| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1453929121-12171-13-git-send-email-Suravee.Suthikulpanit@amd.com>
Date: Wed, 27 Jan 2016 15:12:00 -0600
From: Suravee Suthikulpanit <Suravee.Suthikulpanit@....com>
To: <robh+dt@...nel.org>, <pawel.moll@....com>, <mark.rutland@....com>,
<ijc+devicetree@...lion.org.uk>, <galak@...eaurora.org>,
<arnd@...db.de>
CC: <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>, <arm@...nel.org>,
<brijeshkumar.singh@....com>, <thomas.lendacky@....com>,
<leo.duran@....com>,
Suravee Suthikulpanit <suravee.suthikulpanit@....com>
Subject: [PATCH 12/13] dtb: amd: Add support for new AMD Overdrive boards
From: Suravee Suthikulpanit <suravee.suthikulpanit@....com>
Add device tree files for AMD Overdrive boards which comes with
AMD Seattle Revision B0 and B1 SOCs.
Signed-off-by: Tom Lendacky <thomas.lendacky@....com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@....com>
---
arch/arm64/boot/dts/amd/Makefile | 3 +-
arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts | 87 ++++++++++++++++++++++
arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts | 91 ++++++++++++++++++++++++
3 files changed, 180 insertions(+), 1 deletion(-)
create mode 100644 arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts
create mode 100644 arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts
diff --git a/arch/arm64/boot/dts/amd/Makefile b/arch/arm64/boot/dts/amd/Makefile
index cfdf701..db03293 100644
--- a/arch/arm64/boot/dts/amd/Makefile
+++ b/arch/arm64/boot/dts/amd/Makefile
@@ -1,4 +1,5 @@
-dtb-$(CONFIG_ARCH_SEATTLE) += amd-overdrive.dtb
+dtb-$(CONFIG_ARCH_SEATTLE) += amd-overdrive.dtb \
+ amd-overdrive-rev-b0.dtb amd-overdrive-rev-b1.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)
diff --git a/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts
new file mode 100644
index 0000000..8e3074a
--- /dev/null
+++ b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts
@@ -0,0 +1,87 @@
+/*
+ * DTS file for AMD Seattle Overdrive Development Board
+ * Note: For Seattle Rev.B0
+ *
+ * Copyright (C) 2015 Advanced Micro Devices, Inc.
+ */
+
+/dts-v1/;
+
+/include/ "amd-seattle-soc.dtsi"
+
+/ {
+ model = "AMD Seattle (Rev.B0) Development Board (Overdrive)";
+ compatible = "amd,seattle-overdrive", "amd,seattle";
+
+ chosen {
+ stdout-path = &serial0;
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+};
+
+&ccp0 {
+ status = "ok";
+ amd,zlib-support = <1>;
+};
+
+/**
+ * NOTE: In Rev.B, gpio0 is reserved.
+ */
+&gpio1 {
+ status = "ok";
+};
+
+&gpio2 {
+ status = "ok";
+};
+
+&gpio3 {
+ status = "ok";
+};
+
+&gpio4 {
+ status = "ok";
+};
+
+&i2c0 {
+ status = "ok";
+};
+
+&i2c1 {
+ status = "ok";
+};
+
+&pcie0 {
+ status = "ok";
+};
+
+&spi0 {
+ status = "ok";
+};
+
+&spi1 {
+ status = "ok";
+ sdcard0: sdcard@0 {
+ compatible = "mmc-spi-slot";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ voltage-ranges = <3200 3400>;
+ pl022,hierarchy = <0>;
+ pl022,interface = <0>;
+ pl022,com-mode = <0x0>;
+ pl022,rx-level-trig = <0>;
+ pl022,tx-level-trig = <0>;
+ };
+};
+
+&ipmi_kcs {
+ status = "ok";
+};
+
+&smb0 {
+ /include/ "amd-seattle-xgbe-b.dtsi"
+};
diff --git a/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts
new file mode 100644
index 0000000..ed5e043
--- /dev/null
+++ b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts
@@ -0,0 +1,91 @@
+/*
+ * DTS file for AMD Seattle Overdrive Development Board
+ * Note: For Seattle Rev.B1
+ *
+ * Copyright (C) 2015 Advanced Micro Devices, Inc.
+ */
+
+/dts-v1/;
+
+/include/ "amd-seattle-soc.dtsi"
+
+/ {
+ model = "AMD Seattle (Rev.B1) Development Board (Overdrive)";
+ compatible = "amd,seattle-overdrive", "amd,seattle";
+
+ chosen {
+ stdout-path = &serial0;
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+};
+
+&ccp0 {
+ status = "ok";
+ amd,zlib-support = <1>;
+};
+
+/**
+ * NOTE: In Rev.B, gpio0 is reserved.
+ */
+&gpio1 {
+ status = "ok";
+};
+
+&gpio2 {
+ status = "ok";
+};
+
+&gpio3 {
+ status = "ok";
+};
+
+&gpio4 {
+ status = "ok";
+};
+
+&i2c0 {
+ status = "ok";
+};
+
+&i2c1 {
+ status = "ok";
+};
+
+&pcie0 {
+ status = "ok";
+};
+
+&sata1 {
+ status = "ok";
+};
+
+&spi0 {
+ status = "ok";
+};
+
+&spi1 {
+ status = "ok";
+ sdcard0: sdcard@0 {
+ compatible = "mmc-spi-slot";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ voltage-ranges = <3200 3400>;
+ pl022,hierarchy = <0>;
+ pl022,interface = <0>;
+ pl022,com-mode = <0x0>;
+ pl022,rx-level-trig = <0>;
+ pl022,tx-level-trig = <0>;
+ };
+};
+
+&ipmi_kcs {
+ status = "ok";
+};
+
+&smb0 {
+ /include/ "amd-seattle-xgbe-b.dtsi"
+};
--
2.5.0
Powered by blists - more mailing lists