linux-kernel - [PATCH 1/2] ARM: dts: at91: sama5d4ek: add phy address and IRQ for macb0

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <1453889209-13742-1-git-send-email-nicolas.ferre@atmel.com>
Date:	Wed, 27 Jan 2016 11:06:48 +0100
From:	Nicolas Ferre <nicolas.ferre@...el.com>
To:	Alexandre Belloni <alexandre.belloni@...e-electrons.com>,
	<linux-arm-kernel@...ts.infradead.org>
CC:	Wenyou Yang <wenyou.yang@...el.com>,
	Ludovic Desroches <ludovic.desroches@...el.com>,
	<linux-kernel@...r.kernel.org>, <stable@...r.kernel.org>,
	Nicolas Ferre <nicolas.ferre@...el.com>
Subject: [PATCH 1/2] ARM: dts: at91: sama5d4ek: add phy address and IRQ for macb0

From: Wenyou Yang <wenyou.yang@...el.com>

On SAMA5D4EK board, the Ethernet doesn't work after resuming from the suspend
state.

Signed-off-by: Wenyou Yang <wenyou.yang@...el.com>
[nicolas.ferre@...el.com: adapt to newer kernel]
Fixes: 38153a017896 ("ARM: at91/dt: sama5d4: add dts for sama5d4 xplained board")
Cc: <stable@...r.kernel.org> # 4.1+
Signed-off-by: Nicolas Ferre <nicolas.ferre@...el.com>
---
 arch/arm/boot/dts/at91-sama5d4ek.dts | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts
index 2d4a33100af6..4e98cda97403 100644
--- a/arch/arm/boot/dts/at91-sama5d4ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d4ek.dts
@@ -160,8 +160,15 @@
 			};
 
 			macb0: ethernet@...20000 {
+				pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>;
 				phy-mode = "rmii";
 				status = "okay";
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+					interrupt-parent = <&pioE>;
+					interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+				};
 			};
 
 			mmc1: mmc@...00000 {
@@ -193,6 +200,10 @@
 
 			pinctrl@...6a000 {
 				board {
+					pinctrl_macb0_phy_irq: macb0_phy_irq {
+						atmel,pins =
+							<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
 					pinctrl_mmc0_cd: mmc0_cd {
 						atmel,pins =
 							<AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
-- 
2.1.3