| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-id: <20160127012034.GB14296@samsunx.samsung>
Date: Wed, 27 Jan 2016 10:20:34 +0900
From: Andi Shyti <andi.shyti@...sung.com>
To: Javier Martinez Canillas <javier@....samsung.com>
Cc: linux-kernel@...r.kernel.org, Kukjin Kim <kgene@...nel.org>,
rtc-linux@...glegroups.com, Chanwoo Choi <cw00.choi@...sung.com>,
Alexandre Belloni <alexandre.belloni@...e-electrons.com>,
Krzysztof Kozlowski <k.kozlowski@...sung.com>,
Laxman Dewangan <ldewangan@...dia.com>,
linux-samsung-soc@...r.kernel.org
Subject: Re: [PATCH v3 02/10] rtc: max77686: Use ARRAY_SIZE() instead of
current array length
On Tue, Jan 26, 2016 at 04:20:12PM -0300, Javier Martinez Canillas wrote:
> It is better to use the ARRAY_SIZE() macro instead of the array length
> to avoid bugs if the array is later changed and the length not updated.
>
> Signed-off-by: Javier Martinez Canillas <javier@....samsung.com>
> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@...sung.com>
> Tested-by: Krzysztof Kozlowski <k.kozlowski@...sung.com>
Reviewed-by: Andi Shyti <andi.shyti@...sung.com>
> ---
>
> Changes in v3:
> - Add Krzysztof Kozlowski's Tested-by tag to patch #2.
> - Add Laxman Dewangan's Acked-by tag to patch #2.
> - Use ARRAY_SIZE() in all places. Suggested by Laxman Dewangan.
>
> Changes in v2:
> - Add Krzysztof Kozlowski's Reviewed-by tag to patch #2.
>
> drivers/rtc/rtc-max77686.c | 23 ++++++++++++-----------
> 1 file changed, 12 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/rtc/rtc-max77686.c b/drivers/rtc/rtc-max77686.c
> index 6653c3d11b66..d84a50c9f7f7 100644
> --- a/drivers/rtc/rtc-max77686.c
> +++ b/drivers/rtc/rtc-max77686.c
> @@ -149,7 +149,7 @@ static int max77686_rtc_read_time(struct device *dev, struct rtc_time *tm)
> goto out;
>
> ret = regmap_bulk_read(info->max77686->rtc_regmap,
> - MAX77686_RTC_SEC, data, RTC_NR_TIME);
> + MAX77686_RTC_SEC, data, ARRAY_SIZE(data));
> if (ret < 0) {
> dev_err(info->dev, "%s: fail to read time reg(%d)\n", __func__, ret);
> goto out;
> @@ -177,7 +177,7 @@ static int max77686_rtc_set_time(struct device *dev, struct rtc_time *tm)
> mutex_lock(&info->lock);
>
> ret = regmap_bulk_write(info->max77686->rtc_regmap,
> - MAX77686_RTC_SEC, data, RTC_NR_TIME);
> + MAX77686_RTC_SEC, data, ARRAY_SIZE(data));
> if (ret < 0) {
> dev_err(info->dev, "%s: fail to write time reg(%d)\n", __func__,
> ret);
> @@ -205,7 +205,7 @@ static int max77686_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
> goto out;
>
> ret = regmap_bulk_read(info->max77686->rtc_regmap,
> - MAX77686_ALARM1_SEC, data, RTC_NR_TIME);
> + MAX77686_ALARM1_SEC, data, ARRAY_SIZE(data));
> if (ret < 0) {
> dev_err(info->dev, "%s:%d fail to read alarm reg(%d)\n",
> __func__, __LINE__, ret);
> @@ -215,7 +215,7 @@ static int max77686_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
> max77686_rtc_data_to_tm(data, &alrm->time, info->rtc_24hr_mode);
>
> alrm->enabled = 0;
> - for (i = 0; i < RTC_NR_TIME; i++) {
> + for (i = 0; i < ARRAY_SIZE(data); i++) {
> if (data[i] & ALARM_ENABLE_MASK) {
> alrm->enabled = 1;
> break;
> @@ -252,7 +252,7 @@ static int max77686_rtc_stop_alarm(struct max77686_rtc_info *info)
> goto out;
>
> ret = regmap_bulk_read(info->max77686->rtc_regmap,
> - MAX77686_ALARM1_SEC, data, RTC_NR_TIME);
> + MAX77686_ALARM1_SEC, data, ARRAY_SIZE(data));
> if (ret < 0) {
> dev_err(info->dev, "%s: fail to read alarm reg(%d)\n",
> __func__, ret);
> @@ -261,11 +261,11 @@ static int max77686_rtc_stop_alarm(struct max77686_rtc_info *info)
>
> max77686_rtc_data_to_tm(data, &tm, info->rtc_24hr_mode);
>
> - for (i = 0; i < RTC_NR_TIME; i++)
> + for (i = 0; i < ARRAY_SIZE(data); i++)
> data[i] &= ~ALARM_ENABLE_MASK;
>
> ret = regmap_bulk_write(info->max77686->rtc_regmap,
> - MAX77686_ALARM1_SEC, data, RTC_NR_TIME);
> + MAX77686_ALARM1_SEC, data, ARRAY_SIZE(data));
> if (ret < 0) {
> dev_err(info->dev, "%s: fail to write alarm reg(%d)\n",
> __func__, ret);
> @@ -291,7 +291,7 @@ static int max77686_rtc_start_alarm(struct max77686_rtc_info *info)
> goto out;
>
> ret = regmap_bulk_read(info->max77686->rtc_regmap,
> - MAX77686_ALARM1_SEC, data, RTC_NR_TIME);
> + MAX77686_ALARM1_SEC, data, ARRAY_SIZE(data));
> if (ret < 0) {
> dev_err(info->dev, "%s: fail to read alarm reg(%d)\n",
> __func__, ret);
> @@ -312,7 +312,7 @@ static int max77686_rtc_start_alarm(struct max77686_rtc_info *info)
> data[RTC_DATE] |= (1 << ALARM_ENABLE_SHIFT);
>
> ret = regmap_bulk_write(info->max77686->rtc_regmap,
> - MAX77686_ALARM1_SEC, data, RTC_NR_TIME);
> + MAX77686_ALARM1_SEC, data, ARRAY_SIZE(data));
> if (ret < 0) {
> dev_err(info->dev, "%s: fail to write alarm reg(%d)\n",
> __func__, ret);
> @@ -341,7 +341,7 @@ static int max77686_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
> goto out;
>
> ret = regmap_bulk_write(info->max77686->rtc_regmap,
> - MAX77686_ALARM1_SEC, data, RTC_NR_TIME);
> + MAX77686_ALARM1_SEC, data, ARRAY_SIZE(data));
>
> if (ret < 0) {
> dev_err(info->dev, "%s: fail to write alarm reg(%d)\n",
> @@ -406,7 +406,8 @@ static int max77686_rtc_init_reg(struct max77686_rtc_info *info)
>
> info->rtc_24hr_mode = 1;
>
> - ret = regmap_bulk_write(info->max77686->rtc_regmap, MAX77686_RTC_CONTROLM, data, 2);
> + ret = regmap_bulk_write(info->max77686->rtc_regmap,
> + MAX77686_RTC_CONTROLM, data, ARRAY_SIZE(data));
> if (ret < 0) {
> dev_err(info->dev, "%s: fail to write controlm reg(%d)\n",
> __func__, ret);
> --
> 2.5.0
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists