| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1454053332-3218-7-git-send-email-xuejiancheng@huawei.com>
Date: Fri, 29 Jan 2016 15:42:12 +0800
From: Jiancheng Xue <xuejiancheng@...wei.com>
To: <mturquette@...libre.com>, <sboyd@...eaurora.org>,
<p.zabel@...gutronix.de>, <robh+dt@...nel.org>,
<pawel.moll@....com>, <mark.rutland@....com>,
<ijc+devicetree@...lion.org.uk>, <galak@...eaurora.org>,
<linux@....linux.org.uk>, <khilman@...aro.org>, <arnd@...db.de>,
<olof@...om.net>, <xuwei5@...ilicon.com>,
<haojian.zhuang@...aro.org>, <zhangfei.gao@...aro.org>,
<bintian.wang@...wei.com>
CC: <linux-kernel@...r.kernel.org>, <linux-clk@...r.kernel.org>,
<devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>, <yanhaifeng@...ilicon.com>,
<yanghongwei@...ilicon.com>, <suwenping@...ilicon.com>,
<raojun@...ilicon.com>, <ml.yang@...ilicon.com>,
<gaofei@...ilicon.com>, <zhangzhenxing@...ilicon.com>,
<xuejiancheng@...ilicon.com>, <lidongpo@...ilicon.com>,
Jiancheng Xue <xuejiancheng@...wei.com>
Subject: [PATCH v8 6/6] ARM: dts: add dts files for Hi3519
add dts files for Hi3519
Signed-off-by: Jiancheng Xue <xuejiancheng@...wei.com>
---
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/hi3519-demb.dts | 42 +++++++++
arch/arm/boot/dts/hi3519.dtsi | 187 ++++++++++++++++++++++++++++++++++++++
3 files changed, 231 insertions(+)
create mode 100644 arch/arm/boot/dts/hi3519-demb.dts
create mode 100644 arch/arm/boot/dts/hi3519.dtsi
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index a4a6d70..3ce36ff 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -141,6 +141,8 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \
exynos5800-peach-pi.dtb
dtb-$(CONFIG_ARCH_HI3xxx) += \
hi3620-hi4511.dtb
+dtb-$(CONFIG_ARCH_HISI) += \
+ hi3519-demb.dtb
dtb-$(CONFIG_ARCH_HIX5HD2) += \
hisi-x5hd2-dkb.dtb
dtb-$(CONFIG_ARCH_HIGHBANK) += \
diff --git a/arch/arm/boot/dts/hi3519-demb.dts b/arch/arm/boot/dts/hi3519-demb.dts
new file mode 100644
index 0000000..6991ab6
--- /dev/null
+++ b/arch/arm/boot/dts/hi3519-demb.dts
@@ -0,0 +1,42 @@
+/*
+ * Copyright (c) 2015 HiSilicon Technologies Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/dts-v1/;
+#include "hi3519.dtsi"
+
+/ {
+ model = "HiSilicon HI3519 DEMO Board";
+ compatible = "hisilicon,hi3519";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&dual_timer0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/hi3519.dtsi b/arch/arm/boot/dts/hi3519.dtsi
new file mode 100644
index 0000000..5729ecf
--- /dev/null
+++ b/arch/arm/boot/dts/hi3519.dtsi
@@ -0,0 +1,187 @@
+/*
+ * Copyright (c) 2015 HiSilicon Technologies Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#include <dt-bindings/clock/hi3519-clock.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chosen { };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0>;
+ };
+ };
+
+ gic: interrupt-controller@...00000 {
+ compatible = "arm,cortex-a7-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x10301000 0x1000>, <0x10302000 0x1000>;
+ };
+
+ clk_3m: clk_3m {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <3000000>;
+ };
+
+ crg: clock-reset-controller@...10000 {
+ compatible = "hisilicon,hi3519-crg";
+ #clock-cells = <1>;
+ #reset-cells = <2>;
+ reg = <0x12010000 0x10000>;
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&gic>;
+ ranges;
+
+ uart0: serial@...00000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x12100000 0x1000>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg HI3519_UART0_CLK>;
+ clock-names = "apb_pclk";
+ status = "disable";
+ };
+
+ uart1: serial@...01000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x12101000 0x1000>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg HI3519_UART1_CLK>;
+ clock-names = "apb_pclk";
+ status = "disable";
+ };
+
+ uart2: serial@...02000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x12102000 0x1000>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg HI3519_UART2_CLK>;
+ clock-names = "apb_pclk";
+ status = "disable";
+ };
+
+ uart3: serial@...03000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x12103000 0x1000>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg HI3519_UART3_CLK>;
+ clock-names = "apb_pclk";
+ status = "disable";
+ };
+
+ uart4: serial@...04000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x12104000 0x1000>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg HI3519_UART4_CLK>;
+ clock-names = "apb_pclk";
+ status = "disable";
+ };
+
+ dual_timer0: timer@...00000 {
+ compatible = "arm,sp804", "arm,primecell";
+ interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x12000000 0x1000>;
+ clocks = <&clk_3m>;
+ clock-names = "apb_pclk";
+ status = "disable";
+ };
+
+ dual_timer1: timer@...01000 {
+ compatible = "arm,sp804", "arm,primecell";
+ interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x12001000 0x1000>;
+ clocks = <&clk_3m>;
+ clock-names = "apb_pclk";
+ status = "disable";
+ };
+
+ dual_timer2: timer@...02000 {
+ compatible = "arm,sp804", "arm,primecell";
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x12002000 0x1000>;
+ clocks = <&clk_3m>;
+ clock-names = "apb_pclk";
+ status = "disable";
+ };
+
+ spi_bus0: spi@...20000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x12120000 0x1000>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg HI3519_SPI0_CLK>;
+ clock-names = "apb_pclk";
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disable";
+ };
+
+ spi_bus1: spi@...21000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x12121000 0x1000>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg HI3519_SPI1_CLK>;
+ clock-names = "apb_pclk";
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disable";
+ };
+
+ spi_bus2: spi@...22000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x12122000 0x1000>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg HI3519_SPI2_CLK>;
+ clock-names = "apb_pclk";
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disable";
+ };
+
+ sysctrl: system-controller@...20000 {
+ compatible = "hisilicon,hi3519-sysctrl", "syscon";
+ reg = <0x12020000 0x1000>;
+ };
+
+ reboot {
+ compatible = "syscon-reboot";
+ regmap = <&sysctrl>;
+ offset = <0x4>;
+ mask = <0xdeadbeef>;
+ };
+ };
+};
--
1.9.1
Powered by blists - more mailing lists