| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1453863463-30515-2-git-send-email-wenyou.yang@atmel.com>
Date: Wed, 27 Jan 2016 10:57:42 +0800
From: Wenyou Yang <wenyou.yang@...el.com>
To: Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
"Rob Herring" <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>
CC: Krzysztof Kozlowski <k.kozlowski@...sung.com>,
Javier Martinez Canillas <javier@...hile0.org>,
Lee Jones <lee.jones@...aro.org>,
Peter Korsgaard <jacmet@...il.com>,
Nicolas Ferre <nicolas.ferre@...el.com>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
Wenyou Yang <wenyou.yang@...el.com>
Subject: [PATCH v4 1/2] regulator: act8945a: add regulator driver for ACT8945A
This patch adds new regulator driver to support ACT8945A MFD
chip's regulators.
The ACT8945A has three step-down DC/DC converters and four
low-dropout regulators.
Signed-off-by: Wenyou Yang <wenyou.yang@...el.com>
---
Changes in v4:
- change the name "act8945a-pmic" to "act8945a-regulator"
to align mfd subdevice's name.
Changes in v3:
- use the core regulators_node and of_match implementation,
remove the redundant code.
- use the core dev_get_regmap(dev->parent) code, remove
the redundant code.
- change the regulator name to easily implement macro.
- use a space after #define, not tabs.
- add OF match table.
Changes in v2:
- add more help information in Kconfig.
- update the file header with short version license and author line.
- remove unused structure, struct act8945a_pmic.
- substitute of_property_read_bool() for of_get_property().
- due to removing the member of stuct act8945a_dev, dev.
- remove the unnecessary print out.
- use module_platform_driver(), instead of subsys_initcall().
- substitute MODULE_LICENSE("GPL") for MODULE_LICENSE("GPL v2").
drivers/regulator/Kconfig | 9 ++
drivers/regulator/Makefile | 1 +
drivers/regulator/act8945a-regulator.c | 172 ++++++++++++++++++++++++++++++++
3 files changed, 182 insertions(+)
create mode 100644 drivers/regulator/act8945a-regulator.c
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 8155e80..74a6354 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -78,6 +78,15 @@ config REGULATOR_ACT8865
This driver controls a active-semi act8865 voltage output
regulator via I2C bus.
+config REGULATOR_ACT8945A
+ tristate "Active-semi ACT8945A voltage regulator"
+ depends on MFD_ACT8945A
+ help
+ This driver controls a active-semi ACT8945A voltage regulator
+ via I2C bus. The ACT8945A features three step-down DC/DC converters
+ and four low-dropout linear regulators, along with a ActivePath
+ battery charger.
+
config REGULATOR_AD5398
tristate "Analog Devices AD5398/AD5821 regulators"
depends on I2C
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 980b194..348cfd7 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_REGULATOR_AAT2870) += aat2870-regulator.o
obj-$(CONFIG_REGULATOR_AB3100) += ab3100.o
obj-$(CONFIG_REGULATOR_AB8500) += ab8500-ext.o ab8500.o
obj-$(CONFIG_REGULATOR_ACT8865) += act8865-regulator.o
+obj-$(CONFIG_REGULATOR_ACT8945A) += act8945a-regulator.o
obj-$(CONFIG_REGULATOR_AD5398) += ad5398.o
obj-$(CONFIG_REGULATOR_ANATOP) += anatop-regulator.o
obj-$(CONFIG_REGULATOR_ARIZONA) += arizona-micsupp.o arizona-ldo1.o
diff --git a/drivers/regulator/act8945a-regulator.c b/drivers/regulator/act8945a-regulator.c
new file mode 100644
index 0000000..990f0b7
--- /dev/null
+++ b/drivers/regulator/act8945a-regulator.c
@@ -0,0 +1,172 @@
+/*
+ * Voltage regulation driver for active-semi ACT8945A PMIC
+ *
+ * Copyright (C) 2015 Atmel Corporation
+ *
+ * Author: Wenyou Yang <wenyou.yang@...el.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+
+/**
+ * ACT8945A Global Register Map.
+ */
+#define ACT8945A_SYS_MODE 0x00
+#define ACT8945A_SYS_CTRL 0x01
+#define ACT8945A_DCDC1_VSET1 0x20
+#define ACT8945A_DCDC1_VSET2 0x21
+#define ACT8945A_DCDC1_CTRL 0x22
+#define ACT8945A_DCDC2_VSET1 0x30
+#define ACT8945A_DCDC2_VSET2 0x31
+#define ACT8945A_DCDC2_CTRL 0x32
+#define ACT8945A_DCDC3_VSET1 0x40
+#define ACT8945A_DCDC3_VSET2 0x41
+#define ACT8945A_DCDC3_CTRL 0x42
+#define ACT8945A_LDO1_VSET 0x50
+#define ACT8945A_LDO1_CTRL 0x51
+#define ACT8945A_LDO2_VSET 0x54
+#define ACT8945A_LDO2_CTRL 0x55
+#define ACT8945A_LDO3_VSET 0x60
+#define ACT8945A_LDO3_CTRL 0x61
+#define ACT8945A_LDO4_VSET 0x64
+#define ACT8945A_LDO4_CTRL 0x65
+
+/**
+ * Field Definitions.
