| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <tip-1e423bff959e48166f5b7efca01fdb0dbdf05846@git.kernel.org>
Date: Fri, 29 Jan 2016 03:36:53 -0800
From: tip-bot for Andy Lutomirski <tipbot@...or.com>
To: linux-tip-commits@...r.kernel.org
Cc: tglx@...utronix.de, torvalds@...ux-foundation.org, hpa@...or.com,
luto@...capital.net, peterz@...radead.org,
linux-kernel@...r.kernel.org, fweisbec@...il.com, luto@...nel.org,
dvlasenk@...hat.com, brgerst@...il.com, bp@...en8.de,
mingo@...nel.org
Subject: [tip:x86/asm] x86/entry/64:
Migrate the 64-bit syscall slow path to C
Commit-ID: 1e423bff959e48166f5b7efca01fdb0dbdf05846
Gitweb: http://git.kernel.org/tip/1e423bff959e48166f5b7efca01fdb0dbdf05846
Author: Andy Lutomirski <luto@...nel.org>
AuthorDate: Thu, 28 Jan 2016 15:11:28 -0800
Committer: Ingo Molnar <mingo@...nel.org>
CommitDate: Fri, 29 Jan 2016 09:46:38 +0100
x86/entry/64: Migrate the 64-bit syscall slow path to C
This is more complicated than the 32-bit and compat cases
because it preserves an asm fast path for the case where the
callee-saved regs aren't needed in pt_regs and no entry or exit
work needs to be done.
This appears to slow down fastpath syscalls by no more than one
cycle on my Skylake laptop.
Signed-off-by: Andy Lutomirski <luto@...nel.org>
Cc: Andy Lutomirski <luto@...capital.net>
Cc: Borislav Petkov <bp@...en8.de>
Cc: Brian Gerst <brgerst@...il.com>
Cc: Denys Vlasenko <dvlasenk@...hat.com>
Cc: Frederic Weisbecker <fweisbec@...il.com>
Cc: H. Peter Anvin <hpa@...or.com>
Cc: Linus Torvalds <torvalds@...ux-foundation.org>
Cc: Peter Zijlstra <peterz@...radead.org>
Cc: Thomas Gleixner <tglx@...utronix.de>
Link: http://lkml.kernel.org/r/ce2335a4d42dc164b24132ee5e8c7716061f947b.1454022279.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@...nel.org>
---
arch/x86/entry/common.c | 26 +++++++++++
arch/x86/entry/entry_64.S | 117 ++++++++++++++++------------------------------
2 files changed, 65 insertions(+), 78 deletions(-)
diff --git a/arch/x86/entry/common.c b/arch/x86/entry/common.c
index 0366374..75175f9 100644
--- a/arch/x86/entry/common.c
+++ b/arch/x86/entry/common.c
@@ -344,6 +344,32 @@ __visible inline void syscall_return_slowpath(struct pt_regs *regs)
prepare_exit_to_usermode(regs);
}
+#ifdef CONFIG_X86_64
+__visible void do_syscall_64(struct pt_regs *regs)
+{
+ struct thread_info *ti = pt_regs_to_thread_info(regs);
+ unsigned long nr = regs->orig_ax;
+
+ local_irq_enable();
+
+ if (READ_ONCE(ti->flags) & _TIF_WORK_SYSCALL_ENTRY)
+ nr = syscall_trace_enter(regs);
+
+ /*
+ * NB: Native and x32 syscalls are dispatched from the same
+ * table. The only functional difference is the x32 bit in
+ * regs->orig_ax, which changes the behavior of some syscalls.
+ */
+ if (likely((nr & __SYSCALL_MASK) < NR_syscalls)) {
+ regs->ax = sys_call_table[nr & __SYSCALL_MASK](
+ regs->di, regs->si, regs->dx,
+ regs->r10, regs->r8, regs->r9);
+ }
+
+ syscall_return_slowpath(regs);
+}
+#endif
+
#if defined(CONFIG_X86_32) || defined(CONFIG_IA32_EMULATION)
/*
* Does a 32-bit syscall. Called with IRQs on and does all entry and
diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S
index cb5d940..567aa52 100644
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -145,17 +145,11 @@ GLOBAL(entry_SYSCALL_64_after_swapgs)
movq %rsp, PER_CPU_VAR(rsp_scratch)
movq PER_CPU_VAR(cpu_current_top_of_stack), %rsp
+ TRACE_IRQS_OFF
+
/* Construct struct pt_regs on stack */
pushq $__USER_DS /* pt_regs->ss */
pushq PER_CPU_VAR(rsp_scratch) /* pt_regs->sp */
- /*
- * Re-enable interrupts.
- * We use 'rsp_scratch' as a scratch space, hence irq-off block above
- * must execute atomically in the face of possible interrupt-driven
- * task preemption. We must enable interrupts only after we're done
- * with using rsp_scratch:
- */
- ENABLE_INTERRUPTS(CLBR_NONE)
pushq %r11 /* pt_regs->flags */
pushq $__USER_CS /* pt_regs->cs */
pushq %rcx /* pt_regs->ip */
@@ -171,9 +165,21 @@ GLOBAL(entry_SYSCALL_64_after_swapgs)
pushq %r11 /* pt_regs->r11 */
sub $(6*8), %rsp /* pt_regs->bp, bx, r12-15 not saved */
- testl $_TIF_WORK_SYSCALL_ENTRY, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
- jnz tracesys
+ /*
+ * If we need to do entry work or if we guess we'll need to do
+ * exit work, go straight to the slow path.
