel.org,
	Lu Baolu <baolu.lu@...ux.intel.com>
Subject: [PATCH v7 06/10] usb: dbc: handle dbc-configured exit

DbC might exit configured state in some cases (refer to 7.6.4.4 in
xHCI spec 1.1). Software needs detect and clear this situation by
clearing DCCTRL.DCR and wait until the DbC configured before read
or write oprations.

Signed-off-by: Lu Baolu <baolu.lu@...ux.intel.com>
---
 drivers/usb/early/xhci-dbc.c | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/drivers/usb/early/xhci-dbc.c b/drivers/usb/early/xhci-dbc.c
index f59c80ef..c81df40 100644
--- a/drivers/usb/early/xhci-dbc.c
+++ b/drivers/usb/early/xhci-dbc.c
@@ -1140,6 +1140,29 @@ static int xdbc_wait_until_bulk_done(struct xdbc_trb *trb, int loops)
 	return -EIO;
 }
 
+static int xdbc_wait_until_dbc_configured(void)
+{
+	int timeout = 0;
+	u32 reg;
+
+	/* Port exits configured state */
+	reg = readl(&xdbcp->xdbc_reg->control);
+	if (!(reg & CTRL_DRC))
+		return 0;
+
+	/* clear run change bit (RW1C) */
+	writel(reg | CTRL_DRC, &xdbcp->xdbc_reg->control);
+
+	do {
+		if (readl(&xdbcp->xdbc_reg->control) & CTRL_DCR)
+			return 0;
+
+		xdbc_udelay(10);
+	} while (timeout++ < XDBC_LOOPS);
+
+	return -ETIMEDOUT;
+}
+
 static int xdbc_bulk_transfer(void *data, int size, int loops, bool read)
 {
 	u64 addr;
@@ -1154,6 +1177,11 @@ static int xdbc_bulk_transfer(void *data, int size, int loops, bool read)
 		return -EINVAL;
 	}
 
+	if (xdbc_wait_until_dbc_configured()) {
+		xdbc_trace("%s: hardware not ready\n", __func__);
+		return -EPERM;
+	}
+
 	ring = (read ? &xdbcp->in_ring : &xdbcp->out_ring);
 	trb = ring->enqueue;
 	cycle = ring->cycle_state;
-- 
2.1.4