| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1454010273-21513-1-git-send-email-albeu@free.fr>
Date: Thu, 28 Jan 2016 20:44:29 +0100
From: Alban Bedel <albeu@...e.fr>
To: linux-gpio@...r.kernel.org
Cc: Linus Walleij <linus.walleij@...aro.org>,
Alexandre Courbot <gnurou@...il.com>,
Antony Pavlov <antonynpavlov@...il.com>,
Gabor Juhos <juhosg@...nwrt.org>, linux-kernel@...r.kernel.org,
Alban Bedel <albeu@...e.fr>
Subject: [PATCH 1/5] gpio: ath79: Move to the generic GPIO driver
Drop most of the code in favor of the generic MMIO GPIO driver.
As the driver now depend on CONFIG_GPIO_GENERIC also add a Kconfig
entry to make the driver optional.
We leave the base pointer and lock in the data struct because they are
needed for the IRQ support.
Signed-off-by: Alban Bedel <albeu@...e.fr>
---
drivers/gpio/Kconfig | 9 ++++
drivers/gpio/Makefile | 2 +-
drivers/gpio/gpio-ath79.c | 126 ++++++----------------------------------------
3 files changed, 24 insertions(+), 113 deletions(-)
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 00f1767..ee9909c 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -126,6 +126,15 @@ config GPIO_AMDPT
driver for GPIO functionality on Promontory IOHub
Require ACPI ASL code to enumerate as a platform device.
+config GPIO_ATH79
+ tristate "Atheros AR71XX/AR724X/AR913X GPIO support"
+ default y if ATH79
+ depends on ATH79
+ select GPIO_GENERIC
+ help
+ Select this option to enable GPIO driver for
+ Atheros AR71XX/AR724X/AR913X SoC devices.
+
config GPIO_BCM_KONA
bool "Broadcom Kona GPIO"
depends on OF_GPIO && (ARCH_BCM_MOBILE || COMPILE_TEST)
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index d4cc4f3..643b24e 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -24,7 +24,7 @@ obj-$(CONFIG_GPIO_ALTERA) += gpio-altera.o
obj-$(CONFIG_GPIO_AMD8111) += gpio-amd8111.o
obj-$(CONFIG_GPIO_AMDPT) += gpio-amdpt.o
obj-$(CONFIG_GPIO_ARIZONA) += gpio-arizona.o
-obj-$(CONFIG_ATH79) += gpio-ath79.o
+obj-$(CONFIG_GPIO_ATH79) += gpio-ath79.o
obj-$(CONFIG_GPIO_BCM_KONA) += gpio-bcm-kona.o
obj-$(CONFIG_GPIO_BRCMSTB) += gpio-brcmstb.o
obj-$(CONFIG_GPIO_BT8XX) += gpio-bt8xx.o
diff --git a/drivers/gpio/gpio-ath79.c b/drivers/gpio/gpio-ath79.c
index d13dd13..13d9648 100644
--- a/drivers/gpio/gpio-ath79.c
+++ b/drivers/gpio/gpio-ath79.c
@@ -19,115 +19,11 @@
#include <asm/mach-ath79/ar71xx_regs.h>
struct ath79_gpio_ctrl {
- struct gpio_chip chip;
+ struct gpio_chip gc;
void __iomem *base;
spinlock_t lock;
};
-static void ath79_gpio_set_value(struct gpio_chip *chip,
- unsigned gpio, int value)
-{
- struct ath79_gpio_ctrl *ctrl = gpiochip_get_data(chip);
-
- if (value)
- __raw_writel(BIT(gpio), ctrl->base + AR71XX_GPIO_REG_SET);
- else
- __raw_writel(BIT(gpio), ctrl->base + AR71XX_GPIO_REG_CLEAR);
-}
-
-static int ath79_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
-{
- struct ath79_gpio_ctrl *ctrl = gpiochip_get_data(chip);
-
- return (__raw_readl(ctrl->base + AR71XX_GPIO_REG_IN) >> gpio) & 1;
-}
-
-static int ath79_gpio_direction_input(struct gpio_chip *chip,
- unsigned offset)
-{
- struct ath79_gpio_ctrl *ctrl = gpiochip_get_data(chip);
- unsigned long flags;
-