+ */
+ testl $_TIF_WORK_SYSCALL_ENTRY|_TIF_ALLWORK_MASK, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
+ jnz entry_SYSCALL64_slow_path
+
entry_SYSCALL_64_fastpath:
+ /*
+ * Easy case: enable interrupts and issue the syscall. If the syscall
+ * needs pt_regs, we'll call a stub that disables interrupts again
+ * and jumps to the slow path.
+ */
+ TRACE_IRQS_ON
+ ENABLE_INTERRUPTS(CLBR_NONE)
#if __SYSCALL_MASK == ~0
cmpq $__NR_syscall_max, %rax
#else
@@ -193,88 +199,43 @@ entry_SYSCALL_64_fastpath:
movq %rax, RAX(%rsp)
1:
-/*
- * Syscall return path ending with SYSRET (fast path).
- * Has incompletely filled pt_regs.
- */
- LOCKDEP_SYS_EXIT
- /*
- * We do not frame this tiny irq-off block with TRACE_IRQS_OFF/ON,
- * it is too small to ever cause noticeable irq latency.
- */
- DISABLE_INTERRUPTS(CLBR_NONE)
/*
- * We must check ti flags with interrupts (or at least preemption)
- * off because we must *never* return to userspace without
- * processing exit work that is enqueued if we're preempted here.
- * In particular, returning to userspace with any of the one-shot
- * flags (TIF_NOTIFY_RESUME, TIF_USER_RETURN_NOTIFY, etc) set is
- * very bad.
+ * If we get here, then we know that pt_regs is clean for SYSRET64.
+ * If we see that no exit work is required (which we are required
+ * to check with IRQs off), then we can go straight to SYSRET64.
*/
+ DISABLE_INTERRUPTS(CLBR_NONE)
+ TRACE_IRQS_OFF
testl $_TIF_ALLWORK_MASK, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
- jnz int_ret_from_sys_call_irqs_off /* Go to the slow path */
+ jnz 1f
- RESTORE_C_REGS_EXCEPT_RCX_R11
- movq RIP(%rsp), %rcx
- movq EFLAGS(%rsp), %r11
+ LOCKDEP_SYS_EXIT
+ TRACE_IRQS_ON /* user mode is traced as IRQs on */
+ RESTORE_C_REGS
movq RSP(%rsp), %rsp
- /*
- * 64-bit SYSRET restores rip from rcx,
- * rflags from r11 (but RF and VM bits are forced to 0),
- * cs and ss are loaded from MSRs.
- * Restoration of rflags re-enables interrupts.
- *
- * NB: On AMD CPUs with the X86_BUG_SYSRET_SS_ATTRS bug, the ss
- * descriptor is not reinitialized. This means that we should
- * avoid SYSRET with SS == NULL, which could happen if we schedule,
- * exit the kernel, and re-enter using an interrupt vector. (All
- * interrupt entries on x86_64 set SS to NULL.) We prevent that
- * from happening by reloading SS in __switch_to. (Actually
- * detecting the failure in 64-bit userspace is tricky but can be
- * done.)
- */
USERGS_SYSRET64
-GLOBAL(int_ret_from_sys_call_irqs_off)
+1:
+ /*
+ * The fast path looked good when we started, but something changed
+ * along the way and we need to switch to the slow path. Calling
+ * raise(3) will trigger this, for example. IRQs are off.
+ */
TRACE_IRQS_ON
ENABLE_INTERRUPTS(CLBR_NONE)
- jmp int_ret_from_sys_call
-
- /* Do syscall entry tracing */
-tracesys:
SAVE_EXTRA_REGS
movq %rsp, %rdi
- call syscall_trace_enter
-
- /*
- * Reload registers from stack in case ptrace changed them.
- * We don't reload %rax because syscall_trace_enter() returned
- * the value it wants us to use in the table lookup.
- */
- RESTORE_C_REGS_EXCEPT_RAX
-#if __SYSCALL_MASK == ~0
- cmpq $__NR_syscall_max, %rax
-#else
- andl $__SYSCALL_MASK, %eax
- cmpl $__NR_syscall_max, %eax
-#endif
- ja 1f /* return -ENOSYS (already in pt_regs->ax) */
- movq %r10, %rcx /* fixup for C */
- call *sys_call_table(, %rax, 8)
- movq %rax, RAX(%rsp)
- RESTORE_EXTRA_REGS
-1:
- /* Use IRET because user could have changed pt_regs->foo */
+ call syscall_return_slowpath /* returns with IRQs disabled */
+ jmp return_from_SYSCALL_64
-/*
- * Syscall return path ending with IRET.
- * Has correct iret frame.
- */
-GLOBAL(int_ret_from_sys_call)
+entry_SYSCALL64_slow_path:
+ /* IRQs are off. */
SAVE_EXTRA_REGS
movq %rsp, %rdi
- call syscall_return_slowpath /* returns with IRQs disabled */
+ call do_syscall_64 /* returns with IRQs disabled */
+
+return_from_SYSCALL_64:
RESTORE_EXTRA_REGS
TRACE_IRQS_IRETQ /* we're about to change IF */
@@ -364,7 +325,7 @@ ENTRY(stub_ptregs_64)
/* Called from fast path -- pop return address and jump to slow path */
popq %rax
- jmp tracesys /* called from fast path */
+ jmp entry_SYSCALL64_slow_path /* called from fast path */
1:
/* Called from C */
Powered by blists - more mailing lists