+ */
+#define ACT8945A_ENA 0x80 /* ON - [7] */
+#define ACT8945A_VSEL_MASK 0x3F /* VSET - [5:0] */
+
+/**
+ * ACT8945A Voltage Number
+ */
+#define ACT8945A_VOLTAGE_NUM 64
+
+enum {
+ ACT8945A_ID_DCDC1,
+ ACT8945A_ID_DCDC2,
+ ACT8945A_ID_DCDC3,
+ ACT8945A_ID_LDO1,
+ ACT8945A_ID_LDO2,
+ ACT8945A_ID_LDO3,
+ ACT8945A_ID_LDO4,
+ ACT8945A_REG_NUM,
+};
+
+static const struct regulator_linear_range act8945a_voltage_ranges[] = {
+ REGULATOR_LINEAR_RANGE(600000, 0, 23, 25000),
+ REGULATOR_LINEAR_RANGE(1200000, 24, 47, 50000),
+ REGULATOR_LINEAR_RANGE(2400000, 48, 63, 100000),
+};
+
+static struct regulator_ops act8945a_ops = {
+ .list_voltage = regulator_list_voltage_linear_range,
+ .map_voltage = regulator_map_voltage_linear_range,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+};
+
+#define ACT89xx_REG(_name, _family, _id, _vsel_reg, _supply) \
+ [_family##_ID_##_id] = { \
+ .name = _name, \
+ .supply_name = _supply, \
+ .of_match = of_match_ptr("REG_"#_id), \
+ .regulators_node = of_match_ptr("regulators"), \
+ .id = _family##_ID_##_id, \
+ .type = REGULATOR_VOLTAGE, \
+ .ops = &act8945a_ops, \
+ .n_voltages = ACT8945A_VOLTAGE_NUM, \
+ .linear_ranges = act8945a_voltage_ranges, \
+ .n_linear_ranges = ARRAY_SIZE(act8945a_voltage_ranges), \
+ .vsel_reg = _family##_##_id##_##_vsel_reg, \
+ .vsel_mask = ACT8945A_VSEL_MASK, \
+ .enable_reg = _family##_##_id##_CTRL, \
+ .enable_mask = ACT8945A_ENA, \
+ .owner = THIS_MODULE, \
+ }
+
+static const struct regulator_desc act8945a_regulators[] = {
+ ACT89xx_REG("DCDC_REG1", ACT8945A, DCDC1, VSET1, "vp1"),
+ ACT89xx_REG("DCDC_REG2", ACT8945A, DCDC2, VSET1, "vp2"),
+ ACT89xx_REG("DCDC_REG3", ACT8945A, DCDC3, VSET1, "vp3"),
+ ACT89xx_REG("LDO_REG1", ACT8945A, LDO1, VSET, "inl45"),
+ ACT89xx_REG("LDO_REG2", ACT8945A, LDO2, VSET, "inl45"),
+ ACT89xx_REG("LDO_REG3", ACT8945A, LDO3, VSET, "inl67"),
+ ACT89xx_REG("LDO_REG4", ACT8945A, LDO4, VSET, "inl67"),
+};
+
+static const struct regulator_desc act8945a_alt_regulators[] = {
+ ACT89xx_REG("DCDC_REG1", ACT8945A, DCDC1, VSET2, "vp1"),
+ ACT89xx_REG("DCDC_REG2", ACT8945A, DCDC2, VSET2, "vp2"),
+ ACT89xx_REG("DCDC_REG3", ACT8945A, DCDC3, VSET2, "vp3"),
+ ACT89xx_REG("LDO_REG1", ACT8945A, LDO1, VSET, "inl45"),
+ ACT89xx_REG("LDO_REG2", ACT8945A, LDO2, VSET, "inl45"),
+ ACT89xx_REG("LDO_REG3", ACT8945A, LDO3, VSET, "inl67"),
+ ACT89xx_REG("LDO_REG4", ACT8945A, LDO4, VSET, "inl67"),
+};
+
+static int act8945a_pmic_probe(struct platform_device *pdev)
+{
+ struct regulator_config config = { };
+ const struct regulator_desc *regulators;
+ struct regulator_dev *rdev;
+ int i, num_regulators;
+ bool voltage_select;
+
+ voltage_select = of_property_read_bool(pdev->dev.of_node,
+ "active-semi,vsel-high");
+
+ if (voltage_select) {
+ regulators = act8945a_alt_regulators;
+ num_regulators = ARRAY_SIZE(act8945a_alt_regulators);
+ } else {
+ regulators = act8945a_regulators;
+ num_regulators = ARRAY_SIZE(act8945a_regulators);
+ }
+
+ for (i = 0; i < num_regulators; i++) {
+ config.dev = &pdev->dev;
+
+ rdev = devm_regulator_register(&pdev->dev, ®ulators[i], &config);
+ if (IS_ERR(rdev)) {
+ dev_err(&pdev->dev,
+ "failed to register %s regulator\n",
+ regulators[i].name);
+ return PTR_ERR(rdev);
+ }
+ }
+
+ return 0;
+}
+
+static const struct of_device_id act8945a_pmic_of_match[] = {
+ { .compatible = "active-semi,act8945a-regulator" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, act8945a_pmic_of_match);
+
+static struct platform_driver act8945a_pmic_driver = {
+ .driver = {
+ .name = "act8945a-regulator",
+ .of_match_table = of_match_ptr(act8945a_pmic_of_match),
+ },
+ .probe = act8945a_pmic_probe,
+};
+module_platform_driver(act8945a_pmic_driver);
+
+MODULE_DESCRIPTION("Active-semi ACT8945A voltage regulator driver");
+MODULE_AUTHOR("Wenyou Yang <wenyou.yang@...el.com>");
+MODULE_LICENSE("GPL");
--
1.7.9.5
Powered by blists - more mailing lists