- spin_lock_irqsave(&ctrl->lock, flags);
-
- __raw_writel(
- __raw_readl(ctrl->base + AR71XX_GPIO_REG_OE) & ~BIT(offset),
- ctrl->base + AR71XX_GPIO_REG_OE);
-
- spin_unlock_irqrestore(&ctrl->lock, flags);
-
- return 0;
-}
-
-static int ath79_gpio_direction_output(struct gpio_chip *chip,
- unsigned offset, int value)
-{
- struct ath79_gpio_ctrl *ctrl = gpiochip_get_data(chip);
- unsigned long flags;
-
- spin_lock_irqsave(&ctrl->lock, flags);
-
- if (value)
- __raw_writel(BIT(offset), ctrl->base + AR71XX_GPIO_REG_SET);
- else
- __raw_writel(BIT(offset), ctrl->base + AR71XX_GPIO_REG_CLEAR);
-
- __raw_writel(
- __raw_readl(ctrl->base + AR71XX_GPIO_REG_OE) | BIT(offset),
- ctrl->base + AR71XX_GPIO_REG_OE);
-
- spin_unlock_irqrestore(&ctrl->lock, flags);
-
- return 0;
-}
-
-static int ar934x_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
-{
- struct ath79_gpio_ctrl *ctrl = gpiochip_get_data(chip);
- unsigned long flags;
-
- spin_lock_irqsave(&ctrl->lock, flags);
-
- __raw_writel(
- __raw_readl(ctrl->base + AR71XX_GPIO_REG_OE) | BIT(offset),
- ctrl->base + AR71XX_GPIO_REG_OE);
-
- spin_unlock_irqrestore(&ctrl->lock, flags);
-
- return 0;
-}
-
-static int ar934x_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
- int value)
-{
- struct ath79_gpio_ctrl *ctrl = gpiochip_get_data(chip);
- unsigned long flags;
-
- spin_lock_irqsave(&ctrl->lock, flags);
-
- if (value)
- __raw_writel(BIT(offset), ctrl->base + AR71XX_GPIO_REG_SET);
- else
- __raw_writel(BIT(offset), ctrl->base + AR71XX_GPIO_REG_CLEAR);
-
- __raw_writel(
- __raw_readl(ctrl->base + AR71XX_GPIO_REG_OE) & ~BIT(offset),
- ctrl->base + AR71XX_GPIO_REG_OE);
-
- spin_unlock_irqrestore(&ctrl->lock, flags);
-
- return 0;
-}
-
-static const struct gpio_chip ath79_gpio_chip = {
- .label = "ath79",
- .get = ath79_gpio_get_value,
- .set = ath79_gpio_set_value,
- .direction_input = ath79_gpio_direction_input,
- .direction_output = ath79_gpio_direction_output,
- .base = 0,
-};
-
static const struct of_device_id ath79_gpio_of_match[] = {
{ .compatible = "qca,ar7100-gpio" },
{ .compatible = "qca,ar9340-gpio" },
@@ -174,15 +70,21 @@ static int ath79_gpio_probe(struct platform_device *pdev)
return -ENOMEM;
spin_lock_init(&ctrl->lock);
- memcpy(&ctrl->chip, &ath79_gpio_chip, sizeof(ctrl->chip));
- ctrl->chip.parent = &pdev->dev;
- ctrl->chip.ngpio = ath79_gpio_count;
- if (oe_inverted) {
- ctrl->chip.direction_input = ar934x_gpio_direction_input;
- ctrl->chip.direction_output = ar934x_gpio_direction_output;
+ err = bgpio_init(&ctrl->gc, &pdev->dev, 4,
+ ctrl->base + AR71XX_GPIO_REG_IN,
+ ctrl->base + AR71XX_GPIO_REG_SET,
+ ctrl->base + AR71XX_GPIO_REG_CLEAR,
+ oe_inverted ? NULL : ctrl->base + AR71XX_GPIO_REG_OE,
+ oe_inverted ? ctrl->base + AR71XX_GPIO_REG_OE : NULL,
+ 0);
+ if (err) {
+ dev_err(&pdev->dev, "bgpio_init failed\n");
+ return err;
}
+ /* Use base 0 to stay compatible with legacy platforms */
+ ctrl->gc.base = 0;
- err = gpiochip_add_data(&ctrl->chip, ctrl);
+ err = gpiochip_add_data(&ctrl->gc, ctrl);
if (err) {
dev_err(&pdev->dev,
"cannot add AR71xx GPIO chip, error=%d", err);
--
2.0.0
Powered by blists - more mailing lists