[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1454049768-30872-1-git-send-email-ykk@rock-chips.com>
Date: Fri, 29 Jan 2016 14:42:48 +0800
From: Yakir Yang <ykk@...k-chips.com>
To: Mark Yao <mark.yao@...k-chips.com>,
Heiko Stuebner <heiko@...ech.de>
Cc: David Airlie <airlied@...ux.ie>,
Thierry Reding <treding@...dia.com>,
Rob Herring <robh+dt@...nel.org>,
Ken Mixte <kmixter@...gle.com>, Ben Chan <benchan@...gle.com>,
Zheng Yang <zhengyang@...k-chips.com>,
Kumar Gala <galak@...eaurora.org>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
dri-devel@...ts.freedesktop.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-rockchip@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org,
Yakir Yang <ykk@...k-chips.com>
Subject: [PATCH v8 0/2] Add Rockchip Inno-HDMI driver
Here are a brief introduction to Innosilicon HDMI IP:
- Support HDMI 1.4a, HDCP 1.2 and DVI 1.0 standard compliant transmitter
- Support HDMI1.4 a/b 3D function defined in HDMI 1.4 a/b spec
- Digital video interface supports a pixel size of 24, 30, 36, 48bits color depth in RGB
- S/PDIF output supports PCM, Dolby Digital, DTS digital audio transmission
(32-192kHz Fs) using IEC60958 and IEC 61937
- The EDID and CEC function are also supported by Innosilicon HDMI Transmitter Controlle
Changes in v8:
- Don't check whether encoder output format is RGB colorspace, cause driver
default configure the output colorspace to RGB. (ZhengYang)
- Correct the check condition in inno_hdmi_config_video_csc() (ZhengYang)
- if (data->enc_out_format == data->enc_out_format) {
+ if (data->enc_in_format == data->enc_out_format) {
Changes in v7:
- Correct the module licnese statement (Paul)
- MODULE_LICENSE("GPL");
+ MODULE_LICENSE("GPLv2");
- Start indentation with tabs and fix the misspell in Kconfig (Paul)
- Carry the lost device-binding document (Heiko)
Changes in v6:
- Rebase the Makefile/Kconfig files which add by Chris's rockchip-mipi driver (Caeser)
Changes in v5:
- Use hdmi_infoframe helper functions to packed the infoframe (Russell)
- Remove the unused double wait_for_completion_timeout for ddc transfer (Russell)
- Remove the unused local variable in "inno_hdmi_i2c_write()" function (Russell)
Changes in v4:
- Modify the commit title "drm/rockchip: hdmi: ..." (Mark)
- Correct the "DKMS" to "DPMS" (Mark)
- Fix over 80 characters problems (Mark)
- Remove encoder .prepare/.commit helper functions, and move the vop mode
configure function into encoder .enable helper functions. (Mark)
Changes in v3:
- Use encoder enable/disable function, and remove the encoder DPMS function
- Keep HDMI PLL power on in standby mode
Changes in v2:
- Using DRM atomic helper functions for connector init (Mark)
- Remove "hdmi->connector.encoder = encoder;" (Mark)
- Add the Acked-by tags from Rob
- Correct the misspell "rk3036-dw-hdmi" (Heiko)
Yakir Yang (2):
drm/rockchip: hdmi: add Innosilicon HDMI support
dt-bindings: add document for Innosilicon HDMI on Rockchip platform
.../display/rockchip/inno_hdmi-rockchip.txt | 50 ++
drivers/gpu/drm/rockchip/Kconfig | 8 +
drivers/gpu/drm/rockchip/Makefile | 1 +
drivers/gpu/drm/rockchip/inno_hdmi.c | 939 +++++++++++++++++++++
drivers/gpu/drm/rockchip/inno_hdmi.h | 362 ++++++++
5 files changed, 1360 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/rockchip/inno_hdmi-rockchip.txt
create mode 100644 drivers/gpu/drm/rockchip/inno_hdmi.c
create mode 100644 drivers/gpu/drm/rockchip/inno_hdmi.h
--
1.9.1
Powered by blists - more mailing